DIY: Engine and Transmission mounts

ZoomZ · 03-26-2023, 01:56 PM

Any negative impact on changing only the Transmission mount and not engine mounts at same time?

I bought the Torque Solution Trans. mount. They don't make eng. mounts.

Is Z1 the only viable option for engine mounts?

I have read and seen Drop Engineering, which is a better match for the TS Tranny mount as they are both 75A hardness. (vs Z1 which is 70A...am I splitting hairs

)

I read an early thread about their demise on a SC 370z.

Theres also BDE:

https://www.bde-performance.com/mounts2.htm

but they are 88A hardness and probably overkill. Nice looking though, and they have factory tabs for easier install.

TIA

zz

03-26-2023, 01:56 PM	#1 (permalink)
ZoomZ Track Member Join Date: Jan 2017 Location: Vancouver, BC Posts: 779 Drives: 17' 370Z Nismo Rep Power: 40618	Any negative impact on changing only the Transmission mount and not engine mounts at same time? I bought the Torque Solution Trans. mount. They don't make eng. mounts. Is Z1 the only viable option for engine mounts? I have read and seen Drop Engineering, which is a better match for the TS Tranny mount as they are both 75A hardness. (vs Z1 which is 70A...am I splitting hairs ) I read an early thread about their demise on a SC 370z. Theres also BDE: https://www.bde-performance.com/mounts2.htm but they are 88A hardness and probably overkill. Nice looking though, and they have factory tabs for easier install. TIA zz Last edited by ZoomZ; 03-26-2023 at 02:00 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Drop Engineering Engine Mounts	KamiSpeed	Engine & Drivetrain	119	03-11-2017 03:49 PM
Transmission and Motor Mounts?	Akmcmahon	Engine & Drivetrain	35	10-19-2014 09:28 AM
Engine/Transmission/etc reliability + FI	awkwardturtle	Forced Induction	24	11-15-2011 05:20 PM