Cubby Tablet Mounting Bezel

kenchan · 07-18-2014, 11:41 AM

if that was $35 (aka price of metra trim kit or something) then i might consider buying it as a starting point.

the idea is good btw.

ZoroItaliano · 12-02-2014, 01:22 PM

Quote:

Originally Posted by ltullos

I have my Nexus 7 connected to my Bose head unit through a USB DAC which frees up my Bluetooth for OBD and also gives much higher quality audio connection. I mostly stream Pandora or Rhapsody from WiFi, but could just as easily save my music on my Nexus 7 or even just put it on a thumb drive and plug into USB Hub.

To describe in more detail, I have a OTG Y-cable coming off the Nexus 7 with one leg of the Y connected to the USB Hub output. The other leg connects to the 2A charging port on the USB hub. The USB DAC input connects to one of the hub inputs, and the USB DAC output connects to the Aux-In input of the head unit through a standard 3.5mm stereo cable. Since my Bose head unit did not include a rear Aux-In input, I patched one in which was very simple to do.

I have to point out that this configuration requires installing a custom ROM described here. This enables the Nexus 7 to simultaneously charge and operate in Host mode for the USB hub. It also enables the USB audio.

Besides selling the tablet mounting bezel, I am planning to offer kits that provide this unique capability, and I'm currently working on the website which will provide step-by-step guides for completing the full installation and expect to have this open by July 4th.

that all makes sense. Only issue I see in my setup is that sometimes... The USB input cable that is connected to the kenwood DNX7140 doesn't always recognize the USB devices and reads an error message along the lines of "USB 1.1 not recognized". What I really need is to talk to an audio/kenwood expert on this. I do know that the unit is a couple years old now and that it was compatible with the ipods and iphones that were out during that time. maybe it has something to do with that. It also makes me think twice of purchasing a tablet for that reason alone.

ltullos · 12-08-2014, 10:33 PM

My 3D printer has reworked their pricing model which has enable me to drop the UNFINISHED Tablet Mounting Bezel from $300 to $185. This is offered for the DIY guys looking to save money or that want a different finish.

You can find more details at my website or PM me with your questions.

12-08-2014, 10:33 PM	#48 (permalink)
ltullos Enthusiast Member Join Date: Feb 2011 Location: DFW Posts: 312 Drives: 2016 Nismo Tech MT Rep Power: 14	Price drop alert My 3D printer has reworked their pricing model which has enable me to drop the UNFINISHED Tablet Mounting Bezel from $300 to $185. This is offered for the DIY guys looking to save money or that want a different finish. You can find more details at my website or PM me with your questions.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Cubby Tablet (iPad Mini)	Bandit_Kaine	Exterior & Interior	31	09-04-2013 01:30 AM
Another Tablet Cubby Thread (Nexus 7)	Mr&Mrs	Exterior & Interior	82	06-29-2013 01:27 PM
Mounting display on cubby door?	SS_Firehawk	Audio & Video	4	05-25-2013 06:41 PM
7 inch tablet installed in cubby hole	Eighties Meta	Exterior & Interior	3	05-09-2013 08:47 PM
WTB: Shifter Bezel	nismored	Wanted	0	03-30-2009 05:54 PM

07-18-2014, 11:41 AM	#46 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	if that was $35 (aka price of metra trim kit or something) then i might consider buying it as a starting point. the idea is good btw.