Did you get this mod done? The easiest way to do this is cut the red and tan wires, twist them together crimp it to a jumper wire. crimp a
|
|
LinkBack | Thread Tools | Display Modes |
08-02-2017, 05:20 PM | #106 (permalink) |
Base Member
Join Date: Jul 2017
Location: Reno, Nevada
Age: 54
Posts: 64
Drives: 14 370z SportTouring
Rep Power: 8 |
Did you get this mod done? The easiest way to do this is cut the red and tan wires, twist them together crimp it to a jumper wire. crimp a cut down spade connector on the other end of the jumper wire and insert it to the open relay slot. tape up the red and tan wires coming out of the connector and you are done.
__________________
USCG Veteran, 2014 370Z Touring, Sport, Nav, Stillen G3 intakes, Berk HFC, Invidia Gemini CBE, Hella Supertones |
08-03-2017, 12:07 PM | #107 (permalink) |
Base Member
Join Date: Jul 2017
Location: Toronto
Posts: 9
Drives: 13 Nissan 370z
Rep Power: 8 |
Yeah, I went ahead and cut the red and beige wire instead of pulling them out. Now just hope the spade connector stays in the relay port as some other users here had issues with that.
|
08-03-2017, 12:51 PM | #108 (permalink) |
Base Member
Join Date: Jul 2017
Location: Reno, Nevada
Age: 54
Posts: 64
Drives: 14 370z SportTouring
Rep Power: 8 |
Now that I have done this mod. I am noticing other cars with lights in the same configuration. The local cab company uses the boxy Scions and they have the same light config. And saw some 4dr the other night with led lights that run vertical also.
__________________
USCG Veteran, 2014 370Z Touring, Sport, Nav, Stillen G3 intakes, Berk HFC, Invidia Gemini CBE, Hella Supertones |
01-27-2018, 02:46 PM | #113 (permalink) |
Base Member
Join Date: Jan 2015
Location: West Palm Beach
Posts: 62
Drives: 2015 Nismo PW 7AT
Rep Power: 10 |
Just did the mod. Very easy. Hardest part was getting the IDPM cover off. Haha. I cut the red and beige wires and just taped them off in case I wanted to go back to the original way.
|
03-01-2018, 09:54 PM | #115 (permalink) |
Track Member
Join Date: May 2016
Location: Central Florida
Age: 49
Posts: 965
Drives: 2016 370Z GM 6MT
Rep Power: 2301 |
I know this is an old thread that keeps getting resurfaced, but I do have a question.
I know there are two ways of having the DRL's stay on with the headlights. One can wire them through the IDPM or they can do it through the fender well at the parking light buld wiring harness. My question is, and I already think I know the answer... But if doing this mod at the parking light bulb harness behind the headlight, then for all practical purposes, if I shut the car off then turn it back on (with the hand break on), then the DRL's should stay off just like stock until I release the hand break. Correct? That's the way I would prefer it to be. Sometimes I like to sit in the car with the engine running with the DRL's off. BTW, the way I want to do this mod is the same as that of the iJDM kit. http://store.ijdmtoy.com/Nissan-370z...tion-a/578.htm
__________________
She's For Sale! PERFORMANCE: Aero Workz | Akebono | BC Racing | EcuTek | HKS | MaxBore | Motordyne | Nismo | RJM | SPL | StopTech | Z1 AUDIO: Arc Audio | Bazooka | Helix | Pioneer | Stereo Integrity Last edited by ChopsZ; 03-01-2018 at 10:37 PM. |
03-02-2018, 01:34 PM | #116 (permalink) |
Track Member
Join Date: May 2016
Location: Central Florida
Age: 49
Posts: 965
Drives: 2016 370Z GM 6MT
Rep Power: 2301 |
???
__________________
She's For Sale! PERFORMANCE: Aero Workz | Akebono | BC Racing | EcuTek | HKS | MaxBore | Motordyne | Nismo | RJM | SPL | StopTech | Z1 AUDIO: Arc Audio | Bazooka | Helix | Pioneer | Stereo Integrity |
03-02-2018, 09:19 PM | #117 (permalink) | |||
Base Member
Join Date: Jan 2018
Location: FL
Age: 49
Posts: 91
Drives: 16 370z KAD GunM 7AT
Rep Power: 663 |
Quote:
Quote:
Quote:
The relay that engages DRL disengages power when headlights/parking lights turn on. Without a diode, you feeding power back into the parking light circuit because you are tapping in after relay IPDM method does not allow for turning off unless at a switch, but does not risk circuit jumping either Last edited by Buzzkill247; 03-02-2018 at 09:45 PM. |
|||
Bookmarks |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[WTB] Headlights | EastcoastZ | Parts for sale (Private Classifieds) | 0 | 07-11-2013 10:09 AM |
[WTB] Trade tinted headlights for clear headlights | ShoFamous | Parts for sale (Private Classifieds) | 11 | 04-27-2012 02:54 PM |
[WTB] Headlights | Dwv2005 | Parts for sale (Private Classifieds) | 0 | 03-06-2012 12:39 AM |
Headlights | cfleming2226 | Exterior & Interior | 1 | 01-30-2012 07:40 PM |
WTT: my PG painted headlights for your stock headlights | Cjanik | Parts for sale (Private Classifieds) | 15 | 10-27-2010 03:28 PM |