Nissan 370Z Forum  

DRL on with headlights MOD

Cool. Will do this in April or May once the snow has melted, the salt is washed off the roads and the Z is outta storage.

Go Back   Nissan 370Z Forum > Nissan 370Z Tech Area > DIY Section (Do-It-Yourself)


Like Tree91Likes

Reply
 
LinkBack Thread Tools Display Modes
Old 11-20-2015, 04:04 PM   #61 (permalink)
A True Z Fanatic
 
Nixin's Avatar
 
Join Date: Sep 2015
Location: GWN
Posts: 3,488
Drives: Goodbye Z!
Rep Power: 19833
Nixin has a reputation beyond reputeNixin has a reputation beyond reputeNixin has a reputation beyond reputeNixin has a reputation beyond reputeNixin has a reputation beyond reputeNixin has a reputation beyond reputeNixin has a reputation beyond reputeNixin has a reputation beyond reputeNixin has a reputation beyond reputeNixin has a reputation beyond reputeNixin has a reputation beyond repute
Default

Cool. Will do this in April or May once the snow has melted, the salt is washed off the roads and the Z is outta storage.
Nixin is offline   Reply With Quote
Old 12-01-2015, 11:33 PM   #62 (permalink)
Enthusiast Member
 
Join Date: Jun 2014
Location: Chicago
Posts: 265
Drives: 15 Nismo Z Tech
Rep Power: 11
BrockDM1 is on a distinguished road
Default

Does anyone know if this works on the 2015 Nismo??
BrockDM1 is offline   Reply With Quote
Old 12-02-2015, 12:51 AM   #63 (permalink)
Base Member
 
sixspeeddemon's Avatar
 
Join Date: Jun 2015
Location: Fort Washington
Posts: 82
Drives: 2015 370z sport tech
Rep Power: 10
sixspeeddemon is on a distinguished road
Default

Quote:
Originally Posted by BrockDM1 View Post
Does anyone know if this works on the 2015 Nismo??

Yes. It's the same car as a non nismo minus a few exterior mods and exhaust. It will work just fine.


Sent from my iPad using Tapatalk
BrockDM1 likes this.
sixspeeddemon is offline   Reply With Quote
Old 12-10-2015, 12:16 AM   #64 (permalink)
Base Member
 
Ghh0st's Avatar
 
Join Date: Nov 2015
Location: NY
Posts: 79
Drives: '13 370z WP 6MT
Rep Power: 10
Ghh0st has much to be proud ofGhh0st has much to be proud ofGhh0st has much to be proud ofGhh0st has much to be proud ofGhh0st has much to be proud ofGhh0st has much to be proud ofGhh0st has much to be proud ofGhh0st has much to be proud ofGhh0st has much to be proud ofGhh0st has much to be proud of
Default

Quote:
Originally Posted by 14BlackCherry View Post
Just thought I would add a quick addendum for anyone else doing this mod.

The electrical connector that worked for me was a 1/4" however I needed to file 1/16th off for it to fit snugly in the fuse box. I'll update if it loosens up. I think it will be okay though because it requires needle nose pliers to remove from the relay port.

Before:



After:



Night shot:

Thank you for this! I've been wanting to do this with my Z I just bought, but I didn't know the size of the spade connector.
Ghh0st is offline   Reply With Quote
Old 12-11-2015, 08:57 PM   #65 (permalink)
Enthusiast Member
 
Join Date: Jun 2014
Location: Chicago
Posts: 265
Drives: 15 Nismo Z Tech
Rep Power: 11
BrockDM1 is on a distinguished road
Default

Great write up. Did it on my 2015 Nismo

Powerwiz, NismOrly22 and simul8r like this.
BrockDM1 is offline   Reply With Quote
Old 12-13-2015, 12:35 PM   #66 (permalink)
Base Member
 
Join Date: Nov 2015
Location: Ny
Posts: 5
Drives: 2015 370z
Rep Power: 9
Ricks is on a distinguished road
Default

Finally did this mod works awesome thank you!!!!
Ricks is offline   Reply With Quote
Old 12-15-2015, 07:57 PM   #67 (permalink)
Base Member
 
Join Date: Jul 2015
Location: Central Florida
Posts: 130
Drives: 2015 370Z
Rep Power: 10
Apex2Apex is on a distinguished road
Default

Finished this mod this evening. Hardest part was getting the connector to fit.
Apex2Apex is offline   Reply With Quote
Old 01-08-2016, 09:01 PM   #68 (permalink)
A True Z Fanatic
 
MagmaRed370z's Avatar
 
Join Date: Jun 2014
Location: USA
Posts: 1,468
Drives: 14' 370z Sport Magma
Rep Power: 13
MagmaRed370z will become famous soon enough
Default

Sorry for my big stupid ignorance. But how the heck do I do this? Read the whole 5 pages and I'm so confused.

So get to the box
Find the red and baige wires
Cut each in half? Then what?

Sorry need a step by step picture guide. Anybody want to help a wiring noob? I wish there would be a video or a step by step detailed guide.
Mike Tree likes this.
__________________
Sold: 2014 Magnetic Black Base.
Current: 2014 Magma Red 370z Sport | ARK Grip Exhaust | 25mm HR Spacers | GTR Button | DRL Mod
MagmaRed370z is offline   Reply With Quote
Old 01-09-2016, 10:45 AM   #69 (permalink)
Enthusiast Member
 
Kabestro's Avatar
 
Join Date: Aug 2012
Location: Puerto Rico
Posts: 331
Drives: 13 Nissan 370Z MR M6
Rep Power: 40
Kabestro has a reputation beyond reputeKabestro has a reputation beyond reputeKabestro has a reputation beyond reputeKabestro has a reputation beyond reputeKabestro has a reputation beyond reputeKabestro has a reputation beyond reputeKabestro has a reputation beyond reputeKabestro has a reputation beyond reputeKabestro has a reputation beyond reputeKabestro has a reputation beyond reputeKabestro has a reputation beyond repute
Default

Quote:
Originally Posted by schellingr View Post
Sorry for my big stupid ignorance. But how the heck do I do this? Read the whole 5 pages and I'm so confused.

So get to the box
Find the red and baige wires
Cut each in half? Then what?

Sorry need a step by step picture guide. Anybody want to help a wiring noob? I wish there would be a video or a step by step detailed guide.
So, most people cut the wires, I didn't. I took my time and opened the connector and with a small (very small) flat head screwdriver took out the red and beige wires with their connectors. Tied the two together with some 18 gauge wire (I think) and the other end to a flat connector and stuck it in the plug. cover everything with electrical tape or plastic covers.
Attached Images
File Type: jpg 2015-05-31 15.33.10.jpg (386.7 KB, 256 views)
File Type: jpg IMG_0006.JPG (643.5 KB, 257 views)
__________________
Stillen Gen 3 CAI / Fast Intentions HFC and CBE 12" Res. (#730) / Swift Springs / 20mm H&R Spacers / Clutch Helper Spring / UpRev Tune 322whp.
Kabestro is offline   Reply With Quote
Old 01-26-2016, 10:27 AM   #70 (permalink)
Base Member
 
Join Date: Dec 2014
Location: El Paso
Posts: 120
Drives: 2015 Nissan 370Z MT
Rep Power: 10
Powerwiz is on a distinguished road
Default

Quote:
Originally Posted by schellingr View Post
Sorry for my big stupid ignorance. But how the heck do I do this? Read the whole 5 pages and I'm so confused.

So get to the box
Find the red and baige wires
Cut each in half? Then what?

Sorry need a step by step picture guide. Anybody want to help a wiring noob? I wish there would be a video or a step by step detailed guide.
This is very simple to do...like 30 mins of your life perhaps a hour if you never have.

Essentially your cutting the two wires involved with DRL in IPDM box which is essentially a wiring junction box. Nissan for whatever reason created a complicated circuit that determines when your DRL are on or off. Kinda of puzzling since usually a engineer takes the easiest path for design.

You first step should be disconnecting the battery.

Find the two wires that provide power and ground to the DRL..the guides on this site point them out. When you cut them you will have 2 loose wires and the two stubs that are plugged in. For myself I just electrical taped wrapped the ends that are still plugged in.

You you need to remove some of the wire's insulation. You can do this with a tool designed for that or use like a razor blade. Twist the wires together then insert them into a spade connector.

Your DRL require 12 volts and there happens to be a 12 volt port with nothing in it. You take your spade connector and put into that slot. Thats it. Its simple.

Probably the hardest part is finding that spade connector that will stay in that slot. The one I had was slightly to wide so I trimmed it down some and inserted it.

Easy peasy.
DreamVivid likes this.
__________________
2015 370z Touring 6MT Black Metallic | Stillen Gen 3 CAI | Ark Performance DT-S exhaust
Powerwiz is offline   Reply With Quote
Old 01-26-2016, 05:17 PM   #71 (permalink)
Enthusiast Member
 
Join Date: Apr 2013
Location: Kimberley, BC, CANADA
Posts: 447
Drives: 13 370Z BS M6 Sport
Rep Power: 439
40 to 332 has a reputation beyond repute40 to 332 has a reputation beyond repute40 to 332 has a reputation beyond repute40 to 332 has a reputation beyond repute40 to 332 has a reputation beyond repute40 to 332 has a reputation beyond repute40 to 332 has a reputation beyond repute40 to 332 has a reputation beyond repute40 to 332 has a reputation beyond repute40 to 332 has a reputation beyond repute40 to 332 has a reputation beyond repute
Default

Well, here's a question for the automotive wiring geniuses. I like the idea of wiring the DRL so that they stay on when the headlights are on … and it seems like a pretty simple wiring job based on the above DIYs. However, is there a simple way to wire the DRL so that they stay on with the low beams, but turn off with the high beams (… much like front fog lights typically do)?
40 to 332 is offline   Reply With Quote
Old 01-27-2016, 05:56 AM   #72 (permalink)
Base Member
 
Join Date: Dec 2014
Location: El Paso
Posts: 120
Drives: 2015 Nissan 370Z MT
Rep Power: 10
Powerwiz is on a distinguished road
Default

Quote:
Originally Posted by 40 to 332 View Post
Well, here's a question for the automotive wiring geniuses. I like the idea of wiring the DRL so that they stay on when the headlights are on … and it seems like a pretty simple wiring job based on the above DIYs. However, is there a simple way to wire the DRL so that they stay on with the low beams, but turn off with the high beams (… much like front fog lights typically do)?
Not with that method. You would have to design the circuit to do that which would require some doing. The method described above bypasses Nissan's circuit and applies a continious 12volts to the LEDs while the car is on. The two are independent.
__________________
2015 370z Touring 6MT Black Metallic | Stillen Gen 3 CAI | Ark Performance DT-S exhaust
Powerwiz is offline   Reply With Quote
Old 02-07-2016, 04:48 PM   #73 (permalink)
A True Z Fanatic
 
MagmaRed370z's Avatar
 
Join Date: Jun 2014
Location: USA
Posts: 1,468
Drives: 14' 370z Sport Magma
Rep Power: 13
MagmaRed370z will become famous soon enough
Default

Quote:
Originally Posted by Kabestro View Post
So, most people cut the wires, I didn't. I took my time and opened the connector and with a small (very small) flat head screwdriver took out the red and beige wires with their connectors. Tied the two together with some 18 gauge wire (I think) and the other end to a flat connector and stuck it in the plug. cover everything with electrical tape or plastic covers.

Thank you for the pics! I so get it now


Quote:
Originally Posted by Powerwiz View Post
This is very simple to do...like 30 mins of your life perhaps a hour if you never have.

Essentially your cutting the two wires involved with DRL in IPDM box which is essentially a wiring junction box. Nissan for whatever reason created a complicated circuit that determines when your DRL are on or off. Kinda of puzzling since usually a engineer takes the easiest path for design.

You first step should be disconnecting the battery.

Find the two wires that provide power and ground to the DRL..the guides on this site point them out. When you cut them you will have 2 loose wires and the two stubs that are plugged in. For myself I just electrical taped wrapped the ends that are still plugged in.

You you need to remove some of the wire's insulation. You can do this with a tool designed for that or use like a razor blade. Twist the wires together then insert them into a spade connector.

Your DRL require 12 volts and there happens to be a 12 volt port with nothing in it. You take your spade connector and put into that slot. Thats it. Its simple.

Probably the hardest part is finding that spade connector that will stay in that slot. The one I had was slightly to wide so I trimmed it down some and inserted it.

Easy peasy.

Thanks for the explanation. Will definitely do this later today!
__________________
Sold: 2014 Magnetic Black Base.
Current: 2014 Magma Red 370z Sport | ARK Grip Exhaust | 25mm HR Spacers | GTR Button | DRL Mod
MagmaRed370z is offline   Reply With Quote
Old 02-19-2016, 06:33 PM   #74 (permalink)
A True Z Fanatic
 
MagmaRed370z's Avatar
 
Join Date: Jun 2014
Location: USA
Posts: 1,468
Drives: 14' 370z Sport Magma
Rep Power: 13
MagmaRed370z will become famous soon enough
Default

Today was the day. Finally completed it. Thanks for the instructions.

NismOrly22 likes this.
__________________
Sold: 2014 Magnetic Black Base.
Current: 2014 Magma Red 370z Sport | ARK Grip Exhaust | 25mm HR Spacers | GTR Button | DRL Mod
MagmaRed370z is offline   Reply With Quote
Old 02-20-2016, 09:21 PM   #75 (permalink)
Base Member
 
JohnTrang's Avatar
 
Join Date: Sep 2014
Location: North Alabama
Age: 52
Posts: 47
Drives: 2015 370Z Sport Tech
Rep Power: 11
JohnTrang is on a distinguished road
Default

Thanks 370zlvr, your route was the easiest way to do it!

Here are some additional pictures.

Update:
Check out my album for even more pictures:
http://www.the370z.com/members/johnt...s-drl-mod.html
Attached Images
File Type: jpg 010.JPG (577.4 KB, 247 views)
File Type: jpg 040.JPG (345.7 KB, 252 views)
File Type: jpg 083.JPG (215.0 KB, 194 views)
File Type: jpg 095.JPG (517.9 KB, 250 views)

Last edited by JohnTrang; 03-13-2016 at 09:18 PM.
JohnTrang is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[WTB] Headlights EastcoastZ Parts for sale (Private Classifieds) 0 07-11-2013 10:09 AM
[WTB] Trade tinted headlights for clear headlights ShoFamous Parts for sale (Private Classifieds) 11 04-27-2012 02:54 PM
[WTB] Headlights Dwv2005 Parts for sale (Private Classifieds) 0 03-06-2012 12:39 AM
Headlights cfleming2226 Exterior & Interior 1 01-30-2012 07:40 PM
WTT: my PG painted headlights for your stock headlights Cjanik Parts for sale (Private Classifieds) 15 10-27-2010 03:28 PM


All times are GMT -5. The time now is 08:41 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2