Disable Abs

dimitarm

Hello,
I finally figured it out how to disable abs unit and put a switch so you can turn it on/off whenever you want!

Things that you will need for this mod:
1. Oem fuse replacement (you can buy it online for 4 usd)
2. 30 amp fuse (universal)
3. On/off Switch

First, remove the battery cover.

Then locate the fusebox !

On the top of the fusebox cover, in the lower right corner there is the abs fuse shown.

Remove the fusebox cover!

Actually you can see that the abs actuator fuse sits in the middle with 2 other fuses. You will need the abs actuator fuse.

Remove the oem fuse and remove the top plastic cover of the fuse. Cut the fuse wire and then put two wires on each side! One on each side. Connect the 30 amp universal fuse to one of the wires so u can keep the abs unit safe.

The next step is to bring the wires inside the car which is pretty easy.

Remove the plastics and covers around the battery and then in the left corner you will see a cable going inside the car.the cable is secured with grommet around it.You will have to remove the grommet and put the wire inside the car. You should see the wires coming out just below the glove box.

Then just put a switch on the wires and the work is done.

NOTE!

1. If you use led switch dont connect the grounding because the led will stay on even when you turn the car off.

2. You can deactivate the abs when the car is on, but you must restart the car in order to re - activate the abs unit!

Sorry for my english, if anyone has questions feel free to pm me!

Special thanks to SouthArk370Z. He helped me figure out this mod

Attached Images

	n.JPG (547.6 KB, 63 views)
	File0005.JPG (636.7 KB, 52 views)
	sd.JPG (344.5 KB, 57 views)
	File0007.JPG (284.7 KB, 68 views)
	File0008.JPG (467.1 KB, 63 views)
	File0003.JPG (294.9 KB, 50 views)
	File0006.JPG (84.9 KB, 64 views)
	sdf.JPG (432.3 KB, 66 views)
	File0001.JPG (515.6 KB, 65 views)