[DIY] Install Rearview Camera for Stock Nav (2010)

ins_man · 10-29-2017, 12:10 AM

Thanks. I gave up after a few failed attempts and even put the whole dash back together. Today, I decided to try one more time. Worked like a charm. The only other question is ... does anyone know how to turn on the active guidelines within the factory Nav unit?

ins_man · 10-31-2017, 05:51 PM

Bump... Does anyone know how to activate the backup camera guidelines on the OEM navigation unit?

l2iceman · 10-31-2017, 06:49 PM

Quote:

Originally Posted by ins_man

Bump... Does anyone know how to activate the backup camera guidelines on the OEM navigation unit?

Here you go, once you access this menu, there are options to turn on oem guidelines.

With Radio off
Press and hold the “Settings” button and turn the volume control counter clockwise.
After about 40 clicks a menu will appear
Select “confirmation/adjustment”*
Next move down to “Camera” and select*
Then select “Camera Syst Type” and change from “No Camera” to “With Rear view Camera”
Come all the way out of the menus using the back button and the system will reboot
Now when you put the car in reverse, if a blue screen appears with*“Please check your surroundings”*message your car is compatible

Sent from my SM-N920W8 using Tapatalk

ins_man · 11-02-2017, 12:59 AM

I did all of that. I now have a back up camera but no guide lines.

ins_man · 11-02-2017, 01:03 AM

I did all of that. I now have a backup camera but no guide lines. I didn't see anything in settings to activate them.

l2iceman · 11-02-2017, 06:36 AM

Quote:

Originally Posted by ins_man

I did all of that. I now have a backup camera but no guide lines. I didn't see anything in settings to activate them.

Did you go through the entire hidden menu? There should be an option to turn on or off guidelines.

Sent from my SM-N920W8 using Tapatalk

ins_man · 11-02-2017, 09:46 PM

Yes. I found a setting that appears to turn on the lines and I also found some setting values to key in, but it still doesn't have lines. I'll keep playing with it.

jasjeet · 06-22-2018, 07:38 PM

Quote:

Originally Posted by l2iceman

Hey everyone, so I decided to finally try this today. And instructions on first page are accurate. Here are the photos I've taken showing the back of the connector, it counts from right to left, top to bottom. Plug 7 and 8 are the correct ones to connect to. Make sure the pins are pushed in all the way, I didn't and the video flickered, but now it's perfect. I just need a camera that doesn't have built in lines.

In the connector picture (sorry it's blurry), the two blank ones on the top roe between the red and black wires are pins 8 and 7.

I'm using a license plate camera I ordered off of eBay, it replaced the left license plate light.

Sent from my SM-N920W8 using Tapatalk

Where is the white plug in the first pic located?

l2iceman · 06-22-2018, 07:43 PM

It's from behind the oem radio I believe.

Sent from my SM-N920W8 using Tapatalk

jasjeet · 06-23-2018, 05:06 AM

Quote:

Originally Posted by l2iceman

It's from behind the oem radio I believe.

Sent from my SM-N920W8 using Tapatalk

Ouch so I have to dismantle the interior and run cables all the way to the boot?

l2iceman · 06-23-2018, 05:37 AM

Yepp lol it seems like alot of work but wasn't too bad.

Sent from my SM-N920W8 using Tapatalk

2string1 · 06-24-2020, 05:53 AM

Why do we need to buy a white plug? Don't you just plug the jumper in 7 & 8 pin into the existing plug in the back of the radio?

Spinja1991 · 04-20-2021, 02:27 PM

This may be a bit of a long shot, especially on such an old thread. But does anybody have any spare Schmartboard cables that have been suggested that I could purchase from you and have posted to the UK?

I really can't find an alternative, and the options I've tried really don't want to play ball.

Thanks!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY: Rearview Camera & DVD	Zyonara	DIY Section (Do-It-Yourself)	63	07-30-2013 07:10 PM
Rearview Camera for OEM 2010 Sat/Nav	40th370z	Nissan 370Z General Discussions	1	08-30-2012 11:43 AM
Rearview Camera Question	heebus	Nissan 370Z General Discussions	7	07-02-2012 04:51 PM
Review: bdl99 2010 Back-up Camera Install	N8GTOL	Audio & Video	3	11-21-2010 06:28 PM
Rearview Camera and DVD	Zyonara	Audio & Video	10	03-11-2010 12:22 AM

10-29-2017, 12:10 AM	#31 (permalink)
ins_man Base Member Join Date: Feb 2014 Location: Texas Posts: 6 Drives: 2010 370z Rep Power: 11	Thanks. I gave up after a few failed attempts and even put the whole dash back together. Today, I decided to try one more time. Worked like a charm. The only other question is ... does anyone know how to turn on the active guidelines within the factory Nav unit?

10-31-2017, 05:51 PM	#32 (permalink)
ins_man Base Member Join Date: Feb 2014 Location: Texas Posts: 6 Drives: 2010 370z Rep Power: 11	Bump... Does anyone know how to activate the backup camera guidelines on the OEM navigation unit?

11-02-2017, 12:59 AM	#34 (permalink)
ins_man Base Member Join Date: Feb 2014 Location: Texas Posts: 6 Drives: 2010 370z Rep Power: 11	I did all of that. I now have a back up camera but no guide lines.

11-02-2017, 01:03 AM	#35 (permalink)
ins_man Base Member Join Date: Feb 2014 Location: Texas Posts: 6 Drives: 2010 370z Rep Power: 11	I did all of that. I now have a backup camera but no guide lines. I didn't see anything in settings to activate them.

11-02-2017, 09:46 PM	#37 (permalink)
ins_man Base Member Join Date: Feb 2014 Location: Texas Posts: 6 Drives: 2010 370z Rep Power: 11	Yes. I found a setting that appears to turn on the lines and I also found some setting values to key in, but it still doesn't have lines. I'll keep playing with it.

06-22-2018, 07:43 PM	#39 (permalink)
l2iceman Base Member Join Date: Oct 2014 Location: Toronto, Canada Posts: 126 Drives: '10 370z Rep Power: 240	It's from behind the oem radio I believe. Sent from my SM-N920W8 using Tapatalk

06-23-2018, 05:37 AM	#41 (permalink)
l2iceman Base Member Join Date: Oct 2014 Location: Toronto, Canada Posts: 126 Drives: '10 370z Rep Power: 240	Yepp lol it seems like alot of work but wasn't too bad. Sent from my SM-N920W8 using Tapatalk

06-24-2020, 05:53 AM	#42 (permalink)
2string1 Enthusiast Member Join Date: May 2020 Location: Vermont Posts: 356 Drives: 2010 Roadster Rep Power: 15459	Why do we need to buy a white plug? Don't you just plug the jumper in 7 & 8 pin into the existing plug in the back of the radio?

04-20-2021, 02:27 PM	#43 (permalink)
Spinja1991 Base Member Join Date: Aug 2017 Location: UK Posts: 1 Drives: '11 Nissan 370z Rep Power: 8	This may be a bit of a long shot, especially on such an old thread. But does anybody have any spare Schmartboard cables that have been suggested that I could purchase from you and have posted to the UK? I really can't find an alternative, and the options I've tried really don't want to play ball. Thanks!