Front lip install DIY??

LostSol · 03-18-2013, 04:10 PM

I've searched my *** off and can't find a DIY for installing a front lip. My seibon CF lip came in today and I'm excited to get it on! Any help would be appreciated!

enkei2k · 03-18-2013, 05:14 PM

Search harder

DIY: STILLEN 370Z Front Splitter Install

Front lip install help

JP Vizage Front Lip Installed

Seibon Front Lip SR-Style

concept is the same for all lips.

LostSol · 03-18-2013, 05:40 PM

The first link is useless to me, my lip is completely different than the stillen lip.

The second and fourth links are a few posts talking about how to do it, but nothing substantial.

The third link was ok, but again my lip is quite different than that one.

But thanks anyways.

NitrousZ34 · 03-19-2013, 03:44 AM

It should just be like clip on clip off. What lip do you have?

LostSol · 03-19-2013, 09:41 AM

Seibon SR lip, its all good im just gonna take it to a shop so I dont screw it up.

Pintsize725 · 03-19-2013, 11:40 AM

Screw it, I tried finding it via search but I can't. Anyone have an EVO-R lip DIY?

NitrousZ34 · 03-20-2013, 05:20 AM

Nice lip! GL and post pictures after its done

FairladyZ · 03-20-2013, 05:31 AM

Evo r is self explanatory no joke

Pintsize725 · 03-20-2013, 11:04 AM

Quote:

Originally Posted by FairladyZ

Evo r is self explanatory no joke

So the provided screws are enough support? Or am I going to run into a screw swap ala the side blades?

LostSol · 03-22-2013, 06:05 PM

Got my lip installed yesterday, shop did a killer job, they used screws and some of the stock screws/bolts. Seems to be held on pretty well.

Dallaz · 04-07-2013, 09:37 PM

Looks great. I believe my lip is the exact same.... Sunline replica?

It's a very simple install but you need to take your bumper off for best results, and what I mean by that is the lip will flex a little but if you try to "wrap" it around your bumper while its on the car you may crack it when installing, you can't just slide it up from underneath either, won't work if you may have thought that. If you remove your front bumper which only takes a matter of minutes, you then can flex the bumper a little and put the lip on easily without flexing the lip and risk damaging it. Then screw a couple bolts on each side in your fender liner area of you bumper and that's enough to hold it.

I never used any adhesion material on mine, trust me with this lip it's snugg, when its on, IT'S ON!!

The only reason to try and use any adhesion goodies would be if there's not perfect fitment (gaps) that you want to close by using something to hold the lip to your bumper.

This should help some of you guys, I highly suggest doing this yourself. Much more rewarding and you don't have to spend any $$$ on install

LostSol · 04-08-2013, 08:17 AM

^ Thanks man, yeah its a sunline rep made by seibon. I had my shop throw it on for me, didnt cost much and gave me peace of mind that it was on securely. They also didnt use any adhesives but offered to use some black silicone to fill the small gaps in fitment. I had them hold off since I'm waiting to get my CF fang covers in, then we will see how much modification I have to make to the lip to get it to fit, Im hoping its just a little grinding.

Dallaz · 04-08-2013, 01:01 PM

I have the fang cover and the lip and it fits perfect, almost like if I didn't have the fang cover there would be a gap it works really well together, but I suppose it varies from lip to lip with these replicas.

LostSol · 04-08-2013, 01:17 PM

Yeah thers about a 1/8" gap through most of the lip that would touch the fang cover, but in the corners it actually fills the gap, so ill just probably have to grind the corners a bit. Ive never worked wit CF like that before so I hope I dont screw it up!

axmea? · 04-10-2013, 01:21 AM

I love this lip. I will be making a 16 gauge skid plate for mine this weekend. Car sits aggressively low and to extend the life of the lip, my answer are these skid plates.

03-18-2013, 04:10 PM	#1 (permalink)
LostSol Premium Member Join Date: Jan 2013 Location: Orlando Posts: 1,021 Drives: 2010 370z 40th A.E. Rep Power: 15	Front lip install DIY?? I've searched my * off and can't find a DIY for installing a front lip. My seibon CF lip came in today and I'm excited to get it on! Any help would be appreciated! __________________ 2010 Nissan 370Z 40th Anniversary Edition #762/1000** \| Forgestar \| Michelin \| Swift \| TRS \| Z Speed \| ARK \| Z1 \| Hawk \| CFE \| Evo-R \| GTMat \| Stillen \| Seibon \| Whiteline \| Pioneer \|

03-18-2013, 05:14 PM	#2 (permalink)
enkei2k A True Z Fanatic Join Date: Apr 2011 Location: NYC Posts: 6,365 Drives: '12 G41 B/S M6 Rep Power: 3716	Search harder DIY: STILLEN 370Z Front Splitter Install Front lip install help JP Vizage Front Lip Installed Seibon Front Lip SR-Style concept is the same for all lips. __________________ ...need boost...

03-18-2013, 05:40 PM	#3 (permalink)
LostSol Premium Member Join Date: Jan 2013 Location: Orlando Posts: 1,021 Drives: 2010 370z 40th A.E. Rep Power: 15	The first link is useless to me, my lip is completely different than the stillen lip. The second and fourth links are a few posts talking about how to do it, but nothing substantial. The third link was ok, but again my lip is quite different than that one. But thanks anyways. __________________ 2010 Nissan 370Z 40th Anniversary Edition #762/1000 \| Forgestar \| Michelin \| Swift \| TRS \| Z Speed \| ARK \| Z1 \| Hawk \| CFE \| Evo-R \| GTMat \| Stillen \| Seibon \| Whiteline \| Pioneer \|

03-19-2013, 09:41 AM	#5 (permalink)
LostSol Premium Member Join Date: Jan 2013 Location: Orlando Posts: 1,021 Drives: 2010 370z 40th A.E. Rep Power: 15	Seibon SR lip, its all good im just gonna take it to a shop so I dont screw it up. __________________ 2010 Nissan 370Z 40th Anniversary Edition #762/1000 \| Forgestar \| Michelin \| Swift \| TRS \| Z Speed \| ARK \| Z1 \| Hawk \| CFE \| Evo-R \| GTMat \| Stillen \| Seibon \| Whiteline \| Pioneer \|

03-19-2013, 11:40 AM	#6 (permalink)
Pintsize725 A True Z Fanatic Join Date: Jan 2012 Location: Austin Posts: 14,196 Drives: 2016 Mazda 6 Rep Power: 211844	Screw it, I tried finding it via search but I can't. Anyone have an EVO-R lip DIY? __________________ Tracie

03-19-2013, 03:44 AM	#4 (permalink)
NitrousZ34 Banned Join Date: Apr 2012 Location: Canoga Posts: 505 Drives: Myself crazy Rep Power: 0	It should just be like clip on clip off. What lip do you have?

03-20-2013, 05:20 AM	#7 (permalink)
NitrousZ34 Banned Join Date: Apr 2012 Location: Canoga Posts: 505 Drives: Myself crazy Rep Power: 0	Nice lip! GL and post pictures after its done

03-20-2013, 05:31 AM	#8 (permalink)
FairladyZ Track Member Join Date: Jan 2009 Location: Los Angeles Posts: 850 Drives: 2012 370Z TRNG SPRT Rep Power: 17	Evo r is self explanatory no joke

04-07-2013, 09:37 PM	#11 (permalink)
Dallaz A True Z Fanatic Join Date: Jun 2011 Location: North Dallas Posts: 1,272 Drives: 09MontereyBlu370z6MT Rep Power: 16	Looks great. I believe my lip is the exact same.... Sunline replica? It's a very simple install but you need to take your bumper off for best results, and what I mean by that is the lip will flex a little but if you try to "wrap" it around your bumper while its on the car you may crack it when installing, you can't just slide it up from underneath either, won't work if you may have thought that. If you remove your front bumper which only takes a matter of minutes, you then can flex the bumper a little and put the lip on easily without flexing the lip and risk damaging it. Then screw a couple bolts on each side in your fender liner area of you bumper and that's enough to hold it. I never used any adhesion material on mine, trust me with this lip it's snugg, when its on, IT'S ON!! The only reason to try and use any adhesion goodies would be if there's not perfect fitment (gaps) that you want to close by using something to hold the lip to your bumper. This should help some of you guys, I highly suggest doing this yourself. Much more rewarding and you don't have to spend any $$$ on install __________________ AeroJacket Lip Kit \| GTR switch \| NISMO S-Knob \| Blacked-Out-EVERYTHING\| 5% Tint \| Carbon Fangs/Upper Trim \| VOSSEN CV3's \| Painted Headlights \| CF Diffuser

04-08-2013, 08:17 AM	#12 (permalink)
LostSol Premium Member Join Date: Jan 2013 Location: Orlando Posts: 1,021 Drives: 2010 370z 40th A.E. Rep Power: 15	^ Thanks man, yeah its a sunline rep made by seibon. I had my shop throw it on for me, didnt cost much and gave me peace of mind that it was on securely. They also didnt use any adhesives but offered to use some black silicone to fill the small gaps in fitment. I had them hold off since I'm waiting to get my CF fang covers in, then we will see how much modification I have to make to the lip to get it to fit, Im hoping its just a little grinding. __________________ 2010 Nissan 370Z 40th Anniversary Edition #762/1000 \| Forgestar \| Michelin \| Swift \| TRS \| Z Speed \| ARK \| Z1 \| Hawk \| CFE \| Evo-R \| GTMat \| Stillen \| Seibon \| Whiteline \| Pioneer \|

04-08-2013, 01:01 PM	#13 (permalink)
Dallaz A True Z Fanatic Join Date: Jun 2011 Location: North Dallas Posts: 1,272 Drives: 09MontereyBlu370z6MT Rep Power: 16	I have the fang cover and the lip and it fits perfect, almost like if I didn't have the fang cover there would be a gap it works really well together, but I suppose it varies from lip to lip with these replicas. __________________ AeroJacket Lip Kit \| GTR switch \| NISMO S-Knob \| Blacked-Out-EVERYTHING\| 5% Tint \| Carbon Fangs/Upper Trim \| VOSSEN CV3's \| Painted Headlights \| CF Diffuser

04-08-2013, 01:17 PM	#14 (permalink)
LostSol Premium Member Join Date: Jan 2013 Location: Orlando Posts: 1,021 Drives: 2010 370z 40th A.E. Rep Power: 15	Yeah thers about a 1/8" gap through most of the lip that would touch the fang cover, but in the corners it actually fills the gap, so ill just probably have to grind the corners a bit. Ive never worked wit CF like that before so I hope I dont screw it up! __________________ 2010 Nissan 370Z 40th Anniversary Edition #762/1000 \| Forgestar \| Michelin \| Swift \| TRS \| Z Speed \| ARK \| Z1 \| Hawk \| CFE \| Evo-R \| GTMat \| Stillen \| Seibon \| Whiteline \| Pioneer \|

04-10-2013, 01:21 AM	#15 (permalink)
axmea? A True Z Fanatic Join Date: Apr 2012 Location: SoCal Posts: 6,236 Drives: WELL ZED PW 6MT Rep Power: 53241	I love this lip. I will be making a 16 gauge skid plate for mine this weekend. Car sits aggressively low and to extend the life of the lip, my answer are these skid plates. __________________ >MyZ's Album< NISMO Convert/ECUTEK/Takeda CAI/F.I. HFC NR CB Carbon/F.I. 34 Row Oil Cooler/4.08 Final Drive /Powertrix+Swifts/Hotchkis/SPL/Whiteline/TWM/Zoom Engineering/EVO-R/AeroJacket Vented CF Fenders + CF Spoiler/Avant Garde-WORK/NST/Morimoto Halo/STi Clear Lenses/Carbon Signal Automotive/RJM Performance/ZSpeed Clutch Flywheel CSC delete

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY: STILLEN 370Z Front Splitter Install	TypeOne	DIY Section (Do-It-Yourself)	37	01-25-2014 04:37 PM
Front lip install help	brianryan8	Exterior & Interior	3	05-30-2012 11:41 AM
Is there a DIY for front SPC Camber arms install?	TMAN1985	Brakes & Suspension	9	02-27-2012 05:23 AM
Front bumper foglight install	MY1STZ	Exterior & Interior	3	09-12-2010 10:02 AM