What I did to fix my steering lock failure...

Sh0velMan · 02-24-2013, 08:17 PM

Check it out. Not quite done, but the basics are there.

If you want more info on it, shoot me a PM.

SPOHN · 02-24-2013, 08:32 PM

So what does that box do?

SouthArk370Z · 02-24-2013, 08:33 PM

Sub'd. Waiting with bated breath for more details.

Sh0velMan · 02-24-2013, 08:33 PM

Quote:

Originally Posted by SPOHN

So what does that box do?

Replaces the unit, gives you a kill switch to enable/disable ignition lockout.

And drops nearly 2 pounds off the front of the car.

SPOHN · 02-24-2013, 08:35 PM

I have the fuse pulled but still liked to get rid of the unit.

SouthArk370Z · 02-24-2013, 08:36 PM

Quote:

Originally Posted by Sh0velMan

Replaces the unit, gives you a kill switch to enable/disable ignition lockout.

And drops nearly 2 pounds off the front of the car.

Did you transplant the electronics or just fake the uswitches?

Sh0velMan · 02-24-2013, 08:39 PM

Quote:

Originally Posted by SouthArk370Z

Did you transplant the electronics or just fake the uswitches?

Electronics are transplanted and modified a fair bit.

No microswitches remain to haunt you... no mechanical bits to fail leaving you stranded.

OldGuy · 02-24-2013, 08:42 PM

Way too much for a mechanical illiterate like me. I say, "Just pull the fuse!"

Sh0velMan · 02-24-2013, 08:45 PM

Quote:

Originally Posted by OldGuy

Way too much for a mechanical illiterate like me. I say, "Just pull the fuse!"

If your unit fails before you pull the fuse, you're boned.

You have a few choices:

1) Buy a $550 unit and pay someone to install it if you're not mechanically inclined.

2) Hack apart your existing unit, twist the mechanical bits around until it works, seal it back up somehow after pulling the fuse and hope it never rattles loose again.

3) Talk to me.

Edit:

And GOD FORBID some tech at some auto repair/service center sees a missing fuse and decides to put one in for you to do you a big favor and BOOM, interlock engages and you're boned.

With this method, that isn't possible, and it's actually MORE secure (theft wise) than leaving the unit in place with the fuse pulled.

SouthArk370Z · 02-24-2013, 08:46 PM

Quote:

Originally Posted by Sh0velMan

Electronics are transplanted and modified a fair bit.

Will you be posting more details and pictures? I have pulled the fuse on mine but am still be very interested in how you did it.

Quote:

Originally Posted by Sh0velMan

No microswitches remain to haunt you... no mechanical bits to fail leaving you stranded.

"Emulate" may have been a better word to use than "fake". I was assuming, if you went to as much effort as it appears to be (the outside looks very professional and you did a neat job of cannibalizing the connector

), that you would have eliminated the physical switches.

OldGuy · 02-24-2013, 08:55 PM

Quote:

Originally Posted by Sh0velMan

If your unit fails before you pull the fuse, you're boned.

You have a few choices:

1) Buy a $550 unit and pay someone to install it if you're not mechanically inclined.

2) Hack apart your existing unit, twist the mechanical bits around until it works, seal it back up somehow after pulling the fuse and hope it never rattles loose again.

3) Talk to me.

Edit:

And GOD FORBID some tech at some auto repair/service center sees a missing fuse and decides to put one in for you to do you a big favor and BOOM, interlock engages and you're boned.

With this method, that isn't possible, and it's actually MORE secure (theft wise) than leaving the unit in place with the fuse pulled.

Pulled my use after reading the early/warning posts long ago. Just saying that I find the pre-emptive fuse pull a lot easier and more appropriate than your approach for a mechanical imcompetant like me.

Baer383 · 02-24-2013, 08:56 PM

Nobody is going to replace the fuse in the IPDM just to be a nice nice guy,they can't even find it.

Sh0velMan · 02-24-2013, 08:59 PM

Quote:

Originally Posted by Baer383

Nobody is going to replace the fuse in the IPDM just to be a nice nice guy,they can't even find it.

LOL.

Took me a while to find it, actually.

DLSTR · 02-25-2013, 01:03 AM

Nissan removed the system completely. The last thing Im doing is putting it back. The 2lbs matter about ZERO. You will not go faster or brake better.
If you have pulled the fuse/installed the bypass etc why on earth do you really need it back in. Your insurance company will not care nor should you.
I have insurance. If my car gets stolen. Whatever. I will get another one. That car, assuming I buy a current model will not have a steering lock and I damn sure wont be adding it.

SouthArk370Z · 02-25-2013, 06:39 AM

Quote:

Originally Posted by DLSTR

Nissan removed the system completely. The last thing Im doing is putting it back. The 2lbs matter about ZERO. You will not go faster or brake better.
If you have pulled the fuse/installed the bypass etc why on earth do you really need it back in. Your insurance company will not care nor should you.
I have insurance. If my car gets stolen. Whatever. I will get another one. That car, assuming I buy a current model will not have a steering lock and I damn sure wont be adding it.

While this is not the method I would use (I pulled the fuse), I think it is nice to have another alternative.

I interpreted the "two pounds" comment as being hyperbolic salesmanship. Two pounds, by itself, isn't going to do much for performance or economy (extremely close to the zero you quote), but it is two less pounds to tote around. A few pounds here and a few pounds there add up after awhile. I'd use the same pitch if I were in the OPs position.

I'm not so sure that some insurance company wouldn't say that since you defeated a factory security feature, it's your fault that the car was stolen. Maybe not. Since I've pulled my fuse, it's pretty obvious I'm not worried about it.

02-24-2013, 08:32 PM	#2 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 45 Posts: 14,844 Drives: Waiting on next Z Rep Power: 221	So what does that box do? __________________

02-24-2013, 08:33 PM	#3 (permalink)
SouthArk370Z Premium Member Join Date: Nov 2010 Location: South Arkansas Posts: 8,435 Drives: 2014 Challenger Rep Power: 324198	Sub'd. Waiting with bated breath for more details. __________________ Steering Lock Links - Search The370Z Bookmarklet - FSM @ NICOclub Mankind has progressed past the need for war but we haven't evolved that far. - NachoMahma

02-24-2013, 08:35 PM	#5 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 45 Posts: 14,844 Drives: Waiting on next Z Rep Power: 221	I have the fuse pulled but still liked to get rid of the unit. __________________

02-24-2013, 08:42 PM	#8 (permalink)
OldGuy Base Member Join Date: Dec 2009 Location: Greensburg PA Posts: 899 Drives: '09370Z Red Base A7 Rep Power: 16	Way too much for a mechanical illiterate like me. I say, "Just pull the fuse!" Baer383 likes this.

02-24-2013, 08:56 PM	#12 (permalink)
Baer383 A True Z Fanatic Join Date: Aug 2010 Location: Lawrenceville,Ga Posts: 4,293 Drives: My foot up your azz Rep Power: 30	Nobody is going to replace the fuse in the IPDM just to be a nice nice guy,they can't even find it. Sh0velMan likes this. __________________ 2013 ZL1 754 rwhp 747 rwtq

02-25-2013, 01:03 AM	#14 (permalink)
DLSTR A True Z Fanatic Join Date: May 2011 Location: Süd Germany Posts: 2,462 Drives: 21Supra 2.0/22 M240i Rep Power: 21267	Nissan removed the system completely. The last thing Im doing is putting it back. The 2lbs matter about ZERO. You will not go faster or brake better. If you have pulled the fuse/installed the bypass etc why on earth do you really need it back in. Your insurance company will not care nor should you. I have insurance. If my car gets stolen. Whatever. I will get another one. That car, assuming I buy a current model will not have a steering lock and I damn sure wont be adding it. tjlazer and DEpointfive0 like this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Steering lock failure	Terrace	Canada	52	06-16-2013 10:32 PM
LMAO'd at the Audi dealershit (370Z steering lock failure)	DEpointfive0	Nissan 370Z General Discussions	17	02-18-2013 05:28 PM
manufacture date ranges for steering lock failure?	ssmoked	Nissan 370Z General Discussions	17	02-14-2013 01:02 PM
Those of you who have had Steering Lock Failure	Thechidz	Nissan 370Z General Discussions	449	01-12-2013 06:05 PM
Steering wheel lock failure 2010 Nismo	Sidz	Exterior & Interior	10	01-07-2013 05:43 PM