Osiris Pro Tuner Walkthrough

Fearless_Z · 01-31-2013, 03:59 AM

I've went looking for information on this before posting but couldnt find anything solid.

I recently purchased the Osiris Tuner (Pro Version), when I probably didnt need it. But I was curious about a few things that I can't figure out.

1. How do I apply the liscense so I can use/flash my ECU?
2. How do I send the right schematics to UpRev through the eTunes service they provide?

Im a newbie when it comes to tuning and the software.

Any help or suggestions would be greatly appreciated. Thanks!

Megan370z · 01-31-2013, 05:27 AM

Quote:

Originally Posted by Fearless_Z

I've went looking for information on this before posting but couldnt find anything solid.

I recently purchased the Osiris Tuner (Pro Version), when I probably didnt need it. But I was curious about a few things that I can't figure out.

1. How do I apply the liscense so I can use/flash my ECU?
2. How do I send the right schematics to UpRev through the eTunes service they provide?

Im a newbie when it comes to tuning and the software.

Any help or suggestions would be greatly appreciated. Thanks!

I really doubt you got a Pro Cable but only the Tuner version.

gomer_110 · 01-31-2013, 07:07 AM

Quote:

Originally Posted by Megan370z

I really doubt you got a Pro Cable but only the Tuner version.

@ OP:

Have you looked at the manual for Osiris yet? I got the tuner edition about a month ago and by just following the manual was able to flash the license onto the ECU without a problem. Also if you don't have the proper ROM file based on your ECU part number you'll need that before you start.

Fearless_Z · 01-31-2013, 02:52 PM

Quote:

Originally Posted by Megan370z

I really doubt you got a Pro Cable but only the Tuner version.

Well that's what I ordered from Z1 Motorsports for $700. All I got was the cable in the bag. Was I suppose to get anything else?

Fearless_Z · 01-31-2013, 02:53 PM

Quote:

Originally Posted by gomer_110

@ OP:

Have you looked at the manual for Osiris yet? I got the tuner edition about a month ago and by just following the manual was able to flash the license onto the ECU without a problem. Also if you don't have the proper ROM file based on your ECU part number you'll need that before you start.

I'll give it a look see!

gomer_110 · 01-31-2013, 02:58 PM

Quote:

Originally Posted by Fearless_Z

Well that's what I ordered from Z1 Motorsports for $700. All I got was the cable in the bag. Was I suppose to get anything else?

You order the Tuner edition for that price NOT the Pro edition. And to answer your question all you get is the cable. The software has to be downloaded from Uprev's website. You can find the manual there too.

Fearless_Z · 01-31-2013, 03:08 PM

I suppose I got the the "Tuner" edition mixed up with the "Pro" term.

The last thing I have a question about. To flash my ECU I have to have a ROM loaded. Since I have the Tuner version, I have to develop my own right?

gomer_110 · 01-31-2013, 03:12 PM

Quote:

Originally Posted by Fearless_Z

I suppose I got the the "Tuner" edition mixed up with the "Pro" term.

The last thing I have a question about. To flash my ECU I have to have a ROM loaded. Since I have the Tuner version, I have to develop my own right?

No. Following the steps in the manual after you connect the cable the ECU part number is displayed on the screen. Contact Uprev (I did it via email) with the ECU part number and they will send you the correct ROM file for the ECU. The ROM file they send you is essentially just the stock ECU parameters that you or a tuner can then adjust as needed.

And if all else fails READ THE MANUAL!!!

seymore4 · 01-31-2013, 03:13 PM

Quote:

Originally Posted by Fearless_Z

I suppose I got the the "Tuner" edition mixed up with the "Pro" term.?

The Protuner version is for authorized shops who have a dyno and had uprev's training, the tuner version is the one thats for sale to the public.

Quote:

Originally Posted by Fearless_Z

To flash my ECU I have to have a ROM loaded. Since I have the Tuner version, I have to develop my own right?

Download the software "Osiris installer" from UpRev - Engine Management under the support page, it will download Osiris, cipher, the rom editor, as well as the user guides.

Read the user guides and you should get a pretty good idea what to do. Email the guys who sold you the cable for the correct rom files once you've got it hooked up.

On a side note I'm really tired of shops selling this stuff without at least pointing customers in the right direction... you spent $700 with them, a simple email with some instructions would go a long ways.

gomer_110 · 01-31-2013, 03:22 PM

Quote:

Originally Posted by seymore4

( Click to show/hide )

On a side note I'm really tired of shops selling this stuff without at least pointing customers in the right direction... you spent $700 with them, a simple email with some instructions would go a long ways.

While I agree with this to a point, if a person is going to spend their hard earned money on a DIY type product like this don't you think a little research is in order?

Megan370z · 01-31-2013, 03:45 PM

Quote:

Originally Posted by gomer_110

While I agree with this to a point, if a person is going to spend their hard earned money on a DIY type product like this don't you think a little research is in order?

totaly agree with this.

as far as making sure if you did got the PRO version look into the cable manager and if it look like mine then you are a lucky one ,
getting the Pro version cable require mostly to have a shop and being trainned or an extensive needs for it, since it give some feature that shouldnt be given to the general public.

Fearless_Z · 01-31-2013, 06:16 PM

Quote:

Originally Posted by seymore4

On a side note I'm really tired of shops selling this stuff without at least pointing customers in the right direction... you spent $700 with them, a simple email with some instructions would go a long ways.

I agree, i researched and downloaded the software and manuals. The only thing i was confused about was uploading a ROM file because I had none. I just didnt know that they had to email me that as well. Simple misguidance.

01-31-2013, 03:59 AM	#1 (permalink)
Fearless_Z Base Member Join Date: Sep 2012 Location: Center Point, LA Posts: 208 Drives: 2014 Nissan Z Nismo Rep Power: 13	Osiris Pro Tuner Walkthrough I've went looking for information on this before posting but couldnt find anything solid. I recently purchased the Osiris Tuner (Pro Version), when I probably didnt need it. But I was curious about a few things that I can't figure out. 1. How do I apply the liscense so I can use/flash my ECU? 2. How do I send the right schematics to UpRev through the eTunes service they provide? Im a newbie when it comes to tuning and the software. Any help or suggestions would be greatly appreciated. Thanks!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] Osiris tuner	cubbies1031	Parts for sale (Private Classifieds)	24	05-18-2013 05:41 AM
[FOR SALE] RS1 Fenders/Osiris Pro Tuner	Fearless_Z	Parts for sale (Private Classifieds)	11	01-26-2013 03:12 AM
FREE SHIPPING on UpRev Cipher Cables, Osiris Standard, Osiris Tuner & GT MAF's!	R/T Tuning	Drivetrain/Engine	0	01-16-2013 11:28 AM
[FOR SALE] Osiris Tuner version, new	Bigjoe	Parts for sale (Private Classifieds)	31	03-23-2012 02:35 PM

01-31-2013, 03:08 PM	#7 (permalink)
Fearless_Z Base Member Join Date: Sep 2012 Location: Center Point, LA Posts: 208 Drives: 2014 Nissan Z Nismo Rep Power: 13	I suppose I got the the "Tuner" edition mixed up with the "Pro" term. The last thing I have a question about. To flash my ECU I have to have a ROM loaded. Since I have the Tuner version, I have to develop my own right?