![]() |
My lock failed over the weekend and taking a hammer to the mechanism did not disengage the lock. I removed the steering lock mechanism, reattached the harness to the mechanism
|
|
LinkBack | Thread Tools | Display Modes |
![]() |
#24 (permalink) |
Base Member
Join Date: Jan 2012
Location: Whittier
Posts: 33
Drives: 2010 370Z Roadster
Rep Power: 14 ![]() |
![]()
My lock failed over the weekend and taking a hammer to the mechanism did not disengage the lock. I removed the steering lock mechanism, reattached the harness to the mechanism and had my father in law hold the mechanism and press the movable part from the top, down with a screwdriver. I then pressed the start button, the radio turned on and ACC was displayed on the start button. I immediately removed the steering lock fuse from the the compartment within the battery area then started the car. Thankfully this worked for me. The car starts and I'm confident that I will not have to deal with this again........
If your steering lock mechanism's top part can be pushed down, this disengages the steering lock and give's you the opportunity to remove the fuse. Don't forget to attach the wire harness when doing this and this is a 2 person job. Good Luck! |
![]() |
![]() |
Bookmarks |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Steering Wheel Lock? | Parkerman | Exterior & Interior | 41 | 04-25-2016 04:36 PM |
Steering lock failure | Terrace | Canada | 52 | 06-16-2013 09:32 PM |
Do I have the steering lock fuse? I don't want it | R0bDC | Engine & Drivetrain | 5 | 01-03-2013 07:14 PM |
Need a steering lock assembly!! | bfowlzr33 | Wanted | 8 | 01-02-2013 04:40 PM |
Steering Lock Elimination | Vince | Exterior & Interior | 38 | 05-18-2012 10:43 AM |