fog light HELP
 

Today in trying to install my new EVO-R foglight and durring the install one of the #10 nuts on the stack light just keeps on spinning like the stud broke free and not letting the nut come off I do know there is alot of locktight on the nuts how am I suppsoed to break the nut free??

I completely broke off the lens and drilled to get to the head the of the bolt , And used needle nose plies to hold the head of the bolt

https://lh3.googleusercontent.com/-j...0/DSCF0332.JPG

https://lh4.googleusercontent.com/-Q...0/DSCF0333.JPG

And this did not damage the bumper at all?

Just hold the dummy light while working on it since the diffusers kinda flimsy

ok thanks ill give it a shot..

another question do i use the black plastic bracket with the new light or do i just put the light ino the bumper??

If you're replacing it with the nissan actual fog light? then yes.

I'm not sure on the EVOR version

A Notice to all: This type of removal is only in the event the prior attempt of heating the nuts trying to melt some of the locktite to loosen the nut FAILS. :(

I recommend to try this first prior to basically destroying the lense

ok

I had to do the same thing, but I had a lot more plastic shavings, lol, SUCH a BÍTCH... I cursed every family member of the guy at Nissan who decided to put so much thread locker on those fúcking things...

I still hope he/she dies... Along with the person who decided, oh, lets run the wiring, but you can't use it...

:iagree::iagree:

does anyone know if i need to use the black part off of the stock light to in stall the EVO-Rb light or do i just put the new light in????

Looking at the DiY? there are no mounting bolts

I think its just stuck on?

http://www.the370z.com/diy-section-d...t-install.html

I'd use the back part just as a just in case...

I put the black back price back in, just to have it there and to protect the wiring.

Yeahhhhhh... I remember saying its really easy to steal, I think it is just double sided taped on there