fog light HELP

Wonka2581 · 12-30-2012, 02:48 PM

Today in trying to install my new EVO-R foglight and durring the install one of the #10 nuts on the stack light just keeps on spinning like the stud broke free and not letting the nut come off I do know there is alot of locktight on the nuts how am I suppsoed to break the nut free??

Trips · 12-30-2012, 02:58 PM

I completely broke off the lens and drilled to get to the head the of the bolt , And used needle nose plies to hold the head of the bolt

Wonka2581 · 12-30-2012, 02:59 PM

And this did not damage the bumper at all?

Trips · 12-30-2012, 03:02 PM

Just hold the dummy light while working on it since the diffusers kinda flimsy

Wonka2581 · 12-30-2012, 03:04 PM

ok thanks ill give it a shot..

Wonka2581 · 12-30-2012, 03:20 PM

another question do i use the black plastic bracket with the new light or do i just put the light ino the bumper??

Trips · 12-30-2012, 03:26 PM

If you're replacing it with the nissan actual fog light? then yes.

I'm not sure on the EVOR version

A Notice to all: This type of removal is only in the event the prior attempt of heating the nuts trying to melt some of the locktite to loosen the nut FAILS.

I recommend to try this first prior to basically destroying the lense

Wonka2581 · 12-30-2012, 03:30 PM

ok

DEpointfive0 · 12-30-2012, 03:36 PM

Quote:

Originally Posted by Triple's

I completely broke off the lens and drilled to get to the head the of the bolt , And used needle nose plies to hold the head of the bolt

I had to do the same thing, but I had a lot more plastic shavings, lol, SUCH a BÍTCH... I cursed every family member of the guy at Nissan who decided to put so much thread locker on those fúcking things...

I still hope he/she dies... Along with the person who decided, oh, lets run the wiring, but you can't use it...

Wonka2581 · 12-30-2012, 03:41 PM

Quote:

Originally Posted by DEpointfive0

I had to do the same thing, but I had a lot more plastic shavings, lol, SUCH a BÍTCH... I cursed every family member of the guy at Nissan who decided to put so much thread locker on those fúcking things...

I still hope he/she dies... Along with the person who decided, oh, lets run the wiring, but you can't use it...

Wonka2581 · 12-30-2012, 03:45 PM

does anyone know if i need to use the black part off of the stock light to in stall the EVO-Rb light or do i just put the new light in????

Trips · 12-30-2012, 03:49 PM

Looking at the DiY? there are no mounting bolts

I think its just stuck on?

DIY: EVO-R Foglight Install

DEpointfive0 · 12-30-2012, 03:49 PM

Quote:

Originally Posted by Wonka2581

does anyone know if i need to use the black part off of the stock light to in stall the EVO-Rb light or do i just put the new light in????

I'd use the back part just as a just in case...

grant · 12-30-2012, 05:16 PM

I put the black back price back in, just to have it there and to protect the wiring.

DEpointfive0 · 12-30-2012, 05:20 PM

Quote:

Originally Posted by Triple's

Looking at the DiY? there are no mounting bolts

I think its just stuck on?

DIY: EVO-R Foglight Install

Yeahhhhhh... I remember saying its really easy to steal, I think it is just double sided taped on there

12-30-2012, 02:48 PM	#1 (permalink)
Wonka2581 A True Z Fanatic Join Date: Nov 2012 Location: Chattanooga, TN Posts: 3,083 Drives: MY WIFE CRAZY.... Rep Power: 2612	fog light HELP Today in trying to install my new EVO-R foglight and durring the install one of the #10 nuts on the stack light just keeps on spinning like the stud broke free and not letting the nut come off I do know there is alot of locktight on the nuts how am I suppsoed to break the nut free??

12-30-2012, 02:58 PM	#2 (permalink)
Trips Administrator Join Date: May 2009 Location: Disneyland, Ca Posts: 8,732 Drives: 🔰 Rep Power: 10	I completely broke off the lens and drilled to get to the head the of the bolt , And used needle nose plies to hold the head of the bolt __________________

12-30-2012, 03:02 PM	#4 (permalink)
Trips Administrator Join Date: May 2009 Location: Disneyland, Ca Posts: 8,732 Drives: 🔰 Rep Power: 10	Just hold the dummy light while working on it since the diffusers kinda flimsy __________________

12-30-2012, 03:26 PM	#7 (permalink)
Trips Administrator Join Date: May 2009 Location: Disneyland, Ca Posts: 8,732 Drives: 🔰 Rep Power: 10	If you're replacing it with the nissan actual fog light? then yes. I'm not sure on the EVOR version A Notice to all: This type of removal is only in the event the prior attempt of heating the nuts trying to melt some of the locktite to loosen the nut FAILS. I recommend to try this first prior to basically destroying the lense DEpointfive0 likes this. __________________ Last edited by Trips; 12-30-2012 at 03:38 PM.

12-30-2012, 03:49 PM	#12 (permalink)
Trips Administrator Join Date: May 2009 Location: Disneyland, Ca Posts: 8,732 Drives: 🔰 Rep Power: 10	Looking at the DiY? there are no mounting bolts I think its just stuck on? DIY: EVO-R Foglight Install __________________

12-30-2012, 02:59 PM	#3 (permalink)
Wonka2581 A True Z Fanatic Join Date: Nov 2012 Location: Chattanooga, TN Posts: 3,083 Drives: MY WIFE CRAZY.... Rep Power: 2612	And this did not damage the bumper at all?

12-30-2012, 03:04 PM	#5 (permalink)
Wonka2581 A True Z Fanatic Join Date: Nov 2012 Location: Chattanooga, TN Posts: 3,083 Drives: MY WIFE CRAZY.... Rep Power: 2612	ok thanks ill give it a shot..

12-30-2012, 03:20 PM	#6 (permalink)
Wonka2581 A True Z Fanatic Join Date: Nov 2012 Location: Chattanooga, TN Posts: 3,083 Drives: MY WIFE CRAZY.... Rep Power: 2612	another question do i use the black plastic bracket with the new light or do i just put the light ino the bumper??

12-30-2012, 03:30 PM	#8 (permalink)
Wonka2581 A True Z Fanatic Join Date: Nov 2012 Location: Chattanooga, TN Posts: 3,083 Drives: MY WIFE CRAZY.... Rep Power: 2612	ok

12-30-2012, 03:45 PM	#11 (permalink)
Wonka2581 A True Z Fanatic Join Date: Nov 2012 Location: Chattanooga, TN Posts: 3,083 Drives: MY WIFE CRAZY.... Rep Power: 2612	does anyone know if i need to use the black part off of the stock light to in stall the EVO-Rb light or do i just put the new light in????

12-30-2012, 05:16 PM	#14 (permalink)
grant Base Member Join Date: May 2012 Location: Georgia Posts: 128 Drives: AMG C43 Rep Power: 13	I put the black back price back in, just to have it there and to protect the wiring.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Z1 Motorsports JDM Fog Light Light Installation Kit (Starting @ $18.00 w/ out Light)	Dustin@Z1	Body Interior/Exterior	4	11-04-2016 06:16 AM
VDC off light / VDC slip light constant on with parking brake light acting slip light	ZeN	Nissan 370Z Warranty / Scheduled Maintenance / Servicing / Repairs	0	08-27-2012 11:04 AM
Local 370z needed for smoked tail light and head light fitting	dantegts	Southern California Region	11	04-07-2010 08:55 PM
Question about fog light for the guys with the factory fog light from Canada/Europe	Jowe	Exterior & Interior	28	09-27-2009 01:50 PM
smoked tail light and head light volunteer covina, ca area	dantegts	Exterior & Interior	0	08-29-2009 01:33 PM