07-09-2016, 08:53 PM
|
#3 (permalink)
|
|
Base Member
Join Date: May 2016
Location: N.Cali
Posts: 14
Drives: 16nismo
Rep Power: 9
|
Quote:
Originally Posted by 37Z
Check the air filter; if excessively dirty, replace.
Typical DIY checks:
Check all fluids (brake, water coolant, wiper reservoir, manual clutch fluid and top off as needed). If low, check for any leaks
Inspect brake rotors/pads for uneven wear
Inspect tires for uneven wear
Check tire lug nuts for correct torque - re-tighten as needed
Check tire pressure in all tires including spare tire
Check all hoses clamps are tight per specs
It any leaks, engine running issues, take it to the dealer to check any codes and service your Z as necessary.
|
sorry if these questions has been asked and answered...i used the search bar and it lead me here. what are the torque specs for lug nuts and oil drain plug? thanks
|
|
|
Similar Threads
Threaded Mode
