DIY: Rear Fog-Lamp "Z" light

horty24 · 05-27-2014, 09:41 PM

Ok adding to this thread a year later. I pried gently around the top with a razor to start cutting into the glued surface. Then gently kept going around until the lens popped off. I put frog tape around the lens to protect it from scratching it.

Then I drilled a 13/32 hole onto the housing.

Next step is to insert a 3 watt eagle eye led light that I got from amazon and secured with the supplied nut.

final result was this...

. So there is definitely more brightness towards the upper corner so tomorrow in going to spray paint this chrome to add reflection.

. This is as far as I got tonight. But the plan is to insert another led in there and run wires, one up to the tail lights and one to the brake light. Then hey it all sealed up. Final mod will run less than 15$. More info to come later.

Bananaz · 08-22-2014, 04:03 PM

Definitely doing this soon!

Dredrizzlez · 09-01-2014, 11:09 PM

I tapped into the license plate light and the bulb is super bright one the fog light and hot, I hooked it up in parallel too. It's not supposed to be that bright is it?

Bananaz · 09-08-2014, 12:22 AM

Did mine this weekend and followed JARblue's method and I LOVE it.

Wiring was super easy, I tapped into the license plate light. Only part I didn't like was popping the lens off, I cracked the corner but super glued it.

paoZ · 09-08-2014, 08:52 PM

I need to do this on mine..looks pretty cool..

JARblue · 09-13-2014, 06:02 PM

Quote:

Originally Posted by Bananaz

Did mine this weekend and followed JARblue's method and I LOVE it.

Wiring was super easy, I tapped into the license plate light. Only part I didn't like was popping the lens off, I cracked the corner but super glued it.

Yeah, you just have to go slow with the lens. IIRC, I just used a flat head screwdriver to pry it off. It will make some evil noises as you go along, but the key is to not rush it.

05-27-2014, 09:41 PM	#16 (permalink)
horty24 Base Member Join Date: Mar 2014 Location: wv Age: 48 Posts: 116 Drives: 2009 370Z Touring Sp Rep Power: 3366	Ok adding to this thread a year later. I pried gently around the top with a razor to start cutting into the glued surface. Then gently kept going around until the lens popped off. I put frog tape around the lens to protect it from scratching it. Then I drilled a 13/32 hole onto the housing. Next step is to insert a 3 watt eagle eye led light that I got from amazon and secured with the supplied nut. final result was this.... So there is definitely more brightness towards the upper corner so tomorrow in going to spray paint this chrome to add reflection.. This is as far as I got tonight. But the plan is to insert another led in there and run wires, one up to the tail lights and one to the brake light. Then hey it all sealed up. Final mod will run less than 15$. More info to come later. __________________ 2000 Celica gts: daily beater 2007 GMC Acadia: family ship 2009 370Z: sunny day delight

08-22-2014, 04:03 PM	#17 (permalink)
Bananaz Track Member Join Date: Dec 2013 Location: Central Jersey Posts: 637 Drives: 09 370z 6MT/B+Sport Rep Power: 13	Definitely doing this soon! __________________ BC - SSR - Evo-R - ViS - SPC - ZSpeed - Beluga - Blox - 35% Tint - Clutch Spring - Fang Forced Air Ducting

09-08-2014, 12:22 AM	#19 (permalink)
Bananaz Track Member Join Date: Dec 2013 Location: Central Jersey Posts: 637 Drives: 09 370z 6MT/B+Sport Rep Power: 13	Did mine this weekend and followed JARblue's method and I LOVE it. Wiring was super easy, I tapped into the license plate light. Only part I didn't like was popping the lens off, I cracked the corner but super glued it. JARblue likes this. __________________ BC - SSR - Evo-R - ViS - SPC - ZSpeed - Beluga - Blox - 35% Tint - Clutch Spring - Fang Forced Air Ducting

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
"Service engine soon" light	import111	Engine & Drivetrain	71	06-29-2016 12:57 AM
Question about the Euro Spec. rear "Fog Light"	Arizona Z	Exterior & Interior	7	03-26-2010 09:01 AM
"Z" rear badge anyone?	FricFrac	Nissan 370Z General Discussions	6	06-17-2009 03:11 PM
Break in - drive it "hard" or "be gentle"?	kannibul	Engine & Drivetrain	3	06-06-2009 02:51 AM
Any Update on the "Rear Fog Light"	Arizona Z	Nissan 370Z General Discussions	4	05-10-2009 12:21 AM

09-01-2014, 11:09 PM	#18 (permalink)
Dredrizzlez Base Member Join Date: Jul 2014 Location: Des moines Posts: 17 Drives: 09 Nissan 370z Rep Power: 11	I tapped into the license plate light and the bulb is super bright one the fog light and hot, I hooked it up in parallel too. It's not supposed to be that bright is it?

09-08-2014, 08:52 PM	#20 (permalink)
paoZ Base Member Join Date: Jan 2012 Location: Long Beach Posts: 6 Drives: 10 Nissan 370z Rep Power: 13	I need to do this on mine..looks pretty cool..