DIY: Weight reduction/Fix hatch not opening issue

geddit · 06-12-2019, 12:46 PM

Remove the weights from both cars and spent 60 cents buying 16 washers (4 for each car) for spring helpers. Sorted..

ryennn · 10-05-2019, 07:53 PM

Quote:

Originally Posted by ryennn

So I added 2 nickels to the bottom of each spring and it worked! Finally I don't have to use both hands to open my trunk! Hopefully it stays this way

Thanks again for this DIY fix/mod! I was very hesitant to take the panel off myself because of the clips, especially those white ones! Was going to bring it to stealership to get it looked at, but I just went ahead and did it; and I'm glad I did!

Since this post I've had to add 4 more coins on each side. I cant add anymore else it the rubber doesn't close/fit.

Problem has been back

Sent from my SM-N960W using Tapatalk

ABUNAI NISMO · 04-26-2020, 12:00 AM

I have read about the useless weight in the rear trunk lid. I was bored and thought I would have a go at releasing some weight on the Z! To my surprise the weight was not part of my factory install. I guess I am happy. I wanted the satisfaction to remove it myself though...

Cyber370 · 04-26-2020, 08:40 AM

Quote:

Originally Posted by ABUNAI NISMO

I have read about the useless weight in the rear trunk lid. I was bored and thought I would have a go at releasing some weight on the Z! To my surprise the weight was not part of my factory install. I guess I am happy. I wanted the satisfaction to remove it myself though...

Hmmm, I wonder if my '16 Nismo has it? Too lazy to find out but I have no issues with my hatch so I guess I will leave it. I'll bet the weight was left out of all redesigned Nismo's ('15 and up). Maybe someone with an earlier Nismo will chime in.

Javier · 08-01-2020, 09:07 PM

My understanding is that the weight was added to keep the hatch from buffeting and vibrating at high speeds. I spoke to a friend of mine that works at Nissan R&D.

Spartan 1771 · 08-01-2020, 10:02 PM

Quote:

Originally Posted by Javier

My understanding is that the weight was added to keep the hatch from buffeting and vibrating at high speeds. I spoke to a friend of mine that works at Nissan R&D.

I've never heard any buffeting coming from the hatch since removing it.

fusion0979 · 10-23-2020, 01:46 PM

Removed today the weight from MY2013 Nismo

This helped, and it now pops up if I press the button once!

geokots · 03-16-2021, 01:57 PM

I tried this (weight reduction and 2 nickels each side) and it worked for a while but now it won't fully open. Does anyone know where to get spring replacement that's either bigger or stronger than stock?

filip00 · 08-21-2021, 01:55 PM

Just pulled out this weight out of my Sep 2009 370z.
The hatch seems to close exactly the same as before, whereas when opening it, sometimes it pops fully open (one handed opening), sometimes I need to help it up. Anyway, I'm happy to have removed it.

redondoaveb · 08-21-2021, 02:14 PM

Quote:

Originally Posted by filip00

Just pulled out this weight out of my Sep 2009 370z.
The hatch seems to close exactly the same as before, whereas when opening it, sometimes it pops fully open (one handed opening), sometimes I need to help it up. Anyway, I'm happy to have removed it.

I've got these springs. Very high quality and the hatch opens everytime
https://www.opentop.fr/product-page/...e-370z?lang=en

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
The 370Z Weight Reduction Thread	RCZ	Exterior & Interior	832	11-07-2024 06:47 PM
Weight Reduction	whoLEEoh	Track / Autocross / Drifting / Dragstrip	7	12-13-2010 05:03 PM
Weight Reduction and weight distribution!	370zForever	Tuning	4	09-25-2009 04:15 PM
Weight Reduction Question	armensti	Nissan 370Z General Discussions	16	07-29-2009 05:46 AM

06-12-2019, 12:46 PM	#151 (permalink)
geddit Base Member Join Date: Dec 2011 Location: Brunei Posts: 17 Drives: '10 370Z 6MT, 09 AT Rep Power: 13	Remove the weights from both cars and spent 60 cents buying 16 washers (4 for each car) for spring helpers. Sorted..

08-01-2020, 09:07 PM	#155 (permalink)
Javier Base Member Join Date: Jan 2010 Location: Illinois Posts: 40 Drives: 09 nissan 370z Rep Power: 10138	My understanding is that the weight was added to keep the hatch from buffeting and vibrating at high speeds. I spoke to a friend of mine that works at Nissan R&D.

10-23-2020, 01:46 PM	#157 (permalink)
fusion0979 Base Member Join Date: May 2020 Location: Klaipeda, Lihtuania Posts: 9 Drives: 13 Nissan 370Z Nismo Rep Power: 3360	Removed today the weight from MY2013 Nismo This helped, and it now pops up if I press the button once!

03-16-2021, 01:57 PM	#158 (permalink)
geokots Base Member Join Date: Feb 2020 Location: Toronto Posts: 67 Drives: 370Z (soon) Rep Power: 5	I tried this (weight reduction and 2 nickels each side) and it worked for a while but now it won't fully open. Does anyone know where to get spring replacement that's either bigger or stronger than stock?

08-21-2021, 01:55 PM	#159 (permalink)
filip00 Track Member Join Date: May 2021 Location: slovenia Posts: 556 Drives: 370z pack Rep Power: 125427	Just pulled out this weight out of my Sep 2009 370z. The hatch seems to close exactly the same as before, whereas when opening it, sometimes it pops fully open (one handed opening), sometimes I need to help it up. Anyway, I'm happy to have removed it.