You can get them from the retrofit source.
Morimoto CCFL Angel Eyes - Accessories from The Retrofit Source Inc

I'm not sure about the size, but I think the lenses are 3'', which is the same as the 350z. I believe the 350 also used 95mm.

It's also here:
Angel Eye Halo CCFL 95mm WHITE rings

I had planned on doing this mod, but have since decided to just black out my headlights and go after a stealth look.

Anyway, I wired up a couple LED strands but won't be using them. If anyone is interested they are listed in the for sale section, just do a search for my username and they should come up.

please help i want to run the Iron-Man and Landing Strip how to connect the wire? connect all in parking light?? pleae help thank so much

I recently tackled this and it took a few days, but saved a ton. I worked on the headlights all week after work and total cost..........Less that $20

After I took apart the headlights, I applied the Krylon Fusion Satin and installed the LEDs. It takes 18 total, but I purchased a couple of extra. The LEDs I purchased cost .48 a piece and the color is around 5000k matching my LED parking lights. The LED's are 5mm with built-in resistors which made things a lot easier. They are super bright and crisp & clean. Here's a link to where I purchased them from:

5mm 12v Pre-Wired LED White Ultra Bright 15,000 mcd

I connected the LEDS to an ignition hot (+) in the fuse box by the drivers side kick panel so they are illuminated whenever the ignition is on. Looks fantastic day & night.

http://i269.photobucket.com/albums/j...z/P9250797.jpg
http://i269.photobucket.com/albums/j...z/P9250798.jpg
http://i269.photobucket.com/albums/j...z/P9300811.jpg
http://i269.photobucket.com/albums/j...z/P9300812.jpg
http://i269.photobucket.com/albums/j...z/P9300815.jpg

Landing lights look great and glad you took care of the egg yokes. Very clean looking !

Thanks. I used "chrome" covered amber turn signal bulbs (front & rear), deleted the amber parking light and added a 5000k parking light. Much cleaner look

What brand, part # and source for chrome cover amber turn signals? I have been using LED turn signals and they are not bright enough for me.

The chrome ones aren't as bright as a regular amber bulb due to the chrome coating, but it gets rid of the yoke and looks cleaner. Here's where I get mine:

Chrome Bulbs Autolumination.com

It's the W21Y T20mm Diameter - Plastic Wedge Base. I believe it's the 7443 for the front and 7440 for the rear.

This is what I use for my front parking light:

5K WHITE 13 LED LIGHT BULBS 158 168 194 2825 | 1 PAIR

Thanks for the info. I actually have the v-leds as the running parking lights. Will give the chrome bulbs a try.

A couple of nights shots showing my 2 favorite toyz:

http://i269.photobucket.com/albums/j...2_211448-1.jpg

http://i269.photobucket.com/albums/j...012_211305.jpg

Looks great

It looks fricken awesome, excellent job dude!

That's hot as hell man! I'd love to do something like that on mine. I got the front LED running lights too, so that may make it look a little better.

Why dont you test the LEDs by reconnecting the battery as opposed to taping all of those little batteries together?

why do you need the resistors? and why cant i see them in your harness? im no electrician!