Nissan 370Z Forum  

DIY: Fang Vents: Forced fresh air to your airbox

I did this about 2 months ago, haven't posted my pics yet. Install was simple and really straight forward. Good write up by the OP. +rep for that good sir.

Go Back   Nissan 370Z Forum > Nissan 370Z Tech Area > DIY Section (Do-It-Yourself)


Like Tree23Likes

Reply
 
LinkBack Thread Tools Display Modes
Old 09-01-2014, 08:57 PM   #1 (permalink)
Base Member
 
Join Date: Oct 2013
Location: NOLA
Posts: 51
Drives: 09' 370Z 6MT
Rep Power: 12
Antistupid is on a distinguished road
Default

I did this about 2 months ago, haven't posted my pics yet. Install was simple and really straight forward. Good write up by the OP. +rep for that good sir.

I have noticed that my cruising (70mph) oil temp doesn't hit the 220-230 like it use to, I'm not sure if this is 100% due to the ducting but Ill take even 210 @ 70mph all day. the oil cooler should handle the rest!

I have noticed a incredible amount of large debris in my airbox, as stated by the OP regarding air filter cleaning intervals. Keep them clean more often and vacuum out the bugs, flowers, grass, and sand. This debris doesn't worry me, but the following does;

After a short drive home in the rain, storm I should say, from work (5miles, under 45mph) last week I did notice that I grabbed some moisture on/around my filters. The intake above the filters was DRY, so don't misunderstand me. In the airbox I didn't notice any beading/pooling of water, but it was clearly damp. The filter also must have soaked some moisture as the K&N oil had been displaced (very slightly). We tend to get some serious rain down here, and generally humid days, so I will be keeping an eye on them when the roads are wet.

My remedy may be simple. I ordered 2 AEM bypass valves which I have on my Sentra (VQ35HR swap). I plan to install them on the aluminum couplings. I haven't decided yet as to whether I will install them at the beginning of the line (bumper) or end (airbox). I think available space will make the determination. I will try to post some photos when this is complete and my verdict.
Antistupid is offline   Reply With Quote
Old 05-28-2015, 06:05 AM   #2 (permalink)
Enthusiast Member
 
KoolKarmaJoe's Avatar
 
Join Date: Jan 2015
Location: Baltimore MD
Posts: 417
Drives: 09' Nissan 370Z R M6
Rep Power: 12
KoolKarmaJoe has much to be proud ofKoolKarmaJoe has much to be proud ofKoolKarmaJoe has much to be proud ofKoolKarmaJoe has much to be proud ofKoolKarmaJoe has much to be proud ofKoolKarmaJoe has much to be proud ofKoolKarmaJoe has much to be proud ofKoolKarmaJoe has much to be proud ofKoolKarmaJoe has much to be proud of
Default

Quote:
Originally Posted by Antistupid View Post
I did this about 2 months ago, haven't posted my pics yet. Install was simple and really straight forward. Good write up by the OP. +rep for that good sir.

I have noticed that my cruising (70mph) oil temp doesn't hit the 220-230 like it use to, I'm not sure if this is 100% due to the ducting but Ill take even 210 @ 70mph all day. the oil cooler should handle the rest!

I have noticed a incredible amount of large debris in my airbox, as stated by the OP regarding air filter cleaning intervals. Keep them clean more often and vacuum out the bugs, flowers, grass, and sand. This debris doesn't worry me, but the following does;

After a short drive home in the rain, storm I should say, from work (5miles, under 45mph) last week I did notice that I grabbed some moisture on/around my filters. The intake above the filters was DRY, so don't misunderstand me. In the airbox I didn't notice any beading/pooling of water, but it was clearly damp. The filter also must have soaked some moisture as the K&N oil had been displaced (very slightly). We tend to get some serious rain down here, and generally humid days, so I will be keeping an eye on them when the roads are wet.

My remedy may be simple. I ordered 2 AEM bypass valves which I have on my Sentra (VQ35HR swap). I plan to install them on the aluminum couplings. I haven't decided yet as to whether I will install them at the beginning of the line (bumper) or end (airbox). I think available space will make the determination. I will try to post some photos when this is complete and my verdict.
Did you get AEM By Pass Valves installed? Where did you decide on placement?
KoolKarmaJoe is offline   Reply With Quote
Old 05-29-2015, 02:06 AM   #3 (permalink)
Base Member
 
Join Date: Oct 2013
Location: NOLA
Posts: 51
Drives: 09' 370Z 6MT
Rep Power: 12
Antistupid is on a distinguished road
Default

I sure didn't. Their diameter is off.

I haven't noticed any additional water however, and only on one other occasion would I say I had seen some dampness on the filter. But both times I was in some really heavy rain at highway speed.

I know the OP stated that you may need to clean the filters more often, yeah I knock mine clean every other fill up and clean the filters every month or so. I seem to suck up an extreme amount of sand. Not too many bugs or leaves.
Antistupid is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
DIY: Extra air to stock airbox Mandingo DIY Section (Do-It-Yourself) 14 03-17-2013 01:35 PM
[FOR SALE] Stock Airbox Assemblies sixpax Parts for sale (Private Classifieds) 19 03-12-2013 06:47 PM
Factory Airbox Mod? ThaMailman Intake/Exhaust 12 01-26-2011 04:25 PM
Fang Vents: Forced air DIY....> Modshack Intake/Exhaust 4 06-29-2009 10:49 AM
Found a prize in my left airbox molamann Nissan 370Z General Discussions 17 05-19-2009 08:12 PM


All times are GMT -5. The time now is 07:54 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2