DIY: how to make your headlights black housing with 20 bucks...

simota1 · 02-12-2012, 11:08 PM

Quote:

Originally Posted by Flushnismo

I tinted mine with vht nightshades paint. Looks a lot better IMO

X2

yellogixxer · 02-23-2012, 09:03 AM

Quote:

Originally Posted by Ni55anPat

What did u guys do with the huge orange reflector? Paint over it ?

I covered mine with 3M Carbon Fiber Di Noc, along with a couple other accents, including the "landing strip". Looks bad-*** IMO.

simota1 · 02-23-2012, 04:00 PM

badass bro great idea

Dark Sarcasm · 03-19-2012, 08:25 PM

For those that have painted their lights - Did you use a primer on the housing? I plan on painting the housing Gun Metallic to match. If I use a primer do I have to sand it before applying the Gun Metallic coat?

yellogixxer · 03-20-2012, 01:59 PM

Quote:

Originally Posted by Dark Sarcasm

For those that have painted their lights - Did you use a primer on the housing? I plan on painting the housing Gun Metallic to match. If I use a primer do I have to sand it before applying the Gun Metallic coat?

I didn't use a primer, but you definitely have to sand down the plastic "chrome", otherwise the paint will not stick. Use a Scotch-Brite or similar pad, as opposed to sandpaper, so as not to sand down any of the detail in the plastic.

leeyeegue · 03-27-2012, 11:37 PM

Hey Simota, nice write up, I just did mine today. I'm having second thoughts... Since you said you used Krylon Fusion and you didn't prep the chrome, I didnt sand it or anything either. Paint seemed to stick no problem, but over time will it? Have yours chipped off or anything?

Ill · 04-05-2012, 03:57 PM

I am attempting this today, first time baking a headlight for any of the cars I have owned, only problem is I cannot get the HID ballast and wires. All of the others wires and bulbs have been removes no problem.

Would I be able to bake in the oven at 225 for about 13 minutes? I have tried using a heat gun but everywhere I read seems to agree the oven is faster and easier as well as giving you more control.

-Ill

leeyeegue · 04-05-2012, 04:01 PM

I did 250 for like 8 minutes and it worked pretty well. Every oven is different so around there should be fine.

I put a tray upside down on the bottom, another tray on top of that tray and some micro fiber towels on the top tray just in case the headlight melted :S

Quote:

Originally Posted by Ill

I am attempting this today, first time baking a headlight for any of the cars I have owned, only problem is I cannot get the HID ballast and wires. All of the others wires and bulbs have been removes no problem.

Would I be able to bake in the oven at 225 for about 13 minutes? I have tried using a heat gun but everywhere I read seems to agree the oven is faster and easier as well as giving you more control.

-Ill

Ron · 04-05-2012, 07:17 PM

Quote:

Originally Posted by leeyeegue

Hey Simota, nice write up, I just did mine today. I'm having second thoughts... Since you said you used Krylon Fusion and you didn't prep the chrome, I didnt sand it or anything either. Paint seemed to stick no problem, but over time will it? Have yours chipped off or anything?

I've hd mine for a year now, still looks the same. The only thing I did was clean the chrome with alcohol and paint right over it.

leeyeegue · 04-05-2012, 07:39 PM

Thanks!

Sent from my SAMSUNG-SGH-I717 using Tapatalk

Ill · 04-05-2012, 09:05 PM

Quote:

Originally Posted by leeyeegue

I did 250 for like 8 minutes and it worked pretty well. Every oven is different so around there should be fine.

I put a tray upside down on the bottom, another tray on top of that tray and some micro fiber towels on the top tray just in case the headlight melted :S

When you did it, did you leave the all the wires and stuff on? That is my only problem right now, I cannot get the ballast and wire out and I am afraid that the heat will melt them and not be functional afterwards.

leeyeegue · 04-05-2012, 09:11 PM

Quote:

Originally Posted by Ill

When you did it, did you leave the all the wires and stuff on? That is my only problem right now, I cannot get the ballast and wire out and I am afraid that the heat will melt them and not be functional afterwards.

I did. I was lazy

Sent from my SAMSUNG-SGH-I717 using Tapatalk

Ill · 04-05-2012, 09:16 PM

Awesome. Here goes nothing

leeyeegue · 04-05-2012, 10:18 PM

Yah call me crazy but I baked the whole thing with bulbs lol

Sent from my SAMSUNG-SGH-I717 using Tapatalk

Dzel · 04-05-2012, 10:41 PM

And no problems?

02-23-2012, 04:00 PM	#123 (permalink)
simota1 A True Z Fanatic Join Date: May 2009 Location: Dededo, Guam Posts: 6,642 Drives: solid red 370z 6mt Rep Power: 405	badass bro great idea __________________ *TOP SECRET/POWERHOUSE AMUSE/ARC/DAYTONA RACING/VARIS/MINES/GANADOR/J-LINE/WORK EMOTION CR KAI/GT SPEC/CARBON SIGNAL/ZOOM ENGINEERING/ CARBON FIBER ELEMENT/STILLEN/*

03-19-2012, 08:25 PM	#124 (permalink)
Dark Sarcasm Track Member Join Date: Dec 2010 Location: Katy Texas Posts: 552 Drives: 11 CTS-V Coupe Rep Power: 15	For those that have painted their lights - Did you use a primer on the housing? I plan on painting the housing Gun Metallic to match. If I use a primer do I have to sand it before applying the Gun Metallic coat? __________________ wax

04-05-2012, 10:41 PM	#135 (permalink)
Dzel A True Z Fanatic Join Date: May 2011 Location: Midland, TX Posts: 3,884 Drives: 11 370Z PW M6 Rep Power: 23	And no problems? __________________ 10secWS6 IF YOU CAN'T SWING IT THEN DON'T BRING IT! Check out Domestic Performance C.C.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] your oem headlights plus $200 for my black housing	im89	Parts for sale (Private Classifieds)	35	02-27-2012 02:54 PM
Housing headlights in vancouver area	hyunsoo1803	Canada	9	01-21-2012 06:06 AM
Looking to get headlights housing black out near Baltimore Area	tonybui	Exterior & Interior	0	09-27-2011 12:40 AM
Black housing headlights	im89	North East Region	5	08-31-2011 09:04 AM
SO i finally had the balls to do it.... $20 black housing headlights!!!!	simota1	Exterior & Interior	53	06-29-2009 01:14 AM

03-27-2012, 11:37 PM	#126 (permalink)
leeyeegue Base Member Join Date: May 2011 Location: Indiana Posts: 230 Drives: 370Z Rep Power: 14	Hey Simota, nice write up, I just did mine today. I'm having second thoughts... Since you said you used Krylon Fusion and you didn't prep the chrome, I didnt sand it or anything either. Paint seemed to stick no problem, but over time will it? Have yours chipped off or anything?

04-05-2012, 03:57 PM	#127 (permalink)
Ill Base Member Join Date: Mar 2012 Location: Bellevue Posts: 177 Drives: 09 370z Base 6MT Rep Power: 13	I am attempting this today, first time baking a headlight for any of the cars I have owned, only problem is I cannot get the HID ballast and wires. All of the others wires and bulbs have been removes no problem. Would I be able to bake in the oven at 225 for about 13 minutes? I have tried using a heat gun but everywhere I read seems to agree the oven is faster and easier as well as giving you more control. -Ill

04-05-2012, 07:39 PM	#130 (permalink)
leeyeegue Base Member Join Date: May 2011 Location: Indiana Posts: 230 Drives: 370Z Rep Power: 14	Thanks! Sent from my SAMSUNG-SGH-I717 using Tapatalk

04-05-2012, 09:16 PM	#133 (permalink)
Ill Base Member Join Date: Mar 2012 Location: Bellevue Posts: 177 Drives: 09 370z Base 6MT Rep Power: 13	Awesome. Here goes nothing

04-05-2012, 10:18 PM	#134 (permalink)
leeyeegue Base Member Join Date: May 2011 Location: Indiana Posts: 230 Drives: 370Z Rep Power: 14	Yah call me crazy but I baked the whole thing with bulbs lol Sent from my SAMSUNG-SGH-I717 using Tapatalk