DIY: illuminated kick plates color change

XwChriswX · 08-11-2009, 04:15 PM

Just FMI, do you order LEDs and wire and do the wiring yourself? Because I know of a GREAT site to order pre-wired LEDs of the 3mm and 5mm variety very cheap and super fast shipping... Just trying to help you with cost/labor. Unless your REALLY into that sort of thing lol.

Cjanik · 08-11-2009, 07:28 PM

I dont re-wire anything, I use the existing board that comes with the Illuminated kick plates. Also, The LED's on these are 1mm x half a mm

Thanks for the Idea though!

Shunya · 08-12-2009, 07:50 AM

shush all, the pink ones are pwnage :P

Spec Jay · 08-18-2009, 02:07 AM

think imma try it. never really done circuit board soldering but done regular soldering.
its pretty much make sure the solder gets only hot enough to remove the led and then create a good contact when remelting it right?
0603 SMD LED - Sapphire Blue UT-692NB
that the one you use for the blues?

Cjanik · 08-18-2009, 07:31 PM

actually use this site and their LED's. they are cheaper and easier to deal with.

Kingbright USA, an opto-electronic LED manufacturer products include all type of LED LAMPS , SMT LED, SMD LED, LED DISPLAYS optoelectronic components

here's the blue one you'll want:
http://www.kingbrightusa.com/product...06PBC/Z-PRV-SI

and yes your correct, its the same except you'll need small needlenose pliers to work with the led's, and dont overheat them as you stated. I believe I have my soldering Iron at 750degrees.

phelan · 08-18-2009, 08:18 PM

mmm kingbright...

(still trying to carve out time to install those plates ><' )

vipor · 08-18-2009, 09:48 PM

just ordered my white LEDs from the lc-led company the other day. hopefully i'll have them soon. i was definitely disappointed when i saw the factory setup so this will be my first mod to the new ride

Cjanik · 08-18-2009, 10:42 PM

Quote:

Originally Posted by phelan

mmm kingbright...

(still trying to carve out time to install those plates ><' )

yes thank you for that kingbright website, its my new source for all LED's!!

I dont think installing those kick plates should take more than half an hour, there's a plug about 1 foot away from the kick plate that you disconnect/reconnect.

XwChriswX · 08-19-2009, 10:24 AM

Cjanik, you can install these in the recesses that the base model plastic ones come in right? Cause I might possibly be getting mine this weekend, and they said they have the 'exact' model im looking for on the lot but I can't remember if I told them lighted plates or not...

Cjanik · 08-19-2009, 03:24 PM

Yeah it doesnt matter if it cmes with illuminated kick plates or not. It will snap into place and fit. The downside of having a car without the illuminated kick plates is, ull need to run the wiring harness that comes with the illuminated kick plates that i send you. Its got the instructions and all parts necessary so its easy, just a little time consuming.

XwChriswX · 08-19-2009, 03:51 PM

Its as time consuming as you make it... Mr. Install =)

jookiyaya · 08-20-2009, 07:25 AM

what was the led for the frosty white i mean frosty light blue? im interested because im getting my kick plates from the dealer instead of getting them installed, was it hard wiring it up? i heard u can easily bend the metal and/or scratch the aluminum.....

Cjanik · 08-20-2009, 09:09 AM

The wiring is easy, you just snap in a plug into the wiring harness by the passanger kick panel, and then run the wires to the kick plates.

taking it apart is a little harder, I have 1 set thats not worth anything because i bent/scratched the aluminum and now it looks like crap.

vipor · 09-03-2009, 06:24 PM

Got my set installed last night, it was super easy. The only slightly difficult part was getting the wire from the passenger to the driver side. The instructions are basically for a non-carpeted car (without the styrofoam too) it seems, so it was a little different than what they had described. I'll post my crappy iphone pictures and a little diy on how I did it a little later.

I initially attempted to modify the LEDs myself but ended up with a slight *oops* when separating the aluminum from the plastic. The soldering and such is easy for me, but I prefer to have perfect parts in a new car rather than ones with even slight issues. I later ordered a set from Cjanik and got them installed and they look great.

bigaudiofanat · 09-03-2009, 06:56 PM

Quote:

Originally Posted by Shunya

shush all, the pink ones are pwnage :P

okay

08-11-2009, 04:15 PM	#76 (permalink)
XwChriswX WFLYIDNNE Join Date: Jul 2009 Location: In The Fastlane Posts: 50,648 Drives: 02 GDB WRX Rep Power: 452	Just FMI, do you order LEDs and wire and do the wiring yourself? Because I know of a GREAT site to order pre-wired LEDs of the 3mm and 5mm variety very cheap and super fast shipping... Just trying to help you with cost/labor. Unless your REALLY into that sort of thing lol. __________________ Bonnie - Stage 2, Audio build coming this fall! R.I.P. Abby 3/29/10 - 3/30/14

08-18-2009, 02:07 AM	#79 (permalink)
Spec Jay A True Z Fanatic Join Date: Apr 2009 Location: Bummerton Posts: 1,510 Drives: MtB 09 370z Rep Power: 19	think imma try it. never really done circuit board soldering but done regular soldering. its pretty much make sure the solder gets only hot enough to remove the led and then create a good contact when remelting it right? 0603 SMD LED - Sapphire Blue UT-692NB that the one you use for the blues? __________________ 09 Monterey Blue Global Time Attack Street Class Build Build Thread:Saber! Instagram:@SpecJay

08-18-2009, 07:31 PM	#80 (permalink)
Cjanik Track Member Join Date: May 2009 Location: Las Vegas Posts: 578 Drives: N/A Rep Power: 17	actually use this site and their LED's. they are cheaper and easier to deal with. Kingbright USA, an opto-electronic LED manufacturer products include all type of LED LAMPS , SMT LED, SMD LED, LED DISPLAYS optoelectronic components here's the blue one you'll want: http://www.kingbrightusa.com/product...06PBC/Z-PRV-SI and yes your correct, its the same except you'll need small needlenose pliers to work with the led's, and dont overheat them as you stated. I believe I have my soldering Iron at 750degrees. Last edited by Cjanik; 08-18-2009 at 07:33 PM.

08-19-2009, 10:24 AM	#84 (permalink)
XwChriswX WFLYIDNNE Join Date: Jul 2009 Location: In The Fastlane Posts: 50,648 Drives: 02 GDB WRX Rep Power: 452	Cjanik, you can install these in the recesses that the base model plastic ones come in right? Cause I might possibly be getting mine this weekend, and they said they have the 'exact' model im looking for on the lot but I can't remember if I told them lighted plates or not... __________________ Bonnie - Stage 2, Audio build coming this fall! R.I.P. Abby 3/29/10 - 3/30/14

08-19-2009, 03:51 PM	#86 (permalink)
XwChriswX WFLYIDNNE Join Date: Jul 2009 Location: In The Fastlane Posts: 50,648 Drives: 02 GDB WRX Rep Power: 452	Its as time consuming as you make it... Mr. Install =) __________________ Bonnie - Stage 2, Audio build coming this fall! R.I.P. Abby 3/29/10 - 3/30/14

08-11-2009, 07:28 PM	#77 (permalink)
Cjanik Track Member Join Date: May 2009 Location: Las Vegas Posts: 578 Drives: N/A Rep Power: 17	I dont re-wire anything, I use the existing board that comes with the Illuminated kick plates. Also, The LED's on these are 1mm x half a mm Thanks for the Idea though!

08-12-2009, 07:50 AM	#78 (permalink)
Shunya A True Z Fanatic Join Date: May 2009 Location: Vancouver Posts: 3,069 Drives: You Crazy! Rep Power: 22	shush all, the pink ones are pwnage :P

08-18-2009, 08:18 PM	#81 (permalink)
phelan A True Z Fanatic Join Date: Apr 2009 Location: CA Age: 38 Posts: 9,513 Drives: Scoobaroo Rep Power: 3406	mmm kingbright... (still trying to carve out time to install those plates ><' )

08-18-2009, 09:48 PM	#82 (permalink)
vipor A True Z Fanatic Join Date: Aug 2009 Location: Euless, TX [ DFW ] Age: 42 Posts: 13,531 Drives: Nismo 09-0183 QAB Rep Power: 49	just ordered my white LEDs from the lc-led company the other day. hopefully i'll have them soon. i was definitely disappointed when i saw the factory setup so this will be my first mod to the new ride

08-19-2009, 03:24 PM	#85 (permalink)
Cjanik Track Member Join Date: May 2009 Location: Las Vegas Posts: 578 Drives: N/A Rep Power: 17	Yeah it doesnt matter if it cmes with illuminated kick plates or not. It will snap into place and fit. The downside of having a car without the illuminated kick plates is, ull need to run the wiring harness that comes with the illuminated kick plates that i send you. Its got the instructions and all parts necessary so its easy, just a little time consuming.

08-20-2009, 07:25 AM	#87 (permalink)
jookiyaya Enthusiast Member Join Date: Jul 2009 Location: maryland Posts: 262 Drives: 2010 40th Z!?!? Rep Power: 16	what was the led for the frosty white i mean frosty light blue? im interested because im getting my kick plates from the dealer instead of getting them installed, was it hard wiring it up? i heard u can easily bend the metal and/or scratch the aluminum.....

08-20-2009, 09:09 AM	#88 (permalink)
Cjanik Track Member Join Date: May 2009 Location: Las Vegas Posts: 578 Drives: N/A Rep Power: 17	The wiring is easy, you just snap in a plug into the wiring harness by the passanger kick panel, and then run the wires to the kick plates. taking it apart is a little harder, I have 1 set thats not worth anything because i bent/scratched the aluminum and now it looks like crap.

09-03-2009, 06:24 PM	#89 (permalink)
vipor A True Z Fanatic Join Date: Aug 2009 Location: Euless, TX [ DFW ] Age: 42 Posts: 13,531 Drives: Nismo 09-0183 QAB Rep Power: 49	Got my set installed last night, it was super easy. The only slightly difficult part was getting the wire from the passenger to the driver side. The instructions are basically for a non-carpeted car (without the styrofoam too) it seems, so it was a little different than what they had described. I'll post my crappy iphone pictures and a little diy on how I did it a little later. I initially attempted to modify the LEDs myself but ended up with a slight oops when separating the aluminum from the plastic. The soldering and such is easy for me, but I prefer to have perfect parts in a new car rather than ones with even slight issues. I later ordered a set from Cjanik and got them installed and they look great. WI_Hedgehog likes this. __________________ 2009 NISMO # 0193 \| QAB \| Albums! \| 05.04.10 (Dynojet) 291.94hp/248.28tq Oil Cooler (DIY) \| Custom Headlights \| GTSPEC Braces \| F.I. Long Tube Headers

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY: Illuminated Kick Plates	ejrives	DIY Section (Do-It-Yourself)	133	07-12-2019 02:12 AM
Illuminated kick plates always on?	KptKIDLAT	Exterior & Interior	15	08-30-2012 11:08 PM
Illuminated kick plates in ANY Color	Cjanik	Parts for sale (Private Classifieds)	15	02-11-2011 12:19 PM
WTB: Illuminated Kick Plates	Boost_lee	Wanted	0	01-30-2011 04:28 PM
Illuminated Kick Plates	KptKIDLAT	DIY Section (Do-It-Yourself)	3	08-29-2010 09:53 AM