Anyone done a DIY for a 34r cooler install?
 

Can't seem to find a DIY for a 34r oil cooler. Is it much different than the 25row?

Been doing lots of searches with no luck :(

Looking to buy a Z1 or GTM 34r kit for tracking.

I did a Z1 34 row on my Nismo. It's pretty straight forward with the instructions from Z1. On the Nismo. I had to do alittle extra then what the instructions said. If you want pictures of what I did. Look through my journal. ;)

Thanks Rusty! Shall do

If you buy Z1 kit they give you detailed instructions with pics, helped me just fine with my install, just take your time, and if you have any hiccups or questions during install PM me :-)


Sent from my iPhone using Tapatalk

Thank you!

yes...and once you remove the bumper, it is pretty obvious how to mount it and it is very easy to install. Don't think you need to worry too much about the install. Took about 1.5 hours to do mine.

DIY should be the same as any other sized oil cooler. The cooler core itself will just be bigger. I just installed a Z1 34 row kit and their instructions were good enough with plenty of photos. Good luck :tup:

Anyone have the GTM kit? Seems to be the same as the Z1 kit (tube wraps, thermostatic plate, etc.) but for $80 bucks less...