My 2010 roadster came with the wire installed. Also, the old "blank" came out without a problem ... no issues with getting the nuts off. Maybe I'm just good at
|
|
LinkBack | Thread Tools | Display Modes |
03-18-2010, 10:23 PM | #121 (permalink) |
Base Member
Join Date: Nov 2009
Location: Virginia
Posts: 205
Drives: 300 ZXTT, 370 ZR
Rep Power: 15 |
My 2010 roadster came with the wire installed. Also, the old "blank" came out without a problem ... no issues with getting the nuts off. Maybe I'm just good at getting my nuts off.
Does anyone know exactly where that wire comes out? Details??? Pictures???
__________________
Black 300ZX TT Stock + Megan CBE; Black Cherry 370Z Roadster, 6MT, Touring, Sport, Nav., 3-way Fog Light (Running, brake & flashing backup), Triple Tone Air Horns. |
03-19-2010, 09:31 AM | #122 (permalink) |
Track Member
Join Date: Jun 2009
Location: NY
Posts: 770
Drives: 09 Blk Z Spt
Rep Power: 17 |
Ok well I will try to get some pictures up of my install. I also intend on tinting all the rear lights as I will be disassembling alot of the panels back there already. Oh boy....
|
03-20-2010, 01:45 PM | #123 (permalink) |
Track Member
Join Date: Jun 2009
Location: NY
Posts: 770
Drives: 09 Blk Z Spt
Rep Power: 17 |
Hey hopefully someone can help, I'm mid install, have the fog in place and all the panels off. All that's left is the actual wiring. As I'm no electrician I don't even know where to start. What should I wire it up to? I don't really know what a crimp is, and do I need extra wiring?? If someone knowledgable is available help a brother out haha.
|
03-20-2010, 03:48 PM | #124 (permalink) |
A True Z Fanatic
Join Date: Apr 2009
Location: SC
Posts: 2,464
Drives: 370Z
Rep Power: 544 |
If you just want it to cut on with your brake lights and make it is as simple as possible just splice the green wire going into your tail light and run it to the red wire on the fog light. Then just ground the black wire from the fog light on that big nut in the back of your trunk with all those ground wires on it.
|
03-20-2010, 04:20 PM | #125 (permalink) |
Track Member
Join Date: Jun 2009
Location: NY
Posts: 770
Drives: 09 Blk Z Spt
Rep Power: 17 |
So I finished the install will post some pictures in a little bit. Quick question. After disconnecting the battery, my windows go down a half inch when I open the doors but do not go back up once they're closed. There some simple fix
for this?? |
03-20-2010, 05:50 PM | #127 (permalink) |
A True Z Fanatic
Join Date: May 2009
Location: Dededo, Guam
Posts: 6,642
Drives: solid red 370z 6mt
Rep Power: 405 |
indeed it is lol
__________________
***TOP SECRET/POWERHOUSE AMUSE/ARC/DAYTONA RACING/VARIS/MINES/GANADOR/J-LINE/WORK EMOTION CR KAI/GT SPEC/CARBON SIGNAL/ZOOM ENGINEERING/ CARBON FIBER ELEMENT/STILLEN/***
|
03-21-2010, 06:12 PM | #128 (permalink) |
A True Z Fanatic
Join Date: Nov 2008
Location: Orange County, CA.
Posts: 1,205
Drives: 370Z Tour, Spt, 6mt
Rep Power: 644 |
Ok, I got my light in, bolts were a pain, went down to Home depot and purchased a pen type Bernzomatic torch $7.95 and fluid $2.99. Heated them up for about 10 sec. and they came right off. Have to be careful not to go to long because I melted the housing a bit on one side.
I've decided to just do the 4th brake light for now, I have the factory harness going to the dummy box, can someone tell me what would be the easiest way to make this work? Should I just bypass that and go to the tail light "green" wires and then ground the black, or is it easier to tap in higher up by the trunk firewall ? I've read through the entire thread, but I'm still not clear what would be the best way to go about it. Like I said, I do have the wiring harness going to the dummy box, so................ thanks
__________________
370z Tour| Spt Pack|Navi|BERK CBE|Berk HFC's| Eibach Springs| Hotchkis Sway Bars|SPC Camber Arms|15mm Ichiba Wheel Spacers| 19"Factory Nismo Wheels-Matt Black|Stop Tech Rotors|TWM Shifter|3M Tint|Black Fangs|Black Rear Valance|JDM Fog Light| MY BAND-www.myspace.com/petroleum |
03-21-2010, 06:26 PM | #129 (permalink) |
A True Z Fanatic
Join Date: Apr 2009
Location: SC
Posts: 2,464
Drives: 370Z
Rep Power: 544 |
Skip the dummy box. Run both wires into the trunk through the plug on the driver's side. It pops right out. From there you are right at the grounding point and the green brake wire is in the loom.
|
03-21-2010, 07:06 PM | #130 (permalink) |
A True Z Fanatic
Join Date: Nov 2008
Location: Orange County, CA.
Posts: 1,205
Drives: 370Z Tour, Spt, 6mt
Rep Power: 644 |
Ok, thanks I'll give it a shot, I got most stuff out of the trunk, but I'm not seeing the plug on the drivers side yet, I guess I need to remove the jack tray, etc.
__________________
370z Tour| Spt Pack|Navi|BERK CBE|Berk HFC's| Eibach Springs| Hotchkis Sway Bars|SPC Camber Arms|15mm Ichiba Wheel Spacers| 19"Factory Nismo Wheels-Matt Black|Stop Tech Rotors|TWM Shifter|3M Tint|Black Fangs|Black Rear Valance|JDM Fog Light| MY BAND-www.myspace.com/petroleum |
03-21-2010, 08:47 PM | #131 (permalink) |
A True Z Fanatic
Join Date: Apr 2009
Location: SC
Posts: 2,464
Drives: 370Z
Rep Power: 544 |
Yep. It's right underneath the jack tray by the driver's tail light. Here is a picture of the plug removed and the wires exposed. You can also see the grounding point in the upper left of the picture.
|
03-21-2010, 09:53 PM | #132 (permalink) |
A True Z Fanatic
Join Date: Nov 2008
Location: Orange County, CA.
Posts: 1,205
Drives: 370Z Tour, Spt, 6mt
Rep Power: 644 |
Thanks CB
Got it all hooked up, have a 4th brake light now I'll probably ad the relay to do the flashing and reverse, but I'm good for the moment.
__________________
370z Tour| Spt Pack|Navi|BERK CBE|Berk HFC's| Eibach Springs| Hotchkis Sway Bars|SPC Camber Arms|15mm Ichiba Wheel Spacers| 19"Factory Nismo Wheels-Matt Black|Stop Tech Rotors|TWM Shifter|3M Tint|Black Fangs|Black Rear Valance|JDM Fog Light| MY BAND-www.myspace.com/petroleum |
03-22-2010, 12:22 AM | #135 (permalink) |
A True Z Fanatic
Join Date: Nov 2008
Location: Orange County, CA.
Posts: 1,205
Drives: 370Z Tour, Spt, 6mt
Rep Power: 644 |
oooops!!
__________________
370z Tour| Spt Pack|Navi|BERK CBE|Berk HFC's| Eibach Springs| Hotchkis Sway Bars|SPC Camber Arms|15mm Ichiba Wheel Spacers| 19"Factory Nismo Wheels-Matt Black|Stop Tech Rotors|TWM Shifter|3M Tint|Black Fangs|Black Rear Valance|JDM Fog Light| MY BAND-www.myspace.com/petroleum |
Bookmarks |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Fog Lamp install with DIY harness question | wdkwang | Exterior & Interior | 10 | 03-02-2015 02:02 AM |
Install of Stillen G3 Intakes complete - review, etc. | semtex | Intake/Exhaust | 83 | 06-23-2010 01:19 PM |
Forged Performance: TEIN Flex Install 370Z Complete | Sharif@Forged | Brakes & Suspension | 37 | 02-19-2010 04:51 AM |
Install complete ( Finally ) Item list, Cost, Time | 355890 | Audio & Video | 11 | 06-29-2009 12:14 AM |