DIY: of complete FOG LAMP install

simota1

indeed it is lol

__________________

***TOP SECRET/POWERHOUSE AMUSE/ARC/DAYTONA RACING/VARIS/MINES/GANADOR/J-LINE/WORK EMOTION CR KAI/GT SPEC/CARBON SIGNAL/ZOOM ENGINEERING/ CARBON FIBER ELEMENT/STILLEN/***

Minicobra1

Ok, I got my light in, bolts were a pain, went down to Home depot and purchased a pen type Bernzomatic torch $7.95 and fluid $2.99. Heated them up for about 10 sec. and they came right off. Have to be careful not to go to long because I melted the housing a bit on one side.

I've decided to just do the 4th brake light for now, I have the factory harness going to the dummy box, can someone tell me what would be the easiest way to make this work? Should I just bypass that and go to the tail light "green" wires and then ground the black, or is it easier to tap in higher up by the trunk firewall ? I've read through the entire thread, but I'm still not clear what would be the best way to go about it. Like I said, I do have the wiring harness going to the dummy box, so................

thanks

__________________
370z Tour| Spt Pack|Navi|BERK CBE|Berk HFC's| Eibach Springs| Hotchkis Sway Bars|SPC Camber Arms|15mm Ichiba Wheel Spacers| 19"Factory Nismo Wheels-Matt Black|Stop Tech Rotors|TWM Shifter|3M Tint|Black Fangs|Black Rear Valance|JDM Fog Light| MY BAND-www.myspace.com/petroleum