03-02-2015, 06:16 AM
|
#26 (permalink)
|
|
Base Member
Join Date: Jan 2015
Location: Charlotte, NC
Posts: 15
Drives: 15 Nissan 370Z Sport
Rep Power: 11
|
Quote:
Originally Posted by Bluerings
I cannot get the factory dummy fog light thing out,the 2 nuts keep spinning with the studs,I am out of ideas,can anyone help me out with this???? Thanks....
|
Quote:
Originally Posted by scottIN
For those having issues with the bolt spinning / loctite, here's what I did: spray the nuts with some PB Blaster. Let it sit for about 30 seconds. Then take your 10mm and do a quick / hard turn on the nuts to break the (now softened) loctite. Both of mine spun right off doing this. Less than a minute to remove it.
I'd normally break loctite with a wrench / hammer combo, but I couldn't get a hammer in there. A quick turn should accomplish the same thing. The key is, you have to do this first, not after you've jacked with them and spun the head.
|
I personally haven't done this mod, but did a little research. Some have had to cut the nuts off with a Dremel tool as well.
|
|
|
Similar Threads
13Likes
Threaded Mode
