DIY: of complete FOG LAMP install

kekermahoney · 08-14-2009, 09:10 PM

blinking brake light.. that sounds neat-O.. I cant find the foglight on ebay tho-any suggestions?

simota1 · 08-15-2009, 04:35 AM

Quote:

Originally Posted by AJChubbs

Hi all, I'm going to go ahead and ask a stupid question here about the install. I recently got mine and just yesterday had the time to drop it in. Now the original black housing has wires and a gray plastic cap to that wiring that I left on. What do I do with that stuff and what do I do with the gray plastic part at the end of the wiring on my new lamp. For now I just installed the piece physically without attaching the wires. I seem to be lost from step 2 to after. Thanks and sorry for the idiotic question. Im a bit new at this.

no problem man.. since u got it installed u have to just wire up the fog lamp...

the gray peice on the black housing is im guessing for a real harness on the jdm models... but since we dont have that... u have to hard wire it to ur tail light harness....

BTW everyone i am sooooo sorry yes yes i know the wire color thing... ive been soooo slammed i cant take apart my taillights in time cuz im sooo tired i will get that hot wire color for the brake signal to all of u... soon i had a chance to do it once but my test light was broke... so i put back my panels thinking i wouldnt have to take it out again cuz i sealed them but low and behold.. the right one still leaks and moisture is in there.. i am sooo irritated by the freakin moisture...

and its such a pain in the *** to take out the panels...

will get it here hopefully tonight cuz im free sort of im just taking a break from work...

CBRich · 08-15-2009, 09:03 AM

You have moisture in your tail? Couldn't possibly be from this mod, this is all external, correct? What caused that?

simota1 · 08-15-2009, 07:53 PM

Quote:

Originally Posted by CBRich

You have moisture in your tail? Couldn't possibly be from this mod, this is all external, correct? What caused that?

its a factory defect im afraid... theres a bad seal on both my tail lights and ive tried sealing them like 4 times already havent gotten lucky yet... only got it to stop on the driver side taillight...

TLP · 08-27-2009, 06:41 PM

I'm a new 370Z owner (had it about 2 months) and am interested in installing the fog lamp with the module from flashingbrakelights.com . If anyone has done this, I'd really appreciate some instructions on how to hook up the wiring. A diagram would be great but pictures would be better.
Thanks

Mr_Z · 08-28-2009, 08:23 AM

I am working on it! I'll let you know if I'm successful. I have very few information about the wire colors so, so far, I only managed to burn the relay Ha ha ha! (Oh well, got to bring it to the dealer today...)

Quote:

Originally Posted by TLP

I'm a new 370Z owner (had it about 2 months) and am interested in installing the fog lamp with the module from flashingbrakelights.com . If anyone has done this, I'd really appreciate some instructions on how to hook up the wiring. A diagram would be great but pictures would be better.
Thanks

Shunya · 08-28-2009, 08:33 AM

Quote:

Originally Posted by simota1

its a factory defect im afraid... theres a bad seal on both my tail lights and ive tried sealing them like 4 times already havent gotten lucky yet... only got it to stop on the driver side taillight...

is it now?

simota1 · 08-28-2009, 11:00 AM

Quote:

Originally Posted by Shunya

is it now?

naw... the 5th time was the charm... a lil moisture is left over but itll disspaear after a while no worries!!! use to look like a rain forest in there...

Mr_Z · 09-01-2009, 09:48 AM

Quote:

Originally Posted by TLP

I'm a new 370Z owner (had it about 2 months) and am interested in installing the fog lamp with the module from flashingbrakelights.com . If anyone has done this, I'd really appreciate some instructions on how to hook up the wiring. A diagram would be great but pictures would be better.
Thanks

Hi,
I've sucessfuly finished the flashing brake light mod.

Some info:

- Red = Tail (Yes, confirmed by me)
- Green = Brakes (Yes, confirmed by me)
- Orange = Reverse (Yes, confirmed by Simota1)
- White = Turn signals (?)
- Black = Ground (You will also find a ground bolt not far from the tail light inside the trunk)

You need to tap into the tail lights (see color chart above), install a flashing module and manage to install a socket that supports a dual wire bulb (7443). The 7443 socket does not fit exactly as for the original 7440 socket (sigle wire) so you need to make some adjustments in order for it to become waterproof. In my case, I used an additional rubber ring and fixed it in place with a tie-rap.

On thing though, the flashing module from flashingbrakelights.com behaves in a strange way on my setup. If the car is not started, it will flash and reset after 8 sec (normal behaviour). If the car is running, it wil not completely reset until you haven't touched the brakes for about 45sec. Very strange and I can't explain it! After 15 sec, it will flash once or twice. After 30 sec, it will flash 3-4 times. After 45 sec it will flash 4 or 5 times. I have tested it with LED and regular bulbs... the same. So if you have an idea why, I would like to hear it!

simota1 · 09-01-2009, 12:59 PM

nice one man!!!

dcrew1x · 09-01-2009, 06:36 PM

Simota,

I was wondering if you knew how to wire the fog lamp kit so that I can just turn it on/off with a switch. (I purchased a touring package heated seat switch to use for this)

I'm a noob at this. Would I need more wiring, parts, etc or would the fog lamp and seat switch be enough?

simota1 · 09-01-2009, 07:07 PM

Quote:

Originally Posted by dcrew1x

Simota,

I was wondering if you knew how to wire the fog lamp kit so that I can just turn it on/off with a switch. (I purchased a touring package heated seat switch to use for this)

I'm a noob at this. Would I need more wiring, parts, etc or would the fog lamp and seat switch be enough?

sup man... naw that heated switch is good enough... all u need is long wires... tap a acc wire... so when u switch on ur car ther is power in that wire.... run it to the switch and run it back to the fog lamp.... connect that wire to the red wire of the fog and jus ground the other black wire... and ur done

dcrew1x · 09-01-2009, 07:35 PM

sweet man thanks. +1

simota1 · 09-02-2009, 04:17 AM

ur welcome man

anytime...

thezmonster · 09-02-2009, 07:00 PM

I actually found the stock harness for the 370z so u dont have to wire it up you just plug it and thats it Need more info hit me up

09-01-2009, 12:59 PM	#40 (permalink)
simota1 A True Z Fanatic Join Date: May 2009 Location: Dededo, Guam Posts: 6,642 Drives: solid red 370z 6mt Rep Power: 406	nice one man!!! __________________ *TOP SECRET/POWERHOUSE AMUSE/ARC/DAYTONA RACING/VARIS/MINES/GANADOR/J-LINE/WORK EMOTION CR KAI/GT SPEC/CARBON SIGNAL/ZOOM ENGINEERING/ CARBON FIBER ELEMENT/STILLEN/*

09-02-2009, 04:17 AM	#44 (permalink)
simota1 A True Z Fanatic Join Date: May 2009 Location: Dededo, Guam Posts: 6,642 Drives: solid red 370z 6mt Rep Power: 406	ur welcome man anytime... __________________ *TOP SECRET/POWERHOUSE AMUSE/ARC/DAYTONA RACING/VARIS/MINES/GANADOR/J-LINE/WORK EMOTION CR KAI/GT SPEC/CARBON SIGNAL/ZOOM ENGINEERING/ CARBON FIBER ELEMENT/STILLEN/*

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Fog Lamp install with DIY harness question	wdkwang	Exterior & Interior	10	03-02-2015 01:02 AM
Install of Stillen G3 Intakes complete - review, etc.	semtex	Intake/Exhaust	83	06-23-2010 12:19 PM
Forged Performance: TEIN Flex Install 370Z Complete	Sharif@Forged	Brakes & Suspension	37	02-19-2010 03:51 AM
Install complete ( Finally ) Item list, Cost, Time	355890	Audio & Video	11	06-28-2009 11:14 PM

08-14-2009, 09:10 PM	#31 (permalink)
kekermahoney Base Member Join Date: Jul 2009 Location: NJ Posts: 57 Drives: 370z sport 6spd Rep Power: 16	blinking brake light.. that sounds neat-O.. I cant find the foglight on ebay tho-any suggestions?

08-15-2009, 09:03 AM	#33 (permalink)
CBRich A True Z Fanatic Join Date: Apr 2009 Location: SC Posts: 2,464 Drives: 370Z Rep Power: 545	You have moisture in your tail? Couldn't possibly be from this mod, this is all external, correct? What caused that?

08-27-2009, 06:41 PM	#35 (permalink)
TLP Base Member Join Date: Aug 2009 Location: Memphis Posts: 2 Drives: 09 370Z black manual Rep Power: 16	I'm a new 370Z owner (had it about 2 months) and am interested in installing the fog lamp with the module from flashingbrakelights.com . If anyone has done this, I'd really appreciate some instructions on how to hook up the wiring. A diagram would be great but pictures would be better. Thanks

09-01-2009, 06:36 PM	#41 (permalink)
dcrew1x Track Member Join Date: Jun 2009 Location: SoCal Posts: 821 Drives: Graphite Bullet Rep Power: 369	Simota, I was wondering if you knew how to wire the fog lamp kit so that I can just turn it on/off with a switch. (I purchased a touring package heated seat switch to use for this) I'm a noob at this. Would I need more wiring, parts, etc or would the fog lamp and seat switch be enough?

09-01-2009, 07:35 PM	#43 (permalink)
dcrew1x Track Member Join Date: Jun 2009 Location: SoCal Posts: 821 Drives: Graphite Bullet Rep Power: 369	sweet man thanks. +1

09-02-2009, 07:00 PM	#45 (permalink)
thezmonster Base Member Join Date: Aug 2009 Location: Charlotte Posts: 221 Drives: 09 Nissan 370z CB M6 Rep Power: 16	I actually found the stock harness for the 370z so u dont have to wire it up you just plug it and thats it Need more info hit me up