DIY: of complete FOG LAMP install

martin82 · 02-21-2012, 11:04 AM

Pat, if you get the Evo R fog light it is very easy to install and wire up. You do no need a switch in the console if you only want flashing reverse and brake light. You will just tap into the driver's side tail light wiring. There is a grommet once you remove the plastic covers in the trunk that you will be able to tap easily. It is just 2 wires, and 1 ground. 1 to trigger the reverse flashing and the 2nd for brake light. The DIY tells you exactly what color wires you need, then just ground it, there is a grounding bolt right by there also

Forgot to mention, you do not need to remove the bumper, taillight or anything like that. Just jack up the car a bit will make it easier to work on removing the fog assembly etc.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Fog Lamp install with DIY harness question	wdkwang	Exterior & Interior	10	03-02-2015 01:02 AM
Install of Stillen G3 Intakes complete - review, etc.	semtex	Intake/Exhaust	83	06-23-2010 12:19 PM
Forged Performance: TEIN Flex Install 370Z Complete	Sharif@Forged	Brakes & Suspension	37	02-19-2010 03:51 AM
Install complete ( Finally ) Item list, Cost, Time	355890	Audio & Video	11	06-28-2009 11:14 PM

02-21-2012, 11:04 AM	#11 (permalink)
martin82 A True Z Fanatic Join Date: Nov 2011 Location: los angeles Posts: 2,636 Drives: 12 Nissan 370Z MB M6 Rep Power: 20	Pat, if you get the Evo R fog light it is very easy to install and wire up. You do no need a switch in the console if you only want flashing reverse and brake light. You will just tap into the driver's side tail light wiring. There is a grommet once you remove the plastic covers in the trunk that you will be able to tap easily. It is just 2 wires, and 1 ground. 1 to trigger the reverse flashing and the 2nd for brake light. The DIY tells you exactly what color wires you need, then just ground it, there is a grounding bolt right by there also Forgot to mention, you do not need to remove the bumper, taillight or anything like that. Just jack up the car a bit will make it easier to work on removing the fog assembly etc.