DIY: LED Halo w/Video's

nandosman · 08-24-2018, 06:59 AM

Quote:

Originally Posted by R1talin

Finished painting/assembling and testing all the lights...hope to get everything wired up this weekend
Attachment 131304

Attachment 131305

Attachment 131306

Attachment 131307

Attachment 131308

Attachment 131309

Attachment 131310

Attachment 131311

The paint looks so clean and smooth, how did you do it? Mine looks grainy and messy

R1talin · 08-24-2018, 08:40 AM

Quote:

Originally Posted by l2iceman

Looking good! Regarding the sma projector for the turn signal, I thought people stopped doing this because having a projector there caused it to magnify sunlight heat and cause paint to bubble in front. Or was that due to bad prep work?

Sent from my SM-N920W8 using Tapatalk

Thanks, not sure about the paint bubbling....if i have any issues with it ill post up.

R1talin · 08-24-2018, 08:46 AM

Quote:

Originally Posted by nandosman

The paint looks so clean and smooth, how did you do it? Mine looks grainy and messy

i've been painting for a few years now but didn't have the time/room to spray theses pieces so i took the six pieced down the road to the local body shop and they sprayed them for $50.

R1talin · 09-01-2018, 03:40 PM

So I've run into a few issues (not that they are bad, but they are issues) with this project that have triggered my OCD and decided I'd throw them out there so anyone considering this is aware or for anyone that has went through it knows I feel their pain.... and for those that have looked at this thread said to yourself “why would you do that?”....can crack a cold one and enjoy my pain...

so for a recap I decided to install Morimoto XBT halos on the upper and lower headlight shrouds (along with retrofitting a projector lens to the upper housing), Morimoto XBT demon eyes and Morimoto zoomerangs and since I had the front end off, wire my fog lights to a switch properly....

#1 Zoomerangs are awesome but they are crazy super bright! So I decided to wire them to a switch so I can control when they are on/off but wire them into the turn signals so they will operate as turn signals at all times...but for the white on/off I want that wired to a switch.

#2 Similar to above I want to be able to control the halos independently with a switch and not have to rely on the key fob being in the car/ignition and the car on in accessory mode or any mode that would require that, so wire them to a switch as well and they will operate as turn signals at all times.

To provide for the above I've decided, the best way to do so is to build a separate relay/fuse block to control the the fog lights/halos/Zoomerangs independently of the car being powered on....as long as the switch is pushed on for the fog/halo/zoom it will be on.

In testing everything has proven out.....

so the last week has been spent hooking up everything the way I want it to work and proving it out. I stared all the final wiring this weekend and hope to be done by Monday.

Here are a few pics.....

where to punch through the firewall into the cabin:
IMG_8342 (Large).JPG

secondary to the pic above, where the wire come thru on the floor:
IMG_8331 (Large).JPG

Switch wires all soldered and shrink-wrapped.... soldering is so satisfying

IMG_8332 (Large).JPG
Fuse block built to take power in from the battery, thru the fuse to the relay to provide power between the switch and the accessory (fog/halo/zoom)
IMG_8329 (Large).JPG
switches after being installed in the blanks and about to be put together......Thanks Nissan!
IMG_8344 (Large).JPG

nandosman · 09-01-2018, 11:09 PM

That is some crazy wiring. You are doing exactly the same thing I'm doing, with the same exact components and at the same time too. But the fuse box is one step ahead of me.

nandosman · 09-02-2018, 09:59 PM

Finished mine today. Noticed that my turn signals are going super fast now, some people say it is because the resistance on the new turn signal LEDs is lower than OEM.

Does any one have a link to turn signal LED bulbs that are low profile and same resistance as OEM?

R1talin · 09-03-2018, 01:21 PM

Looks great man!

as far as low profile hereare the ones i purchased as I ran into the same issue. Your not gonna find a halogen that matches the color so your going to need to wire in a set of resistors with the led bulbs to stop the hyper flash. Bottom line is with all the work you've already done, wiring in the resistors will be a walk in the park.

low profile turn signals:
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1

resistors:
if you google a 50w 60ohm resistor you will find tons. That's what i have used and they work, im sure there are other options out there.

nandosman · 09-04-2018, 03:25 AM

Ended using load resistors as suggested. I just really didn't want to take that bumper off again, but luckily I was able to do it without taking it off. It's working great now.

Also here is the full album of pictures I took during the whole project, for anyone interested. Several pictures included:

https://photos.app.goo.gl/BMJ6N92uL4G4APcu6

Genosphere · 09-10-2018, 10:23 PM

Quote:

Originally Posted by l2iceman

Looking good! Regarding the sma projector for the turn signal, I thought people stopped doing this because having a projector there caused it to magnify sunlight heat and cause paint to bubble in front. Or was that due to bad prep work?

Sent from my SM-N920W8 using Tapatalk

Ya that is an issue and after sitting in the sun a little to much i got some melting/warping of the paint just below the projector. If i were to move it back a little more i think i could of prevented it. I though of wrapped the plastic just under it with either a clear piece or matching color to get around it. May do so if i take them apart again, or just wrap the whole damn thing.

Either way the headlight themselves are functioning grate, minus the morimoto demon eyes. I either missed the opening in the housing just by a few mm or the opening does not let enough light through.

If anyone wired a switch to manually turn them on or off via switch inside the cabin, let me know how and where you ran the +/- line to whereever inside the cabin.

l2iceman · 10-09-2018, 08:01 AM

Loving the diode dynamics halos, very bright!

Sent from my SM-N920W8 using Tapatalk

R1talin · 10-09-2018, 04:58 PM

Quote:

Originally Posted by l2iceman

Loving the diode dynamics halos, very bright!

Love the license plate!

hwrtn · 10-11-2018, 10:22 AM

Quick question guys, is it okay to tap the Z-boomerang into the headlight leveler? for it to act as a DRl?

nandosman · 10-11-2018, 03:01 PM

Quote:

Originally Posted by hwrtn

Quick question guys, is it okay to tap the Z-boomerang into the headlight leveler? for it to act as a DRl?

What is a headlight leveler?

Genosphere · 10-30-2018, 04:18 PM

Quote:

Originally Posted by nandosman

What is a headlight leveler?

Basically a manual knob or automated motor that's levels the cars headlights to a desired angle. I cant find any pics online.

Its the two knobs at the top above the big gray cap, top left is silver the top right is covered by a black cage looking thing I believe.

nandosman · 10-30-2018, 05:29 PM

Quote:

Originally Posted by Genosphere

Basically a manual knob or automated motor that's levels the cars headlights to a desired angle. I cant find any pics online.

Its the two knobs at the top above the big gray cap, top left is silver the top right is covered by a black cage looking thing I believe.

Yeah but I don't think that's what he's talking about, he says he wants to tap the Zoomerangs into the headlight levelers???? Doesn't make sense to me

09-01-2018, 03:40 PM	#679 (permalink)
R1talin Base Member Join Date: Mar 2017 Location: FL - Florida Posts: 60 Drives: 16 370z Nismo 6MT Rep Power: 6718	So I've run into a few issues (not that they are bad, but they are issues) with this project that have triggered my OCD and decided I'd throw them out there so anyone considering this is aware or for anyone that has went through it knows I feel their pain.... and for those that have looked at this thread said to yourself “why would you do that?”....can crack a cold one and enjoy my pain... so for a recap I decided to install Morimoto XBT halos on the upper and lower headlight shrouds (along with retrofitting a projector lens to the upper housing), Morimoto XBT demon eyes and Morimoto zoomerangs and since I had the front end off, wire my fog lights to a switch properly.... #1 Zoomerangs are awesome but they are crazy super bright! So I decided to wire them to a switch so I can control when they are on/off but wire them into the turn signals so they will operate as turn signals at all times...but for the white on/off I want that wired to a switch. #2 Similar to above I want to be able to control the halos independently with a switch and not have to rely on the key fob being in the car/ignition and the car on in accessory mode or any mode that would require that, so wire them to a switch as well and they will operate as turn signals at all times. To provide for the above I've decided, the best way to do so is to build a separate relay/fuse block to control the the fog lights/halos/Zoomerangs independently of the car being powered on....as long as the switch is pushed on for the fog/halo/zoom it will be on. In testing everything has proven out..... so the last week has been spent hooking up everything the way I want it to work and proving it out. I stared all the final wiring this weekend and hope to be done by Monday. Here are a few pics..... where to punch through the firewall into the cabin: IMG_8342 (Large).JPG secondary to the pic above, where the wire come thru on the floor: IMG_8331 (Large).JPG Switch wires all soldered and shrink-wrapped.... soldering is so satisfying IMG_8332 (Large).JPG Fuse block built to take power in from the battery, thru the fuse to the relay to provide power between the switch and the accessory (fog/halo/zoom) IMG_8329 (Large).JPG switches after being installed in the blanks and about to be put together......Thanks Nissan! IMG_8344 (Large).JPG Krylon likes this.

09-01-2018, 11:09 PM	#680 (permalink)
nandosman Enthusiast Member Join Date: Mar 2017 Location: IL, US Posts: 344 Drives: 2014 370Z T/S Rep Power: 8	That is some crazy wiring. You are doing exactly the same thing I'm doing, with the same exact components and at the same time too. But the fuse box is one step ahead of me. R1talin likes this. __________________ FI Non-Res Test Pipes \| FI 18" Res CBE \| Stillen Gen 3 CAI \| Dynotuned @ Dynosty EcuTek 325 whp

09-02-2018, 09:59 PM	#681 (permalink)
nandosman Enthusiast Member Join Date: Mar 2017 Location: IL, US Posts: 344 Drives: 2014 370Z T/S Rep Power: 8	Finished mine today. Noticed that my turn signals are going super fast now, some people say it is because the resistance on the new turn signal LEDs is lower than OEM. Does any one have a link to turn signal LED bulbs that are low profile and same resistance as OEM? __________________ FI Non-Res Test Pipes \| FI 18" Res CBE \| Stillen Gen 3 CAI \| Dynotuned @ Dynosty EcuTek 325 whp

09-03-2018, 01:21 PM	#682 (permalink)
R1talin Base Member Join Date: Mar 2017 Location: FL - Florida Posts: 60 Drives: 16 370z Nismo 6MT Rep Power: 6718	Looks great man! as far as low profile hereare the ones i purchased as I ran into the same issue. Your not gonna find a halogen that matches the color so your going to need to wire in a set of resistors with the led bulbs to stop the hyper flash. Bottom line is with all the work you've already done, wiring in the resistors will be a walk in the park. low profile turn signals: https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1 resistors: if you google a 50w 60ohm resistor you will find tons. That's what i have used and they work, im sure there are other options out there. Last edited by R1talin; 09-03-2018 at 01:22 PM. Reason: spelling

09-04-2018, 03:25 AM	#683 (permalink)
nandosman Enthusiast Member Join Date: Mar 2017 Location: IL, US Posts: 344 Drives: 2014 370Z T/S Rep Power: 8	Ended using load resistors as suggested. I just really didn't want to take that bumper off again, but luckily I was able to do it without taking it off. It's working great now. Also here is the full album of pictures I took during the whole project, for anyone interested. Several pictures included: https://photos.app.goo.gl/BMJ6N92uL4G4APcu6 __________________ FI Non-Res Test Pipes \| FI 18" Res CBE \| Stillen Gen 3 CAI \| Dynotuned @ Dynosty EcuTek 325 whp

10-09-2018, 08:01 AM	#685 (permalink)
l2iceman Base Member Join Date: Oct 2014 Location: Toronto, Canada Posts: 126 Drives: '10 370z Rep Power: 240	Loving the diode dynamics halos, very bright! Sent from my SM-N920W8 using Tapatalk R1talin likes this.

10-11-2018, 10:22 AM	#687 (permalink)
hwrtn Base Member Join Date: Jan 2018 Location: Western Australia Posts: 1 Drives: 2011 370z grey auto Rep Power: 8	Quick question guys, is it okay to tap the Z-boomerang into the headlight leveler? for it to act as a DRl?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Halo kit	rikkiphan1506	Exterior & Interior	3	02-01-2013 12:31 AM
Halo 4	The Dimer	The Lounge (Off Topic)	6	03-05-2012 04:41 PM
Z elininator drag Video's	Z eliminator	Canada	0	08-15-2010 04:41 PM
How To detailing video's	Kyle@STILLEN	Detailing / Washing / Waxing / Cosmetic Maintenance and Repair	2	03-02-2010 01:07 AM
Video's of the new arrival?	Shortbus	Nissan 370Z General Discussions	1	01-04-2009 06:14 PM