DIY: LED Halo w/Video's

Nut_N_Much · 07-09-2013, 09:17 AM

Nice, you got SKILL's ...

Looks very clean.

VDC_OFF · 07-15-2013, 02:36 PM

very smart, I usually have to shave the inside of the shroud very thin but not sure why I didnt think of this. I wonder if that voids the warranty anyway?

Nut_N_Much · 07-29-2013, 07:10 PM

Update,
I was talking with LightWurks CEO trying to get them to have there supplier build a 90mm halo for us and sell in a kit or as a set. This new set would fit inside the shroud for a nice clean look just like the XB's. No luck, have not herd back from them.

So the only enclosed Halo sold today that fits inside that main projector shroud is from 180 Customs for $320.00 for 2 halo's.

I think I will stick with the XB's from RetroFitSource.com Morimoto xbALed Angel Eyes - Accessories from The Retrofit Source Inc Helps to have fair prices.

paperboy42190 · 08-04-2013, 01:44 AM

the morimoto xb isn't necessary an "older" model, its just an older model sold by retrofitsource. There is a local shop near my house that just started selling the "older" morimoto xB halos, but of course its not called "morimoto xB" but its the exact same product. If you guys are interested in purchasing those PM me for the name of the shop that sells them.

paperboy42190 · 08-04-2013, 01:47 AM

Quote:

Originally Posted by Nut_N_Much

60mm is to small, the Halo's wont match up with the trimmed shroud. I when you center it you will have an exposed lip behind the halo.

you sure about that? I always thought that the 70mm was too big and required trimming the housing, so I went ahead and tried 60mm. No need to trim the housing which I felt like was a huge plus. Here are the results:

Mr&Mrs · 08-04-2013, 07:20 AM

The way you done it looks like you left some of the plastic blinker cover. I do not think the smaller will fit/fill the housing as well as the larger size. Mine fit flush with the housing so no need to trim the factory blinker cover and it looks way better than that. I would rather trim the housing for it to sit flush than stick out.

Nut_N_Much · 08-04-2013, 08:32 AM

When I built the DIY I was going for a flush mount. Your 60mm looks really clean but being pushed out a 1/4 of an inch leaves a void between the g35 lens and the back of the Halo.

You have another way of doing it, congrats. Looks real clean, I likes the halo sitting flush but thats just me. It still looks great and way better that the stock look..

paperboy42190 · 08-05-2013, 03:26 AM

well, I've actually installed like 6-7 sets of headlights with the 70mm, that was my first attempt with the 60mm. I wanted to shave down the blinker cover more but as you guys know the base would also get bigger and the halo wouldnt fill it properly. I think it looks fine though, I have another set of headlights to do in couple weeks so I'll shave it down a little more and see whats the max before the halo starts looking too small

VDC_OFF · 08-06-2013, 12:56 PM

I was wondering how a 60 would look, props for trying it. My concern is how the wires are hidden. You can see them in the pics but how do they look from the front?

paperboy42190 · 08-07-2013, 01:16 AM

well since the halo is slightly smaller, there really isnt a place for the wires to FULLY hide. If you look for the wire, it'll be there on the bottom, but as long as you're not staring at the headlight looking for it you will not be able to see it

Nut_N_Much · 08-10-2013, 08:40 PM

New set... XB's from RetroFitSource..

Customer wanted to keep the chrome and just darken up the shrouds.. Came out nice, had to re-open one light tho, I tried a new wire connection and it failed. I will always solder..

.

SharkBite · 08-12-2013, 12:05 PM

Finishing the splice on the last one!
I found tons of difficulty trying to get it open at first, but it gradually got easier. If you don't have an oven, you can use either a butane torch or a heat gun. I had the luxury of both, and honestly, I set my heat gun to 1000 and just held it there for roughly 2 seconds over every spot, and to compensate for the 3000 degrees on the torch, I just lightly did it over with the torch. Found the heat gun to take about 5-10 minutes, and maybe 15 on the torch.

I then sealed it over with flow-able silicone. It's looking really good so far, and all I have left is to splice the second ring in. I don't have a word on whether or not the silicone comes off with heat, but I'm hoping I don't have to find out!

Will post pics once finished, one light re-installed working as intended.

Edit: Wiring is very easy. Have no experience, still spliced in. No solder yet though, because I think I may wait until I can wire fog lights.

Meulen · 08-19-2013, 05:02 PM

If I wanted to go with red halo's, what's the consensus on which ones to get?

I really want to try this! I'm going to attempt this over the winter with the help of my neighbor who owns a shop here in Chicago. Can't wait to see how this turns out on my 40th!

Nut_N_Much · 08-23-2013, 05:54 PM

Quote:

Originally Posted by Meulen

If I wanted to go with red halo's, what's the consensus on which ones to get?

I really want to try this! I'm going to attempt this over the winter with the help of my neighbor who owns a shop here in Chicago. Can't wait to see how this turns out on my 40th!

Putting a set of these in right now, they are red and use the same resistors as the XB's. They are white and resin sealed. When I get done tomorrow I'll post a pick of them..

I have had a set of COB's on my car for 2 years now with no issues. But I am switching to XB's (not in red).

You will want to wire them to a switch some were. Johny Law

will give you a ticket driving around with red halos on.

LED Angel Eye Headlight Accent Lights - COB | LED Angel Eyes | Accent Lighting | Super Bright LEDs

paperboy42190 · 08-27-2013, 12:57 AM

what do you guys think about this? 60mm halo, but with the clear part painted

07-09-2013, 09:17 AM	#316 (permalink)
Nut_N_Much A True Z Fanatic Join Date: Dec 2011 Location: Pensacola Florida Posts: 1,696 Drives: Awesome Car Rep Power: 26	Nice, you got SKILL's ... Looks very clean. __________________ Did new cool science stuff to the car !!! http://www.the370z.com/mazoc/99606-z...y-14-17-a.html http://www.the370z.com/diy-section-d...-w-videos.html

07-15-2013, 02:36 PM	#317 (permalink)
VDC_OFF A True Z Fanatic Join Date: Aug 2011 Location: Houston (Pearland) Age: 44 Posts: 1,205 Drives: 2011 370Z M6 Rep Power: 17	very smart, I usually have to shave the inside of the shroud very thin but not sure why I didnt think of this. I wonder if that voids the warranty anyway? __________________ DRIFTING JOURNAL \| Follow me on Instagram \| Facebook \| Houston Halos

07-29-2013, 07:10 PM	#318 (permalink)
Nut_N_Much A True Z Fanatic Join Date: Dec 2011 Location: Pensacola Florida Posts: 1,696 Drives: Awesome Car Rep Power: 26	Update, I was talking with LightWurks CEO trying to get them to have there supplier build a 90mm halo for us and sell in a kit or as a set. This new set would fit inside the shroud for a nice clean look just like the XB's. No luck, have not herd back from them. So the only enclosed Halo sold today that fits inside that main projector shroud is from 180 Customs for $320.00 for 2 halo's. I think I will stick with the XB's from RetroFitSource.com Morimoto xbALed Angel Eyes - Accessories from The Retrofit Source Inc Helps to have fair prices. __________________ Did new cool science stuff to the car !!! http://www.the370z.com/mazoc/99606-z...y-14-17-a.html http://www.the370z.com/diy-section-d...-w-videos.html

08-04-2013, 07:20 AM	#321 (permalink)
Mr&Mrs A True Z Fanatic Join Date: May 2010 Location: Tampa Posts: 4,207 Drives: RZ34 Rep Power: 31940	The way you done it looks like you left some of the plastic blinker cover. I do not think the smaller will fit/fill the housing as well as the larger size. Mine fit flush with the housing so no need to trim the factory blinker cover and it looks way better than that. I would rather trim the housing for it to sit flush than stick out. Nut_N_Much likes this. __________________ Project Z <--Click - Check out the link too many mods to list! Last edited by Mr&Mrs; 08-04-2013 at 07:24 AM.

08-04-2013, 08:32 AM	#322 (permalink)
Nut_N_Much A True Z Fanatic Join Date: Dec 2011 Location: Pensacola Florida Posts: 1,696 Drives: Awesome Car Rep Power: 26	When I built the DIY I was going for a flush mount. Your 60mm looks really clean but being pushed out a 1/4 of an inch leaves a void between the g35 lens and the back of the Halo. You have another way of doing it, congrats. Looks real clean, I likes the halo sitting flush but thats just me. It still looks great and way better that the stock look.. VDC_OFF likes this. __________________ Did new cool science stuff to the car !!! http://www.the370z.com/mazoc/99606-z...y-14-17-a.html http://www.the370z.com/diy-section-d...-w-videos.html

08-04-2013, 01:44 AM	#319 (permalink)
paperboy42190 Base Member Join Date: Sep 2011 Location: Alhambra, CA Posts: 193 Drives: 2007 Acura TL Type-S Rep Power: 14	the morimoto xb isn't necessary an "older" model, its just an older model sold by retrofitsource. There is a local shop near my house that just started selling the "older" morimoto xB halos, but of course its not called "morimoto xB" but its the exact same product. If you guys are interested in purchasing those PM me for the name of the shop that sells them.

08-05-2013, 03:26 AM	#323 (permalink)
paperboy42190 Base Member Join Date: Sep 2011 Location: Alhambra, CA Posts: 193 Drives: 2007 Acura TL Type-S Rep Power: 14	well, I've actually installed like 6-7 sets of headlights with the 70mm, that was my first attempt with the 60mm. I wanted to shave down the blinker cover more but as you guys know the base would also get bigger and the halo wouldnt fill it properly. I think it looks fine though, I have another set of headlights to do in couple weeks so I'll shave it down a little more and see whats the max before the halo starts looking too small Mr&Mrs likes this.

08-06-2013, 12:56 PM	#324 (permalink)
VDC_OFF A True Z Fanatic Join Date: Aug 2011 Location: Houston (Pearland) Age: 44 Posts: 1,205 Drives: 2011 370Z M6 Rep Power: 17	I was wondering how a 60 would look, props for trying it. My concern is how the wires are hidden. You can see them in the pics but how do they look from the front? __________________ DRIFTING JOURNAL \| Follow me on Instagram \| Facebook \| Houston Halos

08-07-2013, 01:16 AM	#325 (permalink)
paperboy42190 Base Member Join Date: Sep 2011 Location: Alhambra, CA Posts: 193 Drives: 2007 Acura TL Type-S Rep Power: 14	well since the halo is slightly smaller, there really isnt a place for the wires to FULLY hide. If you look for the wire, it'll be there on the bottom, but as long as you're not staring at the headlight looking for it you will not be able to see it

08-12-2013, 12:05 PM	#327 (permalink)
SharkBite Base Member Join Date: Apr 2013 Location: Alamo Posts: 24 Drives: '09 370z Coupe Rep Power: 12	Finishing the splice on the last one! I found tons of difficulty trying to get it open at first, but it gradually got easier. If you don't have an oven, you can use either a butane torch or a heat gun. I had the luxury of both, and honestly, I set my heat gun to 1000 and just held it there for roughly 2 seconds over every spot, and to compensate for the 3000 degrees on the torch, I just lightly did it over with the torch. Found the heat gun to take about 5-10 minutes, and maybe 15 on the torch. I then sealed it over with flow-able silicone. It's looking really good so far, and all I have left is to splice the second ring in. I don't have a word on whether or not the silicone comes off with heat, but I'm hoping I don't have to find out! Will post pics once finished, one light re-installed working as intended. Edit: Wiring is very easy. Have no experience, still spliced in. No solder yet though, because I think I may wait until I can wire fog lights. Nut_N_Much likes this. __________________ 09 6MT T/S Takeda Long Tube, FI Non-Res Y-Pipe, ARK Exhaust Knockoff, K&W V1 Coils, Nismo Rear, Stillen Sides/Front, Enkei RPF1 Last edited by SharkBite; 08-12-2013 at 12:10 PM.

08-19-2013, 05:02 PM	#328 (permalink)
Meulen A True Z Fanatic Join Date: Aug 2013 Location: Romeoville, IL Posts: 1,093 Drives: 2010 370z 40th Rep Power: 3390	If I wanted to go with red halo's, what's the consensus on which ones to get? I really want to try this! I'm going to attempt this over the winter with the help of my neighbor who owns a shop here in Chicago. Can't wait to see how this turns out on my 40th!

08-27-2013, 12:57 AM	#330 (permalink)
paperboy42190 Base Member Join Date: Sep 2011 Location: Alhambra, CA Posts: 193 Drives: 2007 Acura TL Type-S Rep Power: 14	what do you guys think about this? 60mm halo, but with the clear part painted Nut_N_Much likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Halo kit	rikkiphan1506	Exterior & Interior	3	02-01-2013 12:31 AM
Halo 4	The Dimer	The Lounge (Off Topic)	6	03-05-2012 04:41 PM
Z elininator drag Video's	Z eliminator	Canada	0	08-15-2010 04:41 PM
How To detailing video's	Kyle@STILLEN	Detailing / Washing / Waxing / Cosmetic Maintenance and Repair	2	03-02-2010 01:07 AM
Video's of the new arrival?	Shortbus	Nissan 370Z General Discussions	1	01-04-2009 06:14 PM