DIY: LED Halo w/Video's

Nut_N_Much · 10-13-2012, 09:46 AM

Quote:

Originally Posted by paperboy42190

did another set:

Nice Job, really clean...

Quote:

djtodd Amazing DIY and the results are fantastic.
One question, as a sanity check:
For the main projector halos, is that 90mm?
Haven't taken mine apart to measure, so wanted to be sure.
Thanks again!

Yes sir,
90mm for the main, 70mm for the turn signal/G35 lens mod. The 70mm are the hard ones to get for some reason. But the 90mm is a common size, shouldn't have any issues getting them.

Thanks for the props on the DIY, post your pics of you mods for all to see, any wiring ideas that work, and different set ups, materials etc. lets keep the thread going. You guy's are awesome !!!!!

Joe

Nut_N_Much · 10-14-2012, 01:58 PM

New Project...

Pulling out Ironman and Landing Strips, installing Dual Halo's, and G35 lenses leaving in the Demon

Eyes:

Took 15 min per light to get them opened, made quick video using the box and a heat gun..

https://www.youtube.com/watch?v=PaXz...ure=plpp_video

Nissan 370Z Forum - Nut_N_Much's Album: New Set to Fix

Mr&Mrs · 10-14-2012, 02:15 PM

Sweet

Thanks again!

Quote:

Originally Posted by Nut_N_Much

New Project...

Pulling out Ironman and Landing Strips, installing Dual Halo's, and G35 lenses leaving in the Demon

Eyes:

Took 15 min per light to get them opened, made quick video using the box and a heat gun..

https://www.youtube.com/watch?v=PaXz...ure=plpp_video

Nissan 370Z Forum - Nut_N_Much's Album: New Set to Fix

Nut_N_Much · 10-21-2012, 11:12 AM

Quote:

Originally Posted by paperboy42190

did another set:

I have looked everywhere for those halos. If you don't mind me asking who makes them?

I have to cut out 1/4 inch to get mine to fit into the shroud like that.. Nice clean look.. Thanks brother..

paperboy42190 · 10-22-2012, 02:08 PM

Quote:

Originally Posted by Nut_N_Much

I have looked everywhere for those halos. If you don't mind me asking who makes them?

I have to cut out 1/4 inch to get mine to fit into the shroud like that.. Nice clean look.. Thanks brother..

I got them from theretrofitsource. its the morimoto xB LED angel eyes

Mr&Mrs · 10-22-2012, 02:10 PM

Dang thats where I ordered some of my stuff from, wish I would of known sooner!

Quote:

Originally Posted by paperboy42190

I got them from theretrofitsource. its the morimoto xB LED angel eyes

Nut_N_Much · 10-24-2012, 01:04 PM

Already got you covered. They will be here tomorrow. Yours ill use on my rebuild.

Mr&Mrs · 10-11-2012, 08:01 PM

Those look awesome nice job!

Huan'z · 10-12-2012, 09:03 AM

I live in Houston Texas. Anyone can help me out to do this mod?

Sent from my iPhone using Tapatalk

anhdat503 · 10-14-2012, 08:06 PM

thnk alot

djtodd · 10-17-2012, 11:24 AM

So, how's the vinyl on the projector housings holding up?
Would really like to do something similar, just concerned about the heat cycles.

Thanks!

Nut_N_Much · 10-18-2012, 07:01 PM

Quote:

Originally Posted by djtodd

So, how's the vinyl on the projector housings holding up?
Would really like to do something similar, just concerned about the heat cycles.

Thanks!

Its holding good. No fading or peal back. When I wrapped the shrouds I glued the back side. So far hold up perfect.. The halo that I used the epoxy on is loose. The side I used Car Goop is perfect..

Just take your time with the wrap. You might not get the hole thing in one shot. But its not hard at all..

Joe

Tward · 11-04-2012, 08:09 PM

Great stuff in this thread.
I have a question about what to do if I have seen moisture in one of my headlights. I didnt seal up my drivers side headlight completely and have noticed moisture in side at times of heavy rain, not much but a little condensation. Could i try to heat up the headlight and press it back together and see if that does the trick?

Nut_N_Much · 11-06-2012, 07:24 PM

Quote:

Originally Posted by Tward

Great stuff in this thread.
I have a question about what to do if I have seen moisture in one of my headlights. I didnt seal up my drivers side headlight completely and have noticed moisture in side at times of heavy rain, not much but a little condensation. Could i try to heat up the headlight and press it back together and see if that does the trick?

I would warm the light up, crack the seal and pull it apart. Order some of this:OCI Butyl Rubber Glue - Accessories from The Retrofit Source Inc
You really don't need much but stretch it out and stuff a string of it in the groves. Then warm back up and re-seal. Only way to make sure the seal is good and it doesn't happen again.

Easy way, crack the seal, run blow dryer in the light and close it up. Temp fix doesn't address the seal issue. Unless you sealed it with moisture inside already some how. Hope it helps.

Joe

Quote:

Originally Posted by MrSir

awsome diy. I just ordered the morimoto xb halos and the lenses, going to be doing this to my z by the end of the month. will post pics here.

Awesome, always looking for new pics, ideas and methods. This thread is only as good as we make it. Those XBs are nice, I'm planning on redoing mine with them. Can't wait to see your build..

MrSir · 11-06-2012, 08:05 AM

awsome diy. I just ordered the morimoto xb halos and the lenses, going to be doing this to my z by the end of the month. will post pics here.

10-14-2012, 01:58 PM	#2 (permalink)
Nut_N_Much A True Z Fanatic Join Date: Dec 2011 Location: Pensacola Florida Posts: 1,696 Drives: Awesome Car Rep Power: 27	New Project... Pulling out Ironman and Landing Strips, installing Dual Halo's, and G35 lenses leaving in the Demon Eyes: Took 15 min per light to get them opened, made quick video using the box and a heat gun.. https://www.youtube.com/watch?v=PaXz...ure=plpp_video Nissan 370Z Forum - Nut_N_Much's Album: New Set to Fix Mr&Mrs and Underdog like this. __________________ Did new cool science stuff to the car !!! http://www.the370z.com/mazoc/99606-z...y-14-17-a.html http://www.the370z.com/diy-section-d...-w-videos.html Last edited by Nut_N_Much; 10-14-2012 at 02:06 PM.

10-24-2012, 01:04 PM	#7 (permalink)
Nut_N_Much A True Z Fanatic Join Date: Dec 2011 Location: Pensacola Florida Posts: 1,696 Drives: Awesome Car Rep Power: 27	Already got you covered. They will be here tomorrow. Yours ill use on my rebuild. Mr&Mrs likes this. __________________ Did new cool science stuff to the car !!! http://www.the370z.com/mazoc/99606-z...y-14-17-a.html http://www.the370z.com/diy-section-d...-w-videos.html

10-11-2012, 08:01 PM	#8 (permalink)
Mr&Mrs A True Z Fanatic Join Date: May 2010 Location: Tampa Posts: 4,207 Drives: RZ34 Rep Power: 31941	Those look awesome nice job! __________________ Project Z <--Click - Check out the link too many mods to list!

10-14-2012, 08:06 PM	#10 (permalink)
anhdat503 Base Member Join Date: Jul 2012 Location: Portland Oregon Posts: 216 Drives: 12 Nissan 370z NismO Rep Power: 13	thnk alot __________________ Injen IntakesHKS Hi-Power Ti ExhaustTein LoweringStillen Sway BarsSPC Front & RearBlack Door HandleBlackOut TailLightsNismo CF Shift KnobCF Hood StrutsCF Cubby DoorCF Shifter TrimCF Radiator CoverCF Brake Fluid Cover & Battery Cover

11-04-2012, 08:09 PM	#13 (permalink)
Tward Enthusiast Member Join Date: Feb 2011 Location: North Little Rock, AR Posts: 318 Drives: 09 Nissan 370z BS M6 Rep Power: 15	Great stuff in this thread. I have a question about what to do if I have seen moisture in one of my headlights. I didnt seal up my drivers side headlight completely and have noticed moisture in side at times of heavy rain, not much but a little condensation. Could i try to heat up the headlight and press it back together and see if that does the trick? Nut_N_Much likes this. __________________ Nismo S - Tune Body Kit/ UAM Fenders / Fast Intentions CBE 12/ Stillen CAI/ PWD JDM Shift Knob/BlueBat Vinyl' R.I.P Garrett Uekman

10-12-2012, 09:03 AM	#9 (permalink)
Huan'z Track Member Join Date: Apr 2010 Location: houston,texas Posts: 641 Drives: black 370z 7/AT. Rep Power: 17	I live in Houston Texas. Anyone can help me out to do this mod? Sent from my iPhone using Tapatalk

10-17-2012, 11:24 AM	#11 (permalink)
djtodd Track Member Join Date: Jun 2012 Location: Lexington, SC Posts: 932 Drives: 2012 Nismo TT Rep Power: 3398	So, how's the vinyl on the projector housings holding up? Would really like to do something similar, just concerned about the heat cycles. Thanks!

11-06-2012, 08:05 AM	#15 (permalink)
MrSir Enthusiast Member Join Date: Oct 2011 Location: Toronto Posts: 286 Drives: 09 370z Black A7 Rep Power: 14	awsome diy. I just ordered the morimoto xb halos and the lenses, going to be doing this to my z by the end of the month. will post pics here. Nut_N_Much likes this. __________________ Evo-R Front Lip \| RAZO Shifter Knob \| Avant Garde Wheels \| Hankook Tires \| Berk HFCs \| Agency Power CBE \| AEM CAIs \| Z1 Oil Cooler \| Morimoto xB LED Halos \| Tein Super Street \| StopTech Rotors, Pads, SS Lines

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Halo kit	rikkiphan1506	Exterior & Interior	3	01-31-2013 11:31 PM
Halo 4	The Dimer	The Lounge (Off Topic)	6	03-05-2012 03:41 PM
Z elininator drag Video's	Z eliminator	Canada	0	08-15-2010 03:41 PM
How To detailing video's	Kyle@STILLEN	Detailing / Washing / Waxing / Cosmetic Maintenance and Repair	2	03-02-2010 12:07 AM
Video's of the new arrival?	Shortbus	Nissan 370Z General Discussions	1	01-04-2009 05:14 PM