DIY: LED Halo w/Video's

Nut_N_Much · 07-07-2012, 02:02 PM

It worked awesome.. I ran the heat gun about 30 min while I played with the car. I tried pulling them out bare handed NOT!!! Use gloves, make sure you are light to the touch, there are little plastic pieces all over these things that could bend or brake off due to the heat.

The light I set in the sun got so hot I needed gloves to move it. I tried pulling apart and could do it but the sealant was still tacky, using the heat gun while pulling it came apart. I was worried about cracking the cover while pulling that's why I used the heat gun, I wanted to soften it up enough to pull apart with out using the box.

Cool 2 confirmed ways to do it without an oven!

Set it in my lap, popped the plastic tabs and pulled it apart, Easy day!!

My Man Cave !!!!!

Will get to work on pulling the rest apart and painting.. Update tonight if I haven't had a heat stroke!!

07-07-2012, 02:02 PM	#11 (permalink)
Nut_N_Much A True Z Fanatic Join Date: Dec 2011 Location: Pensacola Florida Posts: 1,696 Drives: Awesome Car Rep Power: 27	Update It worked awesome.. I ran the heat gun about 30 min while I played with the car. I tried pulling them out bare handed NOT!!! Use gloves, make sure you are light to the touch, there are little plastic pieces all over these things that could bend or brake off due to the heat. The light I set in the sun got so hot I needed gloves to move it. I tried pulling apart and could do it but the sealant was still tacky, using the heat gun while pulling it came apart. I was worried about cracking the cover while pulling that's why I used the heat gun, I wanted to soften it up enough to pull apart with out using the box. Cool 2 confirmed ways to do it without an oven! Set it in my lap, popped the plastic tabs and pulled it apart, Easy day!! My Man Cave !!!!! Will get to work on pulling the rest apart and painting.. Update tonight if I haven't had a heat stroke!! Alex Kiesl and jamesDJRPM like this. __________________ Did new cool science stuff to the car !!! http://www.the370z.com/mazoc/99606-z...y-14-17-a.html http://www.the370z.com/diy-section-d...-w-videos.html Last edited by Nut_N_Much; 07-07-2012 at 02:06 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Halo kit	rikkiphan1506	Exterior & Interior	3	01-31-2013 11:31 PM
Halo 4	The Dimer	The Lounge (Off Topic)	6	03-05-2012 03:41 PM
Z elininator drag Video's	Z eliminator	Canada	0	08-15-2010 03:41 PM
How To detailing video's	Kyle@STILLEN	Detailing / Washing / Waxing / Cosmetic Maintenance and Repair	2	03-02-2010 12:07 AM
Video's of the new arrival?	Shortbus	Nissan 370Z General Discussions	1	01-04-2009 05:14 PM