looks good! :tup:

heatgun or w/e u use to open lights, screw driver, drill, spray can if youre painting it. thats it. everything else lightwurkz will provide you.

Figured i would need a whole lot more stuff to do it. Thanks for the list.
Does the harness from lightwurkz plug right into our daytime running lights. I have no electrical experience, so before i buy the led angle eye i want to make sure i am capable of getting it all together.

yup just connect the wires and plug in the only slot u can

This thread is full of win, nice job!

Preciate it man!

Stuff you need
 

Sorry brother, I've been out of town...

Add some 220 sand paper to rough up the chrome before you paint. Also will need something to attach the halo I used 2 part epoxy and auto goop. The epoxy was a pain in the *** and isn't holding up well(Mainly Because I Put To Much Hardener), the Goop is easier to work with and so far is holding up fine. Some other items..

Soder Gun or Wire Connectors
220 Sand paper
10mm Crescent wrench
Nice clean soft surface to lay the light on (minimize scratches)
Paint: Krylon is good
2 sided tape to mount the LightWurkz Control Box
Auto Goop or 2 Part Epoxy

:tup:

Can we please give this guy some rep points for such an awesome DIY! :tup: I def. want this mod. I'm not sure I can do it myself .. But it looks amazing! #WANT :tup:

I did. Awesome job! :tup:

repped.

Thanks man, Just hope we keep adding to it.. :tup: DIY is the right spot for it.. Thanks for moving it...

good thread, I recently did the same thing to a set of headlights: http://www.the370z.com/members/amuse...-08-53-331.jpg

:iagree: Great Diy.... Thats my car finished product looks like this http://www.the370z.com/members/amuse...-dual-halo.jpg Will post pictures of the halos on just havent had the time yet

http://www.the370z.com/members/amuse...dual-halos.jpg on