DIY: LED Halo w/Video's

Baer383 · 01-20-2013, 01:52 PM

They look good.

Chinook · 01-31-2013, 11:08 AM

Thank you to everyone that contributed to this DIY for giving me the inspiration to do the one mod I have wanted for the longest time! I decided to color match the housing to the car and had the trim done with carbon fiber hydrographics

JMac88 · 01-31-2013, 11:33 AM

Looks awewome Lee! Wtb these hydrographics, where did you have them done?

Nut_N_Much · 01-31-2013, 02:16 PM

Quote:

Originally Posted by Chinook

Thank you to everyone that contributed to this DIY for giving me the inspiration to do the one mod I have wanted for the longest time! I decided to color match the housing to the car and had the trim done with carbon fiber hydrographics

Looks great man!!! Please let us know how the graphics hold up under the heat. When i wrapped mine with 3M there was some dout if it would hold up under the heat. So far not issues with the 3M

.

Those are some sexy lights

Mr&Mrs · 01-31-2013, 03:00 PM

Looks killer Chinook!

MrSir · 02-03-2013, 02:31 AM

hmm well this sucks, its been 2.5 months and 1/3 of the leds on the passenger side 90mm halo have stopped working. I am expecting it to stop working all together soon. At this point i think i got a defective halo, since the other 3 halos are working just fine. BUt we will see how long they last as well. Anyone have any ideas on what could cause this? Either way im not opening these headlights again any time soon.

HArturo319 · 02-03-2013, 03:23 AM

I was afraid that would happen. LEDS can be unreliable a lot of the time.

-From my phone, to space, and straight to your face.

Mr&Mrs · 02-03-2013, 07:21 AM

That stinks to hear, I think you will find it is a bad halo. My wifes are 3 years old almost and still perfect.

Quote:

Originally Posted by MrSir

hmm well this sucks, its been 2.5 months and 1/3 of the leds on the passenger side 90mm halo have stopped working. I am expecting it to stop working all together soon. At this point i think i got a defective halo, since the other 3 halos are working just fine. BUt we will see how long they last as well. Anyone have any ideas on what could cause this? Either way im not opening these headlights again any time soon.

Nut_N_Much · 02-03-2013, 11:00 AM

Quote:

Originally Posted by MrSir

hmm well this sucks, its been 2.5 months and 1/3 of the leds on the passenger side 90mm halo have stopped working. I am expecting it to stop working all together soon. At this point i think i got a defective halo, since the other 3 halos are working just fine. BUt we will see how long they last as well. Anyone have any ideas on what could cause this? Either way im not opening these headlights again any time soon.

Man sorry to here that.. If you don't mind me asking what type of halo's were they..

Sounds like the soldered connect has been broken.. Are they sealed in a plastic case like the picture on the left or are they Like XB's and sealed in resin in the picture on the right?

MrSir · 02-03-2013, 11:16 AM

They are the Morimoto xb in amber color. This sucks badly i realy dont want to open the headlight again. I most likely will drive it like this till it dies out and my car looks like a winking pirate

Nut_N_Much · 02-03-2013, 11:37 AM

Quote:

Originally Posted by MrSir

They are the Morimoto xb in amber color. This sucks badly i realy dont want to open the headlight again. I most likely will drive it like this till it dies out and my car looks like a winking pirate

Thanks for the response.. You are the first

I have herd of that this has happened to. Man that sucks, it hard as hell getting them open in the cold too.

If you call them latter when your ready to work the warranty on them; please let us know who it goes.

Joe

MrSir · 02-03-2013, 01:01 PM

Well getting them open isnt that bad but unglueing the apoxi without braking anything. Ye ill have to see how the warranty works. They are suppose to have pretty good one.

Nut_N_Much · 02-06-2013, 06:11 PM

Man, I had a return customer that had one light with moisture in it. He parks his car outside.. I don't recommend anyone relies on only re-using stock sealant.

The guy that says "All you gotta do is push it back in the crack" is taking risk. Thank god the customer was driving a NISMO, only took 15min to get the bumper off and warm up the light..

If you do this stuff for other people always use new sealant: OCI Butyl Rubber Glue - Accessories from The Retrofit Source Inc
$15.00 is good money for piece of mind...

VDC_OFF · 02-07-2013, 01:44 AM

Quote:

Originally Posted by MrSir

hmm well this sucks, its been 2.5 months and 1/3 of the leds on the passenger side 90mm halo have stopped working. I am expecting it to stop working all together soon. At this point i think i got a defective halo, since the other 3 halos are working just fine. BUt we will see how long they last as well. Anyone have any ideas on what could cause this? Either way im not opening these headlights again any time soon.

could possibly be how you put it in. It says to be extremely careful and not put too much pressure in one spot when squeezing it in. The gel that coats the led's can be punctured easily and break off in chunks.

MrSir · 02-07-2013, 09:16 AM

Quote:

Originally Posted by VDC_OFF

could possibly be how you put it in. It says to be extremely careful and not put too much pressure in one spot when squeezing it in. The gel that coats the led's can be punctured easily and break off in chunks.

Naah its not that, i made sure i was extremely careful how i put them in. Even pressure all around. Plus i dont know if you've seen these things they are literately the exact size of the main projector piece. They fit in it like a glove. Plus you can clearly see that the gel coating is still intact and in place. Anyways i sent TRS an email with what has happened, i will keep you guys updated on the whole warranty claim and how cooperative they are.

01-20-2013, 01:52 PM	#181 (permalink)
Baer383 A True Z Fanatic Join Date: Aug 2010 Location: Lawrenceville,Ga Posts: 4,293 Drives: My foot up your azz Rep Power: 30	They look good. __________________ 2013 ZL1 754 rwhp 747 rwtq

01-31-2013, 11:33 AM	#183 (permalink)
JMac88 Enthusiast Member Join Date: Jun 2010 Location: Edmonton AB Posts: 416 Drives: 2010 PW 370z Rep Power: 15	Looks awewome Lee! Wtb these hydrographics, where did you have them done? yungkani likes this. __________________ Full Mod List

01-31-2013, 03:00 PM	#185 (permalink)
Mr&Mrs A True Z Fanatic Join Date: May 2010 Location: Tampa Posts: 4,207 Drives: RZ34 Rep Power: 31940	Looks killer Chinook! __________________ Project Z <--Click - Check out the link too many mods to list!

02-03-2013, 02:31 AM	#186 (permalink)
MrSir Enthusiast Member Join Date: Oct 2011 Location: Toronto Posts: 286 Drives: 09 370z Black A7 Rep Power: 14	hmm well this sucks, its been 2.5 months and 1/3 of the leds on the passenger side 90mm halo have stopped working. I am expecting it to stop working all together soon. At this point i think i got a defective halo, since the other 3 halos are working just fine. BUt we will see how long they last as well. Anyone have any ideas on what could cause this? Either way im not opening these headlights again any time soon. __________________ Evo-R Front Lip \| RAZO Shifter Knob \| Avant Garde Wheels \| Hankook Tires \| Berk HFCs \| Agency Power CBE \| AEM CAIs \| Z1 Oil Cooler \| Morimoto xB LED Halos \| Tein Super Street \| StopTech Rotors, Pads, SS Lines

02-03-2013, 03:23 AM	#187 (permalink)
HArturo319 Enthusiast Member Join Date: Jun 2012 Location: Houston, TX Posts: 323 Drives: 2013 PW NISMO Rep Power: 13	I was afraid that would happen. LEDS can be unreliable a lot of the time. -From my phone, to space, and straight to your face. __________________ Me And Zoloft Get Along Just Fine

02-03-2013, 11:16 AM	#190 (permalink)
MrSir Enthusiast Member Join Date: Oct 2011 Location: Toronto Posts: 286 Drives: 09 370z Black A7 Rep Power: 14	They are the Morimoto xb in amber color. This sucks badly i realy dont want to open the headlight again. I most likely will drive it like this till it dies out and my car looks like a winking pirate 370ZNISMO#704 and Nut_N_Much like this. __________________ Evo-R Front Lip \| RAZO Shifter Knob \| Avant Garde Wheels \| Hankook Tires \| Berk HFCs \| Agency Power CBE \| AEM CAIs \| Z1 Oil Cooler \| Morimoto xB LED Halos \| Tein Super Street \| StopTech Rotors, Pads, SS Lines

02-03-2013, 01:01 PM	#192 (permalink)
MrSir Enthusiast Member Join Date: Oct 2011 Location: Toronto Posts: 286 Drives: 09 370z Black A7 Rep Power: 14	Well getting them open isnt that bad but unglueing the apoxi without braking anything. Ye ill have to see how the warranty works. They are suppose to have pretty good one. Nut_N_Much likes this. __________________ Evo-R Front Lip \| RAZO Shifter Knob \| Avant Garde Wheels \| Hankook Tires \| Berk HFCs \| Agency Power CBE \| AEM CAIs \| Z1 Oil Cooler \| Morimoto xB LED Halos \| Tein Super Street \| StopTech Rotors, Pads, SS Lines

02-06-2013, 06:11 PM	#193 (permalink)
Nut_N_Much A True Z Fanatic Join Date: Dec 2011 Location: Pensacola Florida Posts: 1,696 Drives: Awesome Car Rep Power: 27	Man, I had a return customer that had one light with moisture in it. He parks his car outside.. I don't recommend anyone relies on only re-using stock sealant. The guy that says "All you gotta do is push it back in the crack" is taking risk. Thank god the customer was driving a NISMO, only took 15min to get the bumper off and warm up the light.. If you do this stuff for other people always use new sealant: OCI Butyl Rubber Glue - Accessories from The Retrofit Source Inc $15.00 is good money for piece of mind... wheee!, 370ZNISMO#704, vrfreak and 1 others like this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Halo kit	rikkiphan1506	Exterior & Interior	3	02-01-2013 12:31 AM
Halo 4	The Dimer	The Lounge (Off Topic)	6	03-05-2012 04:41 PM
Z elininator drag Video's	Z eliminator	Canada	0	08-15-2010 04:41 PM
How To detailing video's	Kyle@STILLEN	Detailing / Washing / Waxing / Cosmetic Maintenance and Repair	2	03-02-2010 01:07 AM
Video's of the new arrival?	Shortbus	Nissan 370Z General Discussions	1	01-04-2009 06:14 PM