How to repair holes in my front bumper ?!

bebo-valdez

hi there,

i am from Tel Aviv (far far Israel).

i just received my STILLEN Front License Plate Bracket.

when i took apart my original front license i discovered holes in the bumper.

is anyone familiar with this issue ?? what do i need to do >?

tnx.

Baer383

You can use 3M part # 5887 here is a link to see what I mean

3M? EZ Sand Flexible Parts Repair, 05887, 200 mL, 6 per case:3M? EZ Sand Flexible Parts Repair, 05887, 200 mL, 6 per case

__________________
2013 ZL1

754 rwhp 747 rwtq

Baer383

And you must also use this before 5887,just alittle bit

3M? Polyolefin Adhesion Promoter, 05907, 12 oz Net Wt, 6 per case:3M? Polyolefin Adhesion Promoter, 05907, 12 oz Net Wt, 6 per case

__________________
2013 ZL1

754 rwhp 747 rwtq

bebo-valdez

Uploaded with ImageShack.us

Baer383

Take the bumper off clean the front and backside sand it with 80 grit sandpaper use 3M patch on the back

3M Flexible Bumper Patch 05888

scuff the back side with 80 grit and use the 4247 (don't forget the 5907 with 5887)as I said on the front and the patch on the back the 5887 goes on the front.

Buy online 3M 4247 Duramix Super Fast Repair Adhesive, 04247, 200 mL, 6 cartridges per case: 13900

this stuff dries VERY quick 10 seconds tops

__________________
2013 ZL1

754 rwhp 747 rwtq