DIY: How to raise your factory seat to improve visibility

tondraj · 01-07-2016, 01:45 PM

I did this last week to my Z as well. It just adds that little bit of height needed to give me the right seating position.

Sent from my XT1096 using Tapatalk

kenchan · 01-07-2016, 03:30 PM

glad to hear you guys are enjoying this DIY.

Daduc · 01-21-2016, 09:24 PM

Just did this today to the Z. Wish you still had the pictures but it was pretty easy to do. Took about 10-15 mins. Great mod for short people like me

littlejuanito · 05-02-2016, 12:26 PM

Quote:

Originally Posted by tondraj

I did this last week to my Z as well. It just adds that little bit of height needed to give me the right seating position.

Sent from my XT1096 using Tapatalk

I know the passenger seat would benefit from this mod but, wont the adjustment knobs on the side of the driver's seat help you raise the seat?

imazman · 09-19-2016, 10:33 PM

I assume this will apply to the nismo seats too...can anyone confirm? I would love to do this mod this weekend...mainly because I could not find any smaller aftermarket side view mirrors!

/Z/

kenchan · 09-20-2016, 07:37 AM

yah, should be da same.

check out craftssquare for the mirrors. japanparts should be able to get u a pair. there might be some waiting though.

kenchan · 09-20-2016, 07:39 AM

Craft Square

imazman · 09-20-2016, 07:16 PM

Why only two bolts and spacers? Wouldn't you want 4, 2 for front and 2 for back?

kenchan · 09-21-2016, 07:04 AM

Quote:

Originally Posted by imazman

Why only two bolts and spacers? Wouldn't you want 4, 2 for front and 2 for back?

if u look at the seat rail, u will notice that the front is angled so u cant add extra spacers on the front. the seat adjusters have enough range to give you a nice flat ride for ur butt, so no worries.

david81968 · 09-21-2016, 12:36 PM

Yes, they do fit the NISMOs. I have a 2016.

I ordered the bolts and spacers through boltdepot.com

If you want to continue using the plastic caps, you'll want to use these bolts.

15855 Metric JIS hex bolts, Zinc plated class 8.8 steel, 10mm x 1.25mm x 50mm

13733 Spacers, Zinc plated steel, 3/8" x 1" (3/4" O.D.)

Easy install, but I had a friend sit on the seat to help the alignment when dropping bolts back through.

Good luck!

littlejuanito · 09-21-2016, 12:45 PM

Quote:

Originally Posted by kenchan

if u look at the seat rail, u will notice that the front is angled so u cant add extra spacers on the front. the seat adjusters have enough range to give you a nice flat ride for ur butt, so no worries.

Would you mind posting the pictures to this again please.. thanks

kenchan · 09-22-2016, 08:00 PM

Quote:

Originally Posted by littlejuanito

Would you mind posting the pictures to this again please.. thanks

sorry littlejuanito. its been a while since i deleted da picts and i dont have them any more. but it's really simple to do.

littlejuanito · 09-23-2016, 05:31 PM

Quote:

Originally Posted by kenchan

sorry littlejuanito. its been a while since i deleted da picts and i dont have them any more. but it's really simple to do.

No worries Kenchan.. Yeah, it seems simple enough to do.

DamnThatZGuy · 10-12-2016, 01:01 AM

Quote:

Originally Posted by bewhitey

Thanks for the post. I just did this... took about 15 - 20 min. I am 5'-8" so not the tallest mofo but I do like sitting up high. I went online to the bolt depot and bought my stuff, worked perfect thanks the specs kenchan had posted.

I bought two zinc plated class 10.9 steel 10mm x 1.25mm x 50mm bolts @ .89 cents each

https://www.boltdepot.com/Metric_hex..._x_1.25mm.aspx

And two zinc plated steel spacers 3/8" x 1" (3/4" O.D.) @ $2.21

https://www.boltdepot.com/Spacers_Zi...steel_3_8.aspx

I did not buy any washers because I thought I could re-use the existing ones but nissan used some kind of black magic spell and they are forever stuck on the stock bolts.... so I suggest buying some washers while your at it. The bolts from bolt depot are large enough they will not slide through your seat bracket hole but a washer would just give the hole thing more strength.

So if you raise just the rear of the seat, won't the front angled mounting points no longer line up correctly so that when tightened down they wont mount flush? Will they be at even more of an angle?

Swaz · 06-10-2021, 03:37 PM

Wow so no one raised their seats for 5 whole years? Lol guess I'll be the last man standing.... Or is it sitting? ��

01-21-2016, 09:24 PM	#48 (permalink)
Daduc Base Member Join Date: Dec 2015 Location: South FL Posts: 17 Drives: 370z Rep Power: 10	Just did this today to the Z. Wish you still had the pictures but it was pretty easy to do. Took about 10-15 mins. Great mod for short people like me kenchan likes this. __________________ \|\| 09 SR Touring Sport 7AT \|\| ART PIPES \|\| F.I. 18" CBE \|\| 20/20 \|\| Tein \|\| Evo-R \|\| SPC \|\|

09-20-2016, 07:39 AM	#52 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	Craft Square imazman likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Leather replacement seat cover options for factory cloth seats.	gsxr750	Nissan 370Z General Discussions	9	06-24-2012 11:41 AM
Amuse Wing Visibility from inside?	Amuse370z	Exterior & Interior	9	03-19-2012 06:01 PM
Night visibility while left turning	Vaughanabe13	Nissan 370Z General Discussions	14	08-01-2011 08:04 PM
Sparco Milano Leather Seat? or Factory leather seats	giez	Exterior & Interior	17	11-14-2009 02:31 PM

01-07-2016, 01:45 PM	#46 (permalink)
tondraj Base Member Join Date: Jun 2015 Location: Pittsburgh Posts: 6 Drives: '11 370Z Sport M6 Rep Power: 10	I did this last week to my Z as well. It just adds that little bit of height needed to give me the right seating position. Sent from my XT1096 using Tapatalk

01-07-2016, 03:30 PM	#47 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	glad to hear you guys are enjoying this DIY.

09-19-2016, 10:33 PM	#50 (permalink)
imazman Base Member Join Date: Jan 2014 Location: PA Posts: 120 Drives: 11' 370Z Nismo Rep Power: 11	I assume this will apply to the nismo seats too...can anyone confirm? I would love to do this mod this weekend...mainly because I could not find any smaller aftermarket side view mirrors! /Z/

09-20-2016, 07:37 AM	#51 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	yah, should be da same. check out craftssquare for the mirrors. japanparts should be able to get u a pair. there might be some waiting though.

09-20-2016, 07:16 PM	#53 (permalink)
imazman Base Member Join Date: Jan 2014 Location: PA Posts: 120 Drives: 11' 370Z Nismo Rep Power: 11	Why only two bolts and spacers? Wouldn't you want 4, 2 for front and 2 for back?

09-21-2016, 12:36 PM	#55 (permalink)
david81968 Base Member Join Date: Mar 2016 Location: Fort Lauderdale Posts: 73 Drives: '16 370z NISMO Rep Power: 9	Yes, they do fit the NISMOs. I have a 2016. I ordered the bolts and spacers through boltdepot.com If you want to continue using the plastic caps, you'll want to use these bolts. 15855 Metric JIS hex bolts, Zinc plated class 8.8 steel, 10mm x 1.25mm x 50mm 13733 Spacers, Zinc plated steel, 3/8" x 1" (3/4" O.D.) Easy install, but I had a friend sit on the seat to help the alignment when dropping bolts back through. Good luck!

06-10-2021, 03:37 PM	#60 (permalink)
Swaz Base Member Join Date: May 2021 Location: California Posts: 2 Drives: 09 370Z M6 Rep Power: 4	Wow so no one raised their seats for 5 whole years? Lol guess I'll be the last man standing.... Or is it sitting? ��