Steering Lock: cut one wire. /switch optional

fritz · 01-28-2013, 04:09 PM

Damn! ...Sorreee.

...I doubt the steering lock failed and immobilised the engine. Probably summat else as when the lock fails and the steering can turn, the engine will/should start, showing a small warning light. (See owner's handbook on this).
Essentially that is what cutting the wire, removing the fuse or fitting the switch does, but without the warning light.

Fritz

ZForce · 02-25-2013, 12:09 AM

Steering lock (s/l) failed last week (3/21/13) on revised part #C. Odd thing about it, is I was planing on removing the fuse today. Oh well, could not have happened any sooner. Been driving on borrowed time. Replaced with CURRENT rev part D. Driving a 2009 sport model with 45K miles. This is the original steering lock. Total dollar out of pocket = ZERO. Extended warranty and towing picked up by extended warranty. Picking up the harness from CarKitcompany.com

onzedge · 02-25-2013, 08:44 AM

Quote:

Originally Posted by ZForce

Steering lock (s/l) failed last week (3/21/13) on revised part #C. Odd thing about it, is I was planing on removing the fuse today. Oh well, could not have happened any sooner. Been driving on borrowed time. Replaced with CURRENT rev part D. Driving a 2009 sport model with 45K miles. This is the original steering lock. Total dollar out of pocket = ZERO. Extended warranty and towing picked up by extended warranty. Picking up the harness from CarKitcompany.com

I am happy you got everything going -- and for free.

bdl99 · 02-26-2013, 08:09 AM

Quote:

Originally Posted by ZForce

Steering lock (s/l) failed last week (3/21/13) on revised part #C. Odd thing about it, is I was planing on removing the fuse today. Oh well, could not have happened any sooner. Been driving on borrowed time. Replaced with CURRENT rev part D. Driving a 2009 sport model with 45K miles. This is the original steering lock. Total dollar out of pocket = ZERO. Extended warranty and towing picked up by extended warranty. Picking up the harness from CarKitcompany.com

Glad you got it all sorted. I sent you an email yesterday but wanted to check that you meant to order 2 harnesses? Please let me know and I will either ship out the two today or just ship one and refund for the other.

Best regards,
Brian (CarKitCompany)

ironhide · 02-26-2013, 06:34 PM

Ordered my bypass harness and installed today. Car starts and runs fine, also a super easy install.

bdl99 · 03-10-2013, 09:49 PM

Reference:
NTB13-014
Date:
March 7, 2013
VOLUNTARY SERVICE CAMPAIGN 2009 – 2011 STEERING LOCK UNIT
CAMPAIGN ID #:
APPLIED VEHICLES: 2009 – 2010 370Z (Z34)
INTRODUCTION
P3208
2009 – 2011 GTR (R35)
Check Service COMM to confirm campaign eligibility.
Nissan is conducting a Voluntary Service Campaign to replace the steering lock assembly on certain specific 2009 – 2010 model year 370Z and 2009 – 2011 model year GTR vehicles due to excessive oil within the assembly, which could cause the Body Control Module (BCM) to prevent the engine from starting when the ignition is cycled. This issue does not affect steering or engine operation when the vehicle is already running.
IDENTIFICATION NUMBER
Nissan has assigned identification number P3208 to this campaign. This number must appear on all communications and documentation of any nature dealing with this campaign.
DEALER RESPONSIBILITY
Dealers are to repair vehicles falling within range of this campaign that enter the service department. This includes vehicles purchased from private parties, vehicles presented by transient (tourists) owners, and vehicles in a dealer’s inventory
Nissan Bulletins are intended for use by qualified technicians, not 'do-it-yourselfers'. Qualified technicians are properly trained individuals who have the equipment, tools, safety instruction, and know-how to do a job properly and safely. NOTE: If you believe that a described condition may apply to a particular vehicle, DO NOT assume that it does. See your Nissan dealer to determine if this applies to your vehicle.

sboden · 03-11-2013, 02:34 AM

Doesn't help those with 2011's or the tow bill....still need to pull fuse, snip wire, or install harness.

GaleForce · 03-11-2013, 09:19 AM

Quote:

Originally Posted by sboden

Doesn't help those with 2011's or the tow bill....still need to pull fuse, snip wire, or install harness.

2011's don't have the SLU.

DEpointfive0 · 03-11-2013, 09:20 AM

Quote:

Originally Posted by GaleForce

2011's don't have the SLU.

Early 2011's did

OldGuy · 03-11-2013, 10:28 AM

Question is whether or not to pull the fuse after the fix has been done. Can this fix be trusted? I understand that if the SLU would again fail after the fix, they would cover but I just don't have the confidence. I plan to remove the fuse after fix.

JARblue · 03-11-2013, 12:04 PM

Quote:

Originally Posted by GaleForce

2011's don't have the SLU.

Quote:

Originally Posted by DEpointfive0

Early 2011's did

^This^ I have a 2011 w/ SLU; Mr. Alcheng has a 2011 w/o SLU

Quote:

Originally Posted by OldGuy

Question is whether or not to pull the fuse after the fix has been done. Can this fix be trusted? I understand that if the SLU would again fail after the fix, they would cover but I just don't have the confidence. I plan to remove the fuse after fix.

Good call

My understanding is that even the last revision of the SLU is prone to failure. I would remove the fuse regardless of whether you had the unit replaced. Also, I am quite confident the fuse is not connected to anything else because Nissan omitted both the unit and the fuse in the later models. If the fuse was working with anything else, you'd think they'd have left it in the fuse box.

GaleForce · 03-11-2013, 12:18 PM

Quote:

Originally Posted by DEpointfive0

Early 2011's did

Right, thanks for catching that. Maybe those few people will be contacted by Nissan when they mail out the letters to customers? It would cut down on the confusion and worry of everyone with a 2011 Z. Guess we'll find out shortly.

SouthArk370Z · 03-11-2013, 01:29 PM

Quote:

Originally Posted by JARblue

... Also, I am quite confident the fuse is not connected to anything else because Nissan omitted both the unit and the fuse in the later models. If the fuse was working with anything else, you'd think they'd have left it in the fuse box.

According to the wiring diagrams, there is a signal that comes from the line between the fuse and the SLU and goes to the BCM (or was it ECM?). As far as I know, no one has been able to ascertain the function of this signal, but it doesn't appear to be important. Many ppl, myself included, have removed the fuse with no problems.

Unless Nissan has redesigned the SLU, I am assuming that the replacements will fail soon and I will remove the fuse (will put it back in before going to dealer) after the SLU is replaced. If it turns out to be a new-and-improved SLU, the next owner can re-activate the damn thing, if they want to.

JARblue · 03-11-2013, 01:39 PM

Quote:

Originally Posted by SouthArk370Z

According to the wiring diagrams, there is a signal that comes from the line between the fuse and the SLU and goes to the BCM (or was it ECM?). As far as I know, no one has been able to ascertain the function of this signal, but it doesn't appear to be important. Many ppl, myself included, have removed the fuse with no problems.

It is the BCM, and it seems to me from the post below, that this is the signal from the SLU to the car that tells it whether the lock is unlocked and the car is ready to turn on...

Steering Lock: cut one wire. /switch optional

I have removed my fuse along with several other people's

ironhide · 03-11-2013, 05:36 PM

I don't trust it Nissan stopped installing the locks. For a reason im sticking to my bypass harness because my car starts fine

02-26-2013, 06:34 PM	#470 (permalink)
ironhide Base Member Join Date: Jun 2012 Location: georgia Posts: 12 Drives: 2013 370z mb/6 speed Rep Power: 13	no steering lock for me Ordered my bypass harness and installed today. Car starts and runs fine, also a super easy install. bdl99 likes this.

03-10-2013, 09:49 PM	#471 (permalink)
bdl99 Base Member Join Date: Oct 2010 Location: NJ Posts: 244 Drives: Nissan GT-R 2011 Rep Power: 15	Reference: NTB13-014 Date: March 7, 2013 VOLUNTARY SERVICE CAMPAIGN 2009 – 2011 STEERING LOCK UNIT CAMPAIGN ID #: APPLIED VEHICLES: 2009 – 2010 370Z (Z34) INTRODUCTION P3208 2009 – 2011 GTR (R35) Check Service COMM to confirm campaign eligibility. Nissan is conducting a Voluntary Service Campaign to replace the steering lock assembly on certain specific 2009 – 2010 model year 370Z and 2009 – 2011 model year GTR vehicles due to excessive oil within the assembly, which could cause the Body Control Module (BCM) to prevent the engine from starting when the ignition is cycled. This issue does not affect steering or engine operation when the vehicle is already running. IDENTIFICATION NUMBER Nissan has assigned identification number P3208 to this campaign. This number must appear on all communications and documentation of any nature dealing with this campaign. DEALER RESPONSIBILITY Dealers are to repair vehicles falling within range of this campaign that enter the service department. This includes vehicles purchased from private parties, vehicles presented by transient (tourists) owners, and vehicles in a dealer’s inventory Nissan Bulletins are intended for use by qualified technicians, not 'do-it-yourselfers'. Qualified technicians are properly trained individuals who have the equipment, tools, safety instruction, and know-how to do a job properly and safely. NOTE: If you believe that a described condition may apply to a particular vehicle, DO NOT assume that it does. See your Nissan dealer to determine if this applies to your vehicle. __________________ https://lh3.googleusercontent.com/-b...carkit_b_1.jpg Website: www.CarKitCompany.com email: Brian@CarKitCompany.com

03-11-2013, 02:34 AM	#472 (permalink)
sboden Track Member Join Date: Feb 2010 Location: Kansas City Posts: 580 Drives: 09 Blue 370Z T/S 6MT Rep Power: 16	Doesn't help those with 2011's or the tow bill....still need to pull fuse, snip wire, or install harness. __________________ 09 Monterey Blue 370Z Sport/Tour, Takeda Shorties, Blk Nismo Wheels, Blk Painted Top/Exhaust cut out, Invidia Gemini CBE, Southbend Stage 2 clutch, Lite weight flywheel, Zspeed HD CSC, flat black headlights. Previously owned 03 G35 Coupe 6MT and Volvo C30 R Design.

03-11-2013, 10:28 AM	#475 (permalink)
OldGuy Base Member Join Date: Dec 2009 Location: Greensburg PA Posts: 899 Drives: '09370Z Red Base A7 Rep Power: 16	Question is whether or not to pull the fuse after the fix has been done. Can this fix be trusted? I understand that if the SLU would again fail after the fix, they would cover but I just don't have the confidence. I plan to remove the fuse after fix. SouthArk370Z likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Steering lock failure	Terrace	Canada	52	06-16-2013 10:32 PM
Those of you who have had Steering Lock Failure	Thechidz	Nissan 370Z General Discussions	449	01-12-2013 06:05 PM
Steering Lock Elimination	Vince	Exterior & Interior	38	05-18-2012 11:43 AM
Wire ties on steering rack boot?	ferrari_rich	Nissan 370Z General Discussions	6	02-02-2010 08:56 PM
Illuminated door lock switch question	MightyBobo	Exterior & Interior	7	04-05-2009 03:23 AM

01-28-2013, 04:09 PM	#466 (permalink)
fritz Base Member Join Date: Aug 2010 Location: Andorre Posts: 90 Drives: 2010 370Z M6 Rep Power: 16	Damn! ...Sorreee. ...I doubt the steering lock failed and immobilised the engine. Probably summat else as when the lock fails and the steering can turn, the engine will/should start, showing a small warning light. (See owner's handbook on this). Essentially that is what cutting the wire, removing the fuse or fitting the switch does, but without the warning light. Fritz

02-25-2013, 12:09 AM	#467 (permalink)
ZForce A True Z Fanatic Join Date: Jul 2009 Location: Roseville, CA Posts: 2,359 Drives: 09 370Z Tour + Sport Rep Power: 21	Steering lock (s/l) failed last week (3/21/13) on revised part #C. Odd thing about it, is I was planing on removing the fuse today. Oh well, could not have happened any sooner. Been driving on borrowed time. Replaced with CURRENT rev part D. Driving a 2009 sport model with 45K miles. This is the original steering lock. Total dollar out of pocket = ZERO. Extended warranty and towing picked up by extended warranty. Picking up the harness from CarKitcompany.com

03-11-2013, 05:36 PM	#480 (permalink)
ironhide Base Member Join Date: Jun 2012 Location: georgia Posts: 12 Drives: 2013 370z mb/6 speed Rep Power: 13	I don't trust it Nissan stopped installing the locks. For a reason im sticking to my bypass harness because my car starts fine