Steering Lock: cut one wire. /switch optional

takjak2 · 05-04-2012, 12:52 PM

Quote:

Originally Posted by axio

... no reason for a harness other than a few people to test whether no #1 wire intact works fine, without having to solder the wires back.

I thought we had a few people who have made the cut? Can we get a little more confirmation and feedback?

Dwight Frye · 05-04-2012, 08:14 PM

I'll take a straight harness without a switch. I don't see the need for a switch while parking. If I want to reactivate the lock function for example, if I were to trade in or sell the car, I would reconnect the original plug. And probably leave the harness in the glovebox with a note on what it is and how to install, at the owner's risk. My '09 model's warranty expires in September and my biggest fear is that the lock will fail stranding me somewhere. Put me down for one as soon as they are available and the functioning is verified to be problem free.

kgb · 05-05-2012, 03:02 PM

I have been monitoring the threads relating to the failed steering locks for some time now and am definitely interested in some form of bypass mechanism. With or without the switch, I want one.

6MT · 05-06-2012, 09:21 PM

C U T T H E W I R E !

Problem solved PERIOD

wheee! · 05-06-2012, 09:46 PM

Quote:

Originally Posted by 6MT

C U T T H E W I R E !

Problem solved PERIOD

So! Did you do it???

memorylasts · 05-07-2012, 12:18 PM

Quote:

Originally Posted by 6MT

C U T T H E W I R E !

Problem solved PERIOD

Did you do it? Or are you trying to

Dwight Frye · 05-08-2012, 07:30 PM

Quote:

Originally Posted by 6MT

C U T T H E W I R E !

Problem solved PERIOD

Pictures or it didn't happen

spearfish25 · 05-08-2012, 07:49 PM

I can't bear reading through 10 pages so I'm just going to post. Why not just cut the brown wire, strip the ends with some length on them and leave them taped off? If you actually need to prove the lock works for some random inspection, just remove the tape and twist the stripped wires together.

If you want a switch on it, just use some telephone wire taps from Radioshack on each end of the severed wire.

kenchan · 05-08-2012, 08:17 PM

Quote:

Originally Posted by spearfish25

I can't bear reading through 10 pages so I'm just going to post. Why not just cut the brown wire, strip the ends with some length on them and leave them taped off? If you actually need to prove the lock works for some random inspection, just remove the tape and twist the stripped wires together.

If you want a switch on it, just use some telephone wire taps from Radioshack on each end of the severed wire.

Sounds like a great idea, try it out and report back to us.

GaleForce · 05-08-2012, 08:26 PM

Quote:

Originally Posted by kenchan

Sounds like a great idea, try it out and report back to us.

It should work, we're just waiting for someone else to cut up their harness first. If my warranty was expired I would do the wire mod.

LMBmikeZ · 05-08-2012, 08:56 PM

Bdl99 will have his harness ready for the few testers he has pre-arranged a beta for with his harness. As soon as these are tested everyone will know if cutting the wire works or not because it will be simulating that exact same electrical signal as if you did the cut wire method. So this will tell everyone if it does or does not work! I would wait until after this before any one does any unnecessary cutting just to safe them from possible problems. Then if it does work you can make your decision on whether to cut the wire or spend a lil $ and get the harness!?!?!?........

Trilitheum · 05-08-2012, 09:03 PM

I think I have an automotive connector pin removal tool somewhere in the garage, shouldn't it be possible just to remove the pin in question from the connector body and then reconnect with it out effectively "cutting" the wire?

Then when the test is done just re-insert the pin and everything is back to normal with no evidence of tampering for warranty etc.

Just need to find my removal tool.....

GaleForce · 05-08-2012, 09:06 PM

Quote:

Originally Posted by Trilitheum

I think I have an automotive connector pin removal tool somewhere in the garage, shouldn't it be possible just to remove the pin in question from the connector body and then reconnect with it out effectively "cutting" the wire?

Then when the test is done just re-insert the pin and everything is back to normal with no evidence of tampering for warranty etc.

Just need to find my removal tool.....

Yes this should work. Sometimes you can use a flat jeweler type screwdriver for a pin removal tool.

GaleForce · 05-08-2012, 09:07 PM

Quote:

Originally Posted by LMBmikeZ

Bdl99 will have his harness ready for the few testers he has pre-arranged a beta for with his harness. As soon as these are tested everyone will know if cutting the wire works or not because it will be simulating that exact same electrical signal as if you did the cut wire method. So this will tell everyone if it does or does not work! I would wait until after this before any one does any unnecessary cutting just to safe them from possible problems. Then if it does work you can make your decision on whether to cut the wire or spend a lil $ and get the harness!?!?!?........

It would be nice if one of the Beta testers could do more investigative work other than making sure the brown wire trick works...

Mike · 05-08-2012, 11:47 PM

Quote:

Originally Posted by GaleForce

It would be nice if one of the Beta testers could do more investigative work other than making sure the brown wire trick works...

like what?

05-06-2012, 09:21 PM	#139 (permalink)
6MT A True Z Fanatic Join Date: May 2009 Location: ITU Zone 2 Posts: 22,459 Drives: Reliant Robin Rep Power: 1790	C U T T H E W I R E ! Problem solved PERIOD __________________ Andrew 2009 370Z Sport/Touring 6MT sold 2013 Honda Civic Si coupe D/D

05-08-2012, 07:49 PM	#143 (permalink)
spearfish25 A True Z Fanatic Join Date: Mar 2009 Location: Naples, FL Posts: 4,117 Drives: to work Rep Power: 1856	I can't bear reading through 10 pages so I'm just going to post. Why not just cut the brown wire, strip the ends with some length on them and leave them taped off? If you actually need to prove the lock works for some random inspection, just remove the tape and twist the stripped wires together. If you want a switch on it, just use some telephone wire taps from Radioshack on each end of the severed wire. __________________ 2013 Cadillac V-Wagon, RIP Z

05-08-2012, 08:56 PM	#146 (permalink)
LMBmikeZ A True Z Fanatic Join Date: May 2010 Location: Ontario, Canada Posts: 12,237 Drives: 40th Rep Power: 10350	Bdl99 will have his harness ready for the few testers he has pre-arranged a beta for with his harness. As soon as these are tested everyone will know if cutting the wire works or not because it will be simulating that exact same electrical signal as if you did the cut wire method. So this will tell everyone if it does or does not work! I would wait until after this before any one does any unnecessary cutting just to safe them from possible problems. Then if it does work you can make your decision on whether to cut the wire or spend a lil $ and get the harness!?!?!?........ __________________ CUSTOM NISMO \| BERK \| H&R \| STANCE \| SPL everything \| EVO-R \| 34 Setrab \| WHITELINE \| Redline \| Carkitcompany \| Zspeed \| UpRev \| SEIBON

05-08-2012, 09:03 PM	#147 (permalink)
Trilitheum Base Member Join Date: Feb 2011 Location: Ontario Posts: 210 Drives: '11 370z 6M KAD Spt Rep Power: 14	I think I have an automotive connector pin removal tool somewhere in the garage, shouldn't it be possible just to remove the pin in question from the connector body and then reconnect with it out effectively "cutting" the wire? Then when the test is done just re-insert the pin and everything is back to normal with no evidence of tampering for warranty etc. Just need to find my removal tool..... __________________ 2011 Nissan 370Z Touring/Sport, 6MT, KAD

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Steering lock failure	Terrace	Canada	52	06-16-2013 10:32 PM
Those of you who have had Steering Lock Failure	Thechidz	Nissan 370Z General Discussions	449	01-12-2013 06:05 PM
Steering Lock Elimination	Vince	Exterior & Interior	38	05-18-2012 11:43 AM
Wire ties on steering rack boot?	ferrari_rich	Nissan 370Z General Discussions	6	02-02-2010 08:56 PM
Illuminated door lock switch question	MightyBobo	Exterior & Interior	7	04-05-2009 03:23 AM

05-04-2012, 08:14 PM	#137 (permalink)
Dwight Frye Enthusiast Member Join Date: Jul 2009 Location: Occupied California Posts: 423 Drives: '09 Tour/Sport/6MT Rep Power: 16	I'll take a straight harness without a switch. I don't see the need for a switch while parking. If I want to reactivate the lock function for example, if I were to trade in or sell the car, I would reconnect the original plug. And probably leave the harness in the glovebox with a note on what it is and how to install, at the owner's risk. My '09 model's warranty expires in September and my biggest fear is that the lock will fail stranding me somewhere. Put me down for one as soon as they are available and the functioning is verified to be problem free.

05-05-2012, 03:02 PM	#138 (permalink)
kgb Base Member Join Date: Nov 2010 Location: America Posts: 15 Drives: C6 Rep Power: 15	I have been monitoring the threads relating to the failed steering locks for some time now and am definitely interested in some form of bypass mechanism. With or without the switch, I want one.