Installed Z1motorsports 25-row oil cooler

FireDan50 · 04-14-2012, 12:55 PM

I just installed the Z1Motorsports 25-row oil cooler kit with thermostatic plate and optional hose coverings. I also used Amsoil oil and filter and a magnetic drain plug. Just thought I'd share some pics and thoughts on the kit.

Everything came packaged neatly and organized and the instructions were detailed, thorough and accurate. I have never installed an oil cooler, but taking my time this took me about 3hrs going very carefully and fabricating a block off plate for cooler temps. Z1Motorsports did an awesome job with this kit and service. One thing I might suggest is them offering pre-fabricated block off plates. Its not a big deal, but might help with sales and help others save time.

shadoquad · 04-14-2012, 01:18 PM

Nice DIY. rep coming your way

MightyBobo and XwChriswX helped me do this same install a few weeks ago. Only differences were that I used Valvoline full synthetic oil, a Purolator oil filter, I had to run my lines differently due to my Injen CAI's, and I don't have thermostatic plate.

But this is a great mod. My temps haven't spiked above 190 since I installed it. Note, that's the temp of the oil after it's been through the cooler, so actual engine temp is probably closer to 220. Still, it hasn't gone past that once.

LakeShow · 04-14-2012, 02:34 PM

I'm going to need to invest in one of these soon. I'm hitting 220 in 50 degrees of normal driving.

SPOHN · 04-14-2012, 02:43 PM

If I were you I'd still get some heater hose and wrap it around the bottom oil line where it goes over the crash beam. Good install.

FireDan50 · 04-14-2012, 02:57 PM

Quote:

Originally Posted by SPOHN

If I were you I'd still get some heater hose and wrap it around the bottom oil line where it goes over the crash beam. Good install.

Yeah, I see that sharp edge now. I'll find something to guard that edge ASAP.

DEpointfive0 · 04-18-2012, 06:53 PM

Hey,
How long are the hoses???

martin82 · 04-18-2012, 08:03 PM

they are just long enough to install everything. All pre-cut to size etc. Won't be long for sure!

04-14-2012, 12:55 PM	#1 (permalink)
FireDan50 Track Member Join Date: Mar 2012 Location: San Antonio Posts: 714 Drives: '09 370Z PW M6 Rep Power: 19	Installed Z1motorsports 25-row oil cooler I just installed the Z1Motorsports 25-row oil cooler kit with thermostatic plate and optional hose coverings. I also used Amsoil oil and filter and a magnetic drain plug. Just thought I'd share some pics and thoughts on the kit. Everything came packaged neatly and organized and the instructions were detailed, thorough and accurate. I have never installed an oil cooler, but taking my time this took me about 3hrs going very carefully and fabricating a block off plate for cooler temps. Z1Motorsports did an awesome job with this kit and service. One thing I might suggest is them offering pre-fabricated block off plates. Its not a big deal, but might help with sales and help others save time.

04-14-2012, 02:34 PM	#3 (permalink)
LakeShow A True Z Fanatic Join Date: Dec 2010 Location: L.I., NY Posts: 5,307 Drives: Everything Rep Power: 26	I'm going to need to invest in one of these soon. I'm hitting 220 in 50 degrees of normal driving. __________________ \|2013 Audi S4\|Ibis White/Black\|S-Tronic P+\| \|2013 370z\|PearlWhite/Persimmon\|Touring/Sport/Nav\|F.I. CBE 18" CF\| \|Sold\|2011 370z\|Gun Metallic\|Touring/Sport/Nav\|

04-14-2012, 02:43 PM	#4 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 46 Posts: 14,844 Drives: Waiting on next Z Rep Power: 221	If I were you I'd still get some heater hose and wrap it around the bottom oil line where it goes over the crash beam. Good install. __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
z1motorsports	ichris14	Exterior & Interior	14	01-05-2011 09:57 AM
Oil Cooler Installed... comments pls.	Imperial	Engine & Drivetrain	5	10-29-2010 11:30 PM
Would you be willing to pay for an oil cooler as a factory-installed option?	semtex	Nissan 370Z General Discussions	64	10-16-2010 04:33 PM
had oil cooler installed and.....	atx370z	Nissan 370Z General Discussions	3	10-13-2010 06:49 PM
Oil cooler installed, result	cossie1600	Engine & Drivetrain	4	06-06-2010 04:32 PM

04-14-2012, 01:18 PM	#2 (permalink)
shadoquad A True Z Fanatic Join Date: Apr 2010 Location: . Posts: 42,608 Drives: . Rep Power: 3886	Nice DIY. rep coming your way MightyBobo and XwChriswX helped me do this same install a few weeks ago. Only differences were that I used Valvoline full synthetic oil, a Purolator oil filter, I had to run my lines differently due to my Injen CAI's, and I don't have thermostatic plate. But this is a great mod. My temps haven't spiked above 190 since I installed it. Note, that's the temp of the oil after it's been through the cooler, so actual engine temp is probably closer to 220. Still, it hasn't gone past that once.

04-18-2012, 06:53 PM	#6 (permalink)
DEpointfive0 Premium Member Bitches Join Date: Jan 2012 Location: SoCal Posts: 14,824 Drives: a lot Rep Power: 17151	Hey, How long are the hoses???

04-18-2012, 08:03 PM	#7 (permalink)
martin82 A True Z Fanatic Join Date: Nov 2011 Location: los angeles Posts: 2,636 Drives: 12 Nissan 370Z MB M6 Rep Power: 20	they are just long enough to install everything. All pre-cut to size etc. Won't be long for sure!