Nissan 370Z Forum  

DIY: Headlight Removal

-Follow instructions to remove the front bumper. Then pry the fender protector to get access to the harness. It is recommended to turn wheel to one side to get easy

Go Back   Nissan 370Z Forum > Nissan 370Z Tech Area > DIY Section (Do-It-Yourself)


Like Tree18Likes

Reply
 
LinkBack Thread Tools Display Modes
Old 06-06-2009, 03:35 PM   #1 (permalink)
A True Z Fanatic
 
DIGItonium's Avatar
 
Join Date: Jan 2009
Location: Kansas
Posts: 3,800
Drives: 09 Z34-TT 6MT
Rep Power: 42
DIGItonium has a reputation beyond reputeDIGItonium has a reputation beyond reputeDIGItonium has a reputation beyond reputeDIGItonium has a reputation beyond reputeDIGItonium has a reputation beyond reputeDIGItonium has a reputation beyond reputeDIGItonium has a reputation beyond reputeDIGItonium has a reputation beyond reputeDIGItonium has a reputation beyond reputeDIGItonium has a reputation beyond reputeDIGItonium has a reputation beyond repute
Post DIY: Headlight Removal

-Follow instructions to remove the front bumper. Then pry the fender protector to get access to the harness. It is recommended to turn wheel to one side to get easy access. Work on one headlight at a time, unless front wheels are removed.
-Each headlight has a main harness connector. Push lock clip in, and pull down to unplug the main connector.
-Each wire harness have zip ties with locking clips holding the harness to the headlight. Get behind the clip, squeeze the sides, and the try to unhook the harness from the headlight. It is a pain get behind it. There are two on each side to release from the headlight assembly.

Headlight removal:
1) http://www.the370z.com/attachment.php?attachmentid=23371&stc=1&d=12972150 95[/IMG]

2) This is the 7th pop rivet that separates the rubber lining to get access to one of the driver side headlight bolts.


3) This is the driver side bolt that was covered by the rubber lining. The passenger side bolt is already exposed.


4) Lightly tug the rubber lining above the headlights to get access to a bolt, pop rivet, and a plastic rivet holding the rubber lining. This one takes a bit of effort to pull.


5) The inside side of the headlight, where the rubber lining meets it, has a small pop rivet that is easy to remove. It will allow you to separate the rubber lining from the headlights and expose a few parts to separate. There is a wire harness that is hooked. Pull the harness towards the front to unhook it from the headlight. Unhook cables from the headlight as well. The passenger side is much easier to work on.


6) Remove upper side bolt holding the headlight assembly.


7) Remove the bolt underneath the headlight assembly.


You should be able to pull the headlight towards the front of the car to free it. If it takes more effort to pull the headlight free, check for snags.
Attached Images
File Type: jpg 00.jpg (64.9 KB, 1094 views)
File Type: jpg 01.jpg (167.5 KB, 6637 views)
File Type: jpg 02.jpg (156.1 KB, 6443 views)
File Type: jpg 03.jpg (151.3 KB, 6408 views)
File Type: jpg 04.jpg (141.3 KB, 6508 views)
File Type: jpg 05.jpg (166.8 KB, 6392 views)
File Type: jpg 06.jpg (158.3 KB, 6411 views)
__________________
http://www.the370z.com/image.php?type=sigpic&userid=950&dateline=13162988  42

Last edited by DIGItonium; 02-08-2011 at 08:33 PM. Reason: Embed Picture Files
DIGItonium is offline   Reply With Quote
Old 06-06-2009, 03:44 PM   #2 (permalink)
Enthusiast Member
 
miguez's Avatar
 
Join Date: Apr 2009
Location: Columbus, Ohio
Posts: 359
Drives: '04 Cavalier
Rep Power: 181
miguez has a reputation beyond reputemiguez has a reputation beyond reputemiguez has a reputation beyond reputemiguez has a reputation beyond reputemiguez has a reputation beyond reputemiguez has a reputation beyond reputemiguez has a reputation beyond reputemiguez has a reputation beyond reputemiguez has a reputation beyond reputemiguez has a reputation beyond reputemiguez has a reputation beyond repute
Default

Fantastic DIGItonium, now we just need a DIY in how to open the headlight casing!
miguez is offline   Reply With Quote
Old 06-06-2009, 05:22 PM   #3 (permalink)
Administrator
 
AK370Z's Avatar
 
Join Date: Sep 2008
Location: NJ
Posts: 9,930
Drives: 09 370Z MB Sports M6
Rep Power: 10
AK370Z has a reputation beyond reputeAK370Z has a reputation beyond reputeAK370Z has a reputation beyond reputeAK370Z has a reputation beyond reputeAK370Z has a reputation beyond reputeAK370Z has a reputation beyond reputeAK370Z has a reputation beyond reputeAK370Z has a reputation beyond reputeAK370Z has a reputation beyond reputeAK370Z has a reputation beyond reputeAK370Z has a reputation beyond repute
Default

great DIY. Thanks for posting.
__________________
The370Z Signature Pictures ll Want to rock our forum decals on your car? Then click here! ll How to Embed YouTube Videos In a Post
STOP! (Hammertime) ll Become a Premium Member Click HERE ll F.A.Q.
Are You a Nissan Dealer? Click Here to Become A "Supporting Dealer" and Start Listing Your 370Zs In Our Inventory Section
My Monterey Blue Z ll My Exhaust --> My Intake --> G3
Nissan's Official Response Regarding Oil Temp Issue: CLICK HERE
Need a Set of Cheap Winter wheels /Tires? Then Visit The Banner Link Below and Place Your Order. You'll Help Keep The370Z Alive.
AK370Z is offline   Reply With Quote
Old 06-06-2009, 11:05 PM   #4 (permalink)
A True Z Fanatic
 
DIGItonium's Avatar
 
Join Date: Jan 2009
Location: Kansas
Posts: 3,800
Drives: 09 Z34-TT 6MT
Rep Power: 42
DIGItonium has a reputation beyond reputeDIGItonium has a reputation beyond reputeDIGItonium has a reputation beyond reputeDIGItonium has a reputation beyond reputeDIGItonium has a reputation beyond reputeDIGItonium has a reputation beyond reputeDIGItonium has a reputation beyond reputeDIGItonium has a reputation beyond reputeDIGItonium has a reputation beyond reputeDIGItonium has a reputation beyond reputeDIGItonium has a reputation beyond repute
Default

Thank you. I got really tired from the heat and mosquitoes, so I missed the photos of the headlight harness.
__________________
http://www.the370z.com/image.php?type=sigpic&userid=950&dateline=13162988  42
DIGItonium is offline   Reply With Quote
Old 10-08-2010, 04:22 PM   #5 (permalink)
Enthusiast Member
 
jikhead's Avatar
 
Join Date: Jun 2009
Location: Little Rock, AR
Posts: 425
Drives: 09 370Z Blue 6spd
Rep Power: 184
jikhead has a reputation beyond reputejikhead has a reputation beyond reputejikhead has a reputation beyond reputejikhead has a reputation beyond reputejikhead has a reputation beyond reputejikhead has a reputation beyond reputejikhead has a reputation beyond reputejikhead has a reputation beyond reputejikhead has a reputation beyond reputejikhead has a reputation beyond reputejikhead has a reputation beyond repute
Default

NOTE: Take note that the 7th pop rivot mentioned above is different from the other six. This one has three edge/openings whereas the others are four. If you mistakingly used this 7th pop rivot in one of the other spots, you'll find that your last rivot in hand will not snap closed in this one spot.
jikhead is offline   Reply With Quote
Old 11-15-2010, 09:53 PM   #6 (permalink)
A True Z Fanatic
 
Jquad's Avatar
 
Join Date: Apr 2010
Location: Ny
Posts: 1,391
Drives: 2k10Z34Pw
Rep Power: 17
Jquad will become famous soon enough
Default

Great DIY ....TY sir
__________________
||F.I.CBE 18" CF muffler||Injen CAI||CF Bpillars||CF Stage 1 Side mirror||CS Amuse Kit||JquadHeadlights||3mTB35%Tint||Work Gnosis GS2||
Wish List==>||GTM TT||Coils||Camber Arms||Tires||Wing||Hotchkis Sways||
Jquad is offline   Reply With Quote
Old 11-17-2010, 02:51 PM   #7 (permalink)
Track Member
 
Pelican170's Avatar
 
Join Date: Jul 2010
Location: Sandy Hook, CT
Posts: 972
Drives: Nissan 370z Nismo
Rep Power: 16
Pelican170 is on a distinguished road
Default

Anyone know the best/easiest way to remove the Pop Rivets?
Pelican170 is offline   Reply With Quote
Old 11-18-2010, 08:38 PM   #8 (permalink)
Enthusiast Member
 
jikhead's Avatar
 
Join Date: Jun 2009
Location: Little Rock, AR
Posts: 425
Drives: 09 370Z Blue 6spd
Rep Power: 184
jikhead has a reputation beyond reputejikhead has a reputation beyond reputejikhead has a reputation beyond reputejikhead has a reputation beyond reputejikhead has a reputation beyond reputejikhead has a reputation beyond reputejikhead has a reputation beyond reputejikhead has a reputation beyond reputejikhead has a reputation beyond reputejikhead has a reputation beyond reputejikhead has a reputation beyond repute
Default

Quote:
Originally Posted by Pelican170 View Post
Anyone know the best/easiest way to remove the Pop Rivets?
Is this a real question? Do you have one stuck or something? Just use a small flathead screwdriver to pop it up and then remove by hand. Simply. Ones that are covered in dirt and have had dirt for a long time can be difficult to remove sometimes...but since our cars are new and these rivets are up high off the road, shouldn't have this problem.
jikhead is offline   Reply With Quote
Old 11-19-2010, 09:42 AM   #9 (permalink)
Track Member
 
Pelican170's Avatar
 
Join Date: Jul 2010
Location: Sandy Hook, CT
Posts: 972
Drives: Nissan 370z Nismo
Rep Power: 16
Pelican170 is on a distinguished road
Default

Quote:
Originally Posted by jikhead View Post
Is this a real question? Do you have one stuck or something? Just use a small flathead screwdriver to pop it up and then remove by hand. Simply. Ones that are covered in dirt and have had dirt for a long time can be difficult to remove sometimes...but since our cars are new and these rivets are up high off the road, shouldn't have this problem.
Uhh yes its a real question. In the past ive broken many of these and figured maybe people have a good method of doing that. Is that so strange to ask??
Pelican170 is offline   Reply With Quote
Old 01-23-2011, 04:12 PM   #10 (permalink)
Enthusiast Member
 
NISMOFO's Avatar
 
Join Date: Jan 2009
Location: McKinney, TX
Posts: 269
Drives: 370Z
Rep Power: 16
NISMOFO is on a distinguished road
Default

I wish you did more DIY's because this has great detail.

Question, when putting the lights back in, do they align perfectly...only one way? I only ask because I know on the 350Z it took some work to line them up right with the hood/fender/bumper.
NISMOFO is offline   Reply With Quote
Old 01-23-2011, 04:56 PM   #11 (permalink)
A True Z Fanatic
 
DIGItonium's Avatar
 
Join Date: Jan 2009
Location: Kansas
Posts: 3,800
Drives: 09 Z34-TT 6MT
Rep Power: 42
DIGItonium has a reputation beyond reputeDIGItonium has a reputation beyond reputeDIGItonium has a reputation beyond reputeDIGItonium has a reputation beyond reputeDIGItonium has a reputation beyond reputeDIGItonium has a reputation beyond reputeDIGItonium has a reputation beyond reputeDIGItonium has a reputation beyond reputeDIGItonium has a reputation beyond reputeDIGItonium has a reputation beyond reputeDIGItonium has a reputation beyond repute
Default

Thanks!

I never had any issues lining up the headlights. You simply line up with the screw holes. The driver side is much easier to work on. The passenger side has the window washer bottle and hoses.
__________________
http://www.the370z.com/image.php?type=sigpic&userid=950&dateline=13162988  42
DIGItonium is offline   Reply With Quote
Old 03-17-2011, 12:37 AM   #12 (permalink)
A True Z Fanatic
 
DIGItonium's Avatar
 
Join Date: Jan 2009
Location: Kansas
Posts: 3,800
Drives: 09 Z34-TT 6MT
Rep Power: 42
DIGItonium has a reputation beyond reputeDIGItonium has a reputation beyond reputeDIGItonium has a reputation beyond reputeDIGItonium has a reputation beyond reputeDIGItonium has a reputation beyond reputeDIGItonium has a reputation beyond reputeDIGItonium has a reputation beyond reputeDIGItonium has a reputation beyond reputeDIGItonium has a reputation beyond reputeDIGItonium has a reputation beyond reputeDIGItonium has a reputation beyond repute
Default

Quote:
Originally Posted by ddunk80 View Post
I have a question in adjusting the headlight bulb... mine seems looking at the trees not on the road.. pretty irritate my wife when driving at night... can you help me guys?
There is an adjustment knob that you can turn using a long neck Philips screw driver. Pop up the hood, and there is a small area for the screw driver to get in for adjustments.
__________________
http://www.the370z.com/image.php?type=sigpic&userid=950&dateline=13162988  42
DIGItonium is offline   Reply With Quote
Old 03-20-2011, 11:57 PM   #13 (permalink)
A True Z Fanatic
 
Red__Zed's Avatar
 
Join Date: Jul 2010
Location: window seat
Posts: 28,940
Drives: Mostly on two wheels
Rep Power: 120
Red__Zed has a reputation beyond reputeRed__Zed has a reputation beyond reputeRed__Zed has a reputation beyond reputeRed__Zed has a reputation beyond reputeRed__Zed has a reputation beyond reputeRed__Zed has a reputation beyond reputeRed__Zed has a reputation beyond reputeRed__Zed has a reputation beyond reputeRed__Zed has a reputation beyond reputeRed__Zed has a reputation beyond reputeRed__Zed has a reputation beyond repute
Default

good write up
Red__Zed is offline   Reply With Quote
Old 05-27-2011, 04:54 PM   #14 (permalink)
A True Z Fanatic
 
eastwest2300's Avatar
 
Join Date: May 2010
Location: South FL
Posts: 90,987
Drives: '16QX70/'21 Supra3.0
Rep Power: 2684550
eastwest2300 has a reputation beyond reputeeastwest2300 has a reputation beyond reputeeastwest2300 has a reputation beyond reputeeastwest2300 has a reputation beyond reputeeastwest2300 has a reputation beyond reputeeastwest2300 has a reputation beyond reputeeastwest2300 has a reputation beyond reputeeastwest2300 has a reputation beyond reputeeastwest2300 has a reputation beyond reputeeastwest2300 has a reputation beyond reputeeastwest2300 has a reputation beyond repute
Default

Damn, you had to take off the bumper to remove the headlights?? Icky..
__________________
Infiniti QX70 & Toyota Supra 3.0 Premium
eastwest2300 is offline   Reply With Quote
Old 05-28-2011, 12:17 AM   #15 (permalink)
A True Z Fanatic
 
DIGItonium's Avatar
 
Join Date: Jan 2009
Location: Kansas
Posts: 3,800
Drives: 09 Z34-TT 6MT
Rep Power: 42
DIGItonium has a reputation beyond reputeDIGItonium has a reputation beyond reputeDIGItonium has a reputation beyond reputeDIGItonium has a reputation beyond reputeDIGItonium has a reputation beyond reputeDIGItonium has a reputation beyond reputeDIGItonium has a reputation beyond reputeDIGItonium has a reputation beyond reputeDIGItonium has a reputation beyond reputeDIGItonium has a reputation beyond reputeDIGItonium has a reputation beyond repute
Default

Quote:
Originally Posted by eastwest2300 View Post
Damn, you had to take off the bumper to remove the headlights?? Icky..
Haha it's not that bad. I've had my bumper off again for the past couple of months getting a new set of headlights modded, and I'm about to drop it again because one of the headlights is in need of repair. The scary part is popping the bumper off from each side.
slam1918 likes this.
__________________
http://www.the370z.com/image.php?type=sigpic&userid=950&dateline=13162988  42
DIGItonium is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Bumper/headlight removal questions Slowfashow Exterior & Interior 4 01-05-2013 04:52 AM
DIY Headlight Moisture Removal Nut_N_Much DIY Section (Do-It-Yourself) 3 12-02-2012 10:46 PM
Headlight removal hyunsoo1803 Exterior & Interior 3 06-21-2012 11:53 PM
help with gum removal thispecialk Nissan 370Z General Discussions 7 08-05-2009 11:41 AM


All times are GMT -5. The time now is 04:13 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2