DIY: Headlight Removal

thelastz · 04-10-2014, 01:20 AM

i had the same problem squeezing it too but i finally got it
here is a clear pic show u how, hope it helps

forza370z · 04-13-2014, 12:52 AM

Okay removed and re-installed my headlights today. Here is my thought... If you really have a hard time to get behind the headlight units to tackle on the clip and the main connector, jack up your car take off the wheel and fender might be the easiest way. Because then you will get a full access.

jlo370z · 08-23-2014, 11:24 AM

Great DIY , got the head lights pulled in a jiffy. though i have a lot of experience removing the bumper

Corona · 05-13-2015, 09:34 PM

Used this DIY today and the work went flawlessly! Thanks for taking the time!

danegrey · 09-03-2017, 09:01 PM

Great DIY, found it very helpful today,
just a couple of differences, to the that nasty little clip, with the ziplock on it.
well I did a bit different, took a screw driver got under the little tab and pushed it out.
then I was able to lift the head light assemble out and remove the electric connector.

why, I at times get to be all thumbs when it comes to working on cars...

but this was very helpful....

04-13-2014, 12:52 AM	#32 (permalink)
forza370z A True Z Fanatic Join Date: Oct 2011 Location: 403 Forbidden Posts: 2,512 Drives: 2009 NISMO 370Z Rep Power: 19	Okay removed and re-installed my headlights today. Here is my thought... If you really have a hard time to get behind the headlight units to tackle on the clip and the main connector, jack up your car take off the wheel and fender might be the easiest way. Because then you will get a full access. __________________ 09 PW 370z Nismo \| K&N Drop Ins \| HKS Hi Power \| Berk HFCs \| Work Meister S1 3P \| Project Kics R40 Neo Chrome Lug Nuts \| KW V1 \| SPC rear camber arms/toe bolts \| Southbend Stage 3 daily clutch \| Southband 19Ib Steel Flywheel \| ZSpeed CSC

08-23-2014, 11:24 AM	#33 (permalink)
jlo370z Im a Fireball Join Date: Apr 2012 Location: Ill in noise Posts: 3,370 Drives: 11 370z Red 6spd Rep Power: 43426	Great DIY , got the head lights pulled in a jiffy. though i have a lot of experience removing the bumper __________________ ❝The Jlo370Z Build❞ 523HP \| 455 ftb tq \| 11.5 PSI \| 93 Octane *2017 Porsche 991.2 C4!l*

09-03-2017, 09:01 PM	#35 (permalink)
danegrey A True Z Fanatic Join Date: Oct 2011 Location: Knoxville Age: 71 Posts: 3,190 Drives: 12 370Z BK Cherry M6 Rep Power: 649540	Great DIY, found it very helpful today, just a couple of differences, to the that nasty little clip, with the ziplock on it. well I did a bit different, took a screw driver got under the little tab and pushed it out. then I was able to lift the head light assemble out and remove the electric connector. why, I at times get to be all thumbs when it comes to working on cars... but this was very helpful.... __________________ Lots of Changes the Z needs to be driven and driven hard for the car lives for it

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Bumper/headlight removal questions	Slowfashow	Exterior & Interior	4	01-05-2013 04:52 AM
DIY Headlight Moisture Removal	Nut_N_Much	DIY Section (Do-It-Yourself)	3	12-02-2012 10:46 PM
Headlight removal	hyunsoo1803	Exterior & Interior	3	06-21-2012 11:53 PM
help with gum removal	thispecialk	Nissan 370Z General Discussions	7	08-05-2009 11:41 AM

05-13-2015, 09:34 PM	#34 (permalink)
Corona Base Member Join Date: Feb 2015 Location: Florida Posts: 100 Drives: Nissan 370Z Rep Power: 10	Used this DIY today and the work went flawlessly! Thanks for taking the time!