DIY: Front Bumper Removal

DIGItonium · 06-06-2009, 03:05 PM

Semtex Posted the instructions below from his Photobucket, and I will post my own with photographs. The steps were not in the same order since I figured it out on my own without any complications.

1) Remove single pop rivet to ease prying the fender protector to get access to rear harness and connectors. Do the same for the other side.

2) Pry fender protector edge to get access to 10mm bolt. Do the same for the other side.

3) Remove 10 bolts underneath the bumper.

4) Lift the hood and remove 7 pop rivets holding the bumper.

5) Organization of the pop rivets and bolts for the front bumper assembly.

6) Get your hand behind the side, pull down slightly to unhook the end of the bumper where you removed the 10mm bolt from step 2 (oval cutout). Then lightly and quickly tug away from the car to unsnap the bumper from 4 hooks (rectangle cutouts). There are additional hooks underneath the headlamps. Do the same for opposite side.

7) You should be able to lift and pull the bumper from the grill area (easy to balance without any help).

miguez · 06-06-2009, 03:07 PM

Very cool, thanks!

AK370Z · 06-07-2009, 01:43 AM

Great DIY. Thanks for posting. I'm not sure what you want me do

molamann · 06-07-2009, 04:26 AM

Nice work. +rep for you sir.

Cyberium · 06-07-2009, 09:33 AM

Very well done!

+rep

DIGItonium · 06-07-2009, 03:20 PM

Quote:

Originally Posted by AK370Z

Great DIY. Thanks for posting. I'm not sure what you want me do

Hahah I copied and pasted Semtex's Photobucket link, so it is not my own.

Nikon FM · 06-07-2009, 03:29 PM

Thanks for posting the front bumper removal process. Definetely a help when I have Stillen's CAI in hand.

+1 for the simplicity and photos.

GMZ · 07-24-2009, 02:46 PM

Thanks for this, my G3 just got here!

SGTseanzie · 10-05-2009, 10:46 AM

Wow. Looks much easier than removing the bumper from the 300zx was, but then again, maybe I was going about it the wrong way!

cotizi · 10-05-2009, 11:07 AM

after doing it a few times its really easy, i can do it in under 5 min with a small air ratchet i think.

SGTseanzie · 10-05-2009, 12:55 PM

no ****. Is it just as easy putting it back on? I remember the headache i got from replacing my 300zx bumper when i bought it.

jmlenz · 11-29-2009, 01:14 AM

any suggestions on easily removing those plastic pop rivets? I just used 2 flathead screwdrivers on either side and pulled like hell. I broke about 3 of them. Is there a pop rivet puller that anyone uses? This was prob the hardest part of removing the bumper lol

yellowZ · 12-31-2009, 01:37 PM

Quote:

Originally Posted by jmlenz

any suggestions on easily removing those plastic pop rivets? I just used 2 flathead screwdrivers on either side and pulled like hell. I broke about 3 of them. Is there a pop rivet puller that anyone uses? This was prob the hardest part of removing the bumper lol

Removal:
Take a thin screwdriver or a dull awl and push in the center of the plastic pop rivet. This will allow the rivet to be removed easily.

Reinsertion:
Push the small center pin through the rivet to the top (don't remove it, but it should be sticking out of the head of the pop rivet). Push the rivet back in the hole and then press the center pin into the rivet to lock it back in place

propyl · 03-20-2010, 12:35 AM

Thanks so much for this! I did a stillen gen 3 long tube on my car tonight and got everything I needed to know about getting the bumper off from this site. You guys rock!

Forrest · 05-25-2010, 05:52 AM

little confused where is the pictures step by step?

06-07-2009, 01:43 AM	#3 (permalink)
AK370Z Administrator Join Date: Sep 2008 Location: NJ Posts: 9,930 Drives: 09 370Z MB Sports M6 Rep Power: 10	Great DIY. Thanks for posting. I'm not sure what you want me do __________________ The370Z Signature Pictures ll Want to rock our forum decals on your car? Then click here! ll How to Embed YouTube Videos In a Post STOP! (Hammertime) ll Become a Premium Member Click HERE ll F.A.Q. Are You a Nissan Dealer? Click Here to Become A "Supporting Dealer" and Start Listing Your 370Zs In Our Inventory Section My Monterey Blue Z ll My Exhaust --> My Intake --> G3 Nissan's Official Response Regarding Oil Temp Issue: CLICK HERE Need a Set of Cheap Winter wheels /Tires? Then Visit The Banner Link Below and Place Your Order. You'll Help Keep The370Z Alive.

06-07-2009, 03:29 PM	#7 (permalink)
Nikon FM Track Member Join Date: Jan 2009 Location: Snoqualmie WA Posts: 973 Drives: 03 996TT Porsche Rep Power: 606	Thanks for posting the front bumper removal process. Definetely a help when I have Stillen's CAI in hand. +1 for the simplicity and photos. __________________ Buddy Revell: "One man's sooner is another man's later"

10-05-2009, 11:07 AM	#10 (permalink)
cotizi Enthusiast Member Join Date: Mar 2009 Location: Austin, Tx Posts: 391 Drives: 2012 VW GTI 6MT Rep Power: 217	after doing it a few times its really easy, i can do it in under 5 min with a small air ratchet i think. __________________ Past - 2009 Silver 6MT Sport 370Z Current - 2012 VW GTI 6-Speed

05-25-2010, 05:52 AM	#15 (permalink)
Forrest Track Member Join Date: Mar 2009 Location: california 707! Posts: 677 Drives: 09 370z Blk 6mt sprt Rep Power: 258	little confused where is the pictures step by step? __________________ my pictures http://www.the370z.com/members/forrest-albums-370z.html

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

06-06-2009, 03:07 PM	#2 (permalink)
miguez Enthusiast Member Join Date: Apr 2009 Location: Columbus, Ohio Posts: 359 Drives: '04 Cavalier Rep Power: 181	Very cool, thanks!

06-07-2009, 04:26 AM	#4 (permalink)
molamann A True Z Fanatic Join Date: Jan 2009 Location: Los Angeles Posts: 1,666 Drives: 370Z with NAVVVVV Rep Power: 284	Nice work. +rep for you sir.

06-07-2009, 09:33 AM	#5 (permalink)
Cyberium Enthusiast Member Join Date: Mar 2009 Location: Vermont Posts: 379 Drives: 370z Touring \| Sport Rep Power: 16	Very well done! +rep

07-24-2009, 02:46 PM	#8 (permalink)
GMZ Enthusiast Member Join Date: Jun 2009 Location: Virginia Beach Posts: 304 Drives: 07 V8 4Runner 4x4 Rep Power: 16	Thanks for this, my G3 just got here!

10-05-2009, 10:46 AM	#9 (permalink)
SGTseanzie Base Member Join Date: Apr 2009 Location: Baton Rouge Posts: 176 Drives: Nada Rep Power: 16	Wow. Looks much easier than removing the bumper from the 300zx was, but then again, maybe I was going about it the wrong way!

10-05-2009, 12:55 PM	#11 (permalink)
SGTseanzie Base Member Join Date: Apr 2009 Location: Baton Rouge Posts: 176 Drives: Nada Rep Power: 16	no ****. Is it just as easy putting it back on? I remember the headache i got from replacing my 300zx bumper when i bought it.

11-29-2009, 01:14 AM	#12 (permalink)
jmlenz Track Member Join Date: May 2009 Location: San Diego Posts: 645 Drives: a car Rep Power: 643	any suggestions on easily removing those plastic pop rivets? I just used 2 flathead screwdrivers on either side and pulled like hell. I broke about 3 of them. Is there a pop rivet puller that anyone uses? This was prob the hardest part of removing the bumper lol

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Bumper/headlight removal questions	Slowfashow	Exterior & Interior	4	01-05-2013 04:52 AM
Removal of Tailights!!! Front bumper off??	jlbrenne	Nissan 370Z General Discussions	5	08-17-2012 12:28 PM
Rear bumper removal?	Reaper42	Exterior & Interior	16	05-17-2012 10:47 PM
Pop up Engine Hood indicator - After bumper removal	AH370Z	Nissan 370Z General Discussions	15	06-13-2011 12:01 PM
REQUEST: Front Bumper Removal	Cyberium	DIY Section (Do-It-Yourself)	15	07-18-2010 02:43 PM