DIY: Illuminated Kick Plates

brucelidat · 08-21-2011, 04:27 PM

nm, I found some places on google

happytheman · 08-21-2011, 05:39 PM

Quote:

Originally Posted by brucelidat

Anyone know a good site to order the kickplates or is it pretty much just form the dealer?

Check the vendor section on the home page of the370z dot com please! Support our vendors!

bigaudiofanat · 09-17-2011, 09:51 PM

What is you do not have the harness? What wires to tap other than the dome lights?

iDmac · 10-15-2011, 04:56 PM

Just installed mine! Rep to u sir!

harry370z · 11-23-2011, 04:34 AM

Just trying to install these guys, but my connector looks a bit different (or am i being a bimbo and looking in the wrong spot). In Australia the cars are right hand drive, so everythings a bit opposite. I removed the kick panel on the right hand side of the drivers seat and this is what I found.

T - Connector won't fit?

martin82 · 11-23-2011, 04:52 AM

harry the connector you are looking for should be on the left side kick panel then. Exactly opposite, you will see that the harness can only be 1 only where your remove the plug and insert the new y harness. I used a coat hanger to fish the wire behind the dash.

Powder370 · 01-19-2012, 04:52 PM

Sick! Just added to me list of things to do..!

asinow · 02-17-2012, 06:55 AM

Just Installed mine, 2011 Touring, MT. Everything was where the manual said, but they were NOT prewired. 1.5 hours being careful

happytheman · 02-17-2012, 07:27 AM

Quote:

Originally Posted by asinow

Just Installed mine, 2011 Touring, MT. Everything was where the manual said, but they were NOT prewired. 1.5 hours being careful

What was not pre wired?

ShockWave · 02-18-2012, 11:07 PM

can someone do a youtube video on this?

happytheman · 02-19-2012, 12:12 AM

Srsly? This is a really easy mod. Just take your time and enjoy yourself! Hit us up if you have any questions. I'll be happy to answer them!

ShockWave · 02-19-2012, 12:40 AM

I just don't understand the wiring stuff, whats a BCM ?

happytheman · 02-19-2012, 12:56 AM

That's the Body Control Module that's exposed once the kick panel is removed in the passenger footwell.

There's only one place that the cable for the kick plates can plug in. Once you see the BCM and compare it to the pics in the DIY it'll all click. I'm completely wiring illiterate, yet I was able to finish this mod in a little over an hour, but only because I was taking my time.

Da.Menace · 02-27-2012, 09:10 PM

Quote:

Originally Posted by ShockWave

can someone do a youtube video on this?

Gonna do a youtube vid on the install soon.

TMAN1985 · 02-29-2012, 03:42 PM

Just did this today. Took only 20-30 mins. I love the harness that it comes with, makes install super easy.

09-17-2011, 09:51 PM	#63 (permalink)
bigaudiofanat Car Audio Installer Join Date: Jun 2009 Location: Magnolia DE Posts: 8,342 Drives: 2012 Infiniti G37x Rep Power: 853	What is you do not have the harness? What wires to tap other than the dome lights? __________________ Need help with car audio or electronics? Let me know!! Need Help Let Me Know Direct email address reimermatt@gmail.com Owner of: Dynamic Mobile Audio Follow me below https://www.facebook.com/Dynamicmobileaudio/

11-23-2011, 04:34 AM	#65 (permalink)
harry370z Base Member Join Date: Sep 2011 Location: Sydney Australia Posts: 67 Drives: Nissan 370z 2010 Rep Power: 14	Just trying to install these guys, but my connector looks a bit different (or am i being a bimbo and looking in the wrong spot). In Australia the cars are right hand drive, so everythings a bit opposite. I removed the kick panel on the right hand side of the drivers seat and this is what I found. T - Connector won't fit? Last edited by harry370z; 11-23-2011 at 04:39 AM.

01-19-2012, 04:52 PM	#67 (permalink)
Powder370 Base Member Join Date: Jan 2012 Location: Austin Posts: 68 Drives: 10 PW 6MT Rep Power: 13	Sick! Just added to me list of things to do..! __________________ JWT Dual pop chargers with ModShack fang vents M3 Clear Bra

02-19-2012, 12:12 AM	#71 (permalink)
happytheman A True Z Fanatic Join Date: Apr 2010 Location: Florida Posts: 10,737 Drives: MB 6M Tour/Sport Z34 Rep Power: 1822	Srsly? This is a really easy mod. Just take your time and enjoy yourself! Hit us up if you have any questions. I'll be happy to answer them! __________________ --Brantly-- *PowderCoating by Mike/Stillen/PWJDM/Shine Auto/NST* GTR/Michelin /Fast Intentions/Evo-R/Mobil 1/Motul/Z1 https://facebook.com/CentralFloridaZClub

02-19-2012, 12:56 AM	#73 (permalink)
happytheman A True Z Fanatic Join Date: Apr 2010 Location: Florida Posts: 10,737 Drives: MB 6M Tour/Sport Z34 Rep Power: 1822	That's the Body Control Module that's exposed once the kick panel is removed in the passenger footwell. There's only one place that the cable for the kick plates can plug in. Once you see the BCM and compare it to the pics in the DIY it'll all click. I'm completely wiring illiterate, yet I was able to finish this mod in a little over an hour, but only because I was taking my time. __________________ --Brantly-- *PowderCoating by Mike/Stillen/PWJDM/Shine Auto/NST* GTR/Michelin /Fast Intentions/Evo-R/Mobil 1/Motul/Z1 https://facebook.com/CentralFloridaZClub Last edited by happytheman; 02-19-2012 at 01:02 AM.

08-21-2011, 04:27 PM	#61 (permalink)
brucelidat A True Z Fanatic Join Date: Jun 2011 Location: temple city, ca Posts: 2,432 Drives: 2011 370z 7AT GM Sp Rep Power: 31	nm, I found some places on google

10-15-2011, 04:56 PM	#64 (permalink)
iDmac Base Member Join Date: Jul 2011 Location: Visalia, CA Posts: 113 Drives: 2010 370z Base 6MT Rep Power: 14	Just installed mine! Rep to u sir!

11-23-2011, 04:52 AM	#66 (permalink)
martin82 A True Z Fanatic Join Date: Nov 2011 Location: los angeles Posts: 2,636 Drives: 12 Nissan 370Z MB M6 Rep Power: 20	harry the connector you are looking for should be on the left side kick panel then. Exactly opposite, you will see that the harness can only be 1 only where your remove the plug and insert the new y harness. I used a coat hanger to fish the wire behind the dash.

02-17-2012, 06:55 AM	#68 (permalink)
asinow Base Member Join Date: Nov 2011 Location: MD Posts: 7 Drives: 11 Z T BK MT Nav Rep Power: 13	Just Installed mine, 2011 Touring, MT. Everything was where the manual said, but they were NOT prewired. 1.5 hours being careful

02-18-2012, 11:07 PM	#70 (permalink)
ShockWave Enthusiast Member Join Date: Dec 2011 Location: houston Posts: 303 Drives: 350z Rep Power: 13	can someone do a youtube video on this?

02-19-2012, 12:40 AM	#72 (permalink)
ShockWave Enthusiast Member Join Date: Dec 2011 Location: houston Posts: 303 Drives: 350z Rep Power: 13	I just don't understand the wiring stuff, whats a BCM ?

02-29-2012, 03:42 PM	#75 (permalink)
TMAN1985 Enthusiast Member Join Date: Aug 2011 Location: Fort Myers, FL Posts: 296 Drives: 09 Touring/Sport/Nav Rep Power: 14	Just did this today. Took only 20-30 mins. I love the harness that it comes with, makes install super easy. __________________ HKS HI-POWER EXHAUST\|Stillen Gen 3 Intake\|Berk HFC\|UpRev tune\|Swift SPEC-R Springs\|H&R Spacers\|EVO-R Lip\|EVO-R High Wing\|SPC Front/Rear Camber Arms\|Hardwired Escort 9500ix

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[WTB] Illuminated Kick Plates	pfdaxe	Parts for sale (Private Classifieds)	9	10-11-2012 07:58 AM
Illuminated kick plates always on?	KptKIDLAT	Exterior & Interior	15	08-30-2012 11:08 PM
WTB: Illuminated Kick Plates	Boost_lee	Wanted	0	01-30-2011 04:28 PM
Illuminated Kick Plates	KptKIDLAT	DIY Section (Do-It-Yourself)	3	08-29-2010 09:53 AM
Illuminated Kick Plates	twotonezed	Parts for sale (Private Classifieds)	7	06-22-2010 01:53 AM