DIY: Triple Gauge Cluster

martin82 · 11-24-2012, 08:49 AM

Where can I tap into for rpm signal wire my datalogger (iq3) needs signal.... Thanks!

Maddog483 · 03-02-2013, 09:19 PM

hmmm looks like i will be getting 2 more guages and doing this at a later date
got a boost gauge to go with the GTM SC install but if i am gonna bother sounds like i should do all three.

awesome info gang exactly what i wanted to know!!

Mitco39 · 03-02-2013, 10:48 PM

Here is a link to my gauge install, used a very similar method to this DIY and changed a few things as I went.

Mitco39's Build

JMac88 · 03-02-2013, 11:39 PM

very similar to the way I installed mine, i used a long piece of aluminum, drilled 3 holes and jb welded the lock nuts on. I find the fact that all 3 gauges are on the one long piece locks them all in place well

Cell · 06-29-2013, 04:34 PM

What kind of hook did you guys use to get the gauges out?

GaleForce · 06-29-2013, 05:00 PM

Quote:

Originally Posted by Cell

What kind of hook did you guys use to get the gauges out?

I used this set,

Arrvaxx · 08-19-2013, 05:17 PM

Am I reading this correctly...the gauge clusters are 60mm and not 62mm. So the GReddy Multi D/A Gauges (62mm) won't fit? GReddy

GaleForce · 08-19-2013, 05:59 PM

Quote:

Originally Posted by Arrvaxx

Am I reading this correctly...the gauge clusters are 60mm and not 62mm. So the GReddy Multi D/A Gauges (62mm) won't fit? GReddy

You will be hard pressed to fit a 62mm gauge in the factory location. Depending on the depth of the gauge it could be done but will need extensive modifications. You also will lose the silver trim ring.

My gauges are 52mm and they were a tight fit.

IMG_8032 by J M Gale, on Flickr

Arrvaxx · 08-19-2013, 08:14 PM

Hm, damn. Thanks.

I really want multi gauges. More looking for me!

Akbubba47 · 08-19-2013, 08:21 PM

Bump for future reference

Arrvaxx · 08-19-2013, 08:38 PM

Hm. May have to go this route. If it is quick connect maybe I can pull it out at the track?

Edge Insight Multi-Gauge Display Monitor

L33T Z34 · 05-25-2014, 09:20 PM

When I replaced my useless triple meter w/Défis I just wedged my three big fingers under the plastic hoods, which is the darker plastic that touches the dash. Don't pull on the visors, they will break off easily from the hoods. Once you get your three big fingers wedged under the front (closer to the windshield) hood and dash, just pull back towards where you're seated like a mothafawker and the whole thing will give- hood, visor and probably the bezel too! No need to use hook/pick. Do @ your own hood/bezel risk!

Attached is my demoed triple meter.

Part numbers for these POS:
Triple meter - 24845-1EA1A
Left hood - 68112-1EA0A
Center hood – 68113-1EA0A
Right hood – 68114-1EA0A
Bezel (all same) - 68236-1EA0A

xxAGAVExx · 06-16-2014, 11:11 AM

Sub'd, great info

Sent from my iPhone using Tapatalk

andrewbennett · 08-01-2014, 10:37 AM

To anyone using prosport gauges, how are they holding up?

Gregor12 · 10-17-2014, 04:08 PM

Do you know which wire is the dimming wire for the factory gauge harness. Thanks

Phil

03-02-2013, 09:19 PM	#32 (permalink)
Maddog483 Base Member Join Date: Mar 2012 Location: Alberta, Canada Posts: 19 Drives: 11 370z Sport M6 Rep Power: 13	hmmm looks like i will be getting 2 more guages and doing this at a later date got a boost gauge to go with the GTM SC install but if i am gonna bother sounds like i should do all three. awesome info gang exactly what i wanted to know!! Catspaw likes this.

03-02-2013, 10:48 PM	#33 (permalink)
Mitco39 A True Z Fanatic Join Date: Aug 2012 Location: Edmonton Alberta Canada Posts: 2,089 Drives: 40th 370z Rep Power: 132	Here is a link to my gauge install, used a very similar method to this DIY and changed a few things as I went. Mitco39's Build MONZT3R likes this. __________________ 2007 Chevy Duramax - EFILive Tuned By Me 2010 40th W/ Nav - Boosted Performance - UpRev Tuned By Me The Mrs. Ride -2012 335XI N55 BMW - Cobb Tuned By Me, Built by her My Build --> http://www.the370z.com/members-370z-...39s-build.html

03-02-2013, 11:39 PM	#34 (permalink)
JMac88 Enthusiast Member Join Date: Jun 2010 Location: Edmonton AB Posts: 416 Drives: 2010 PW 370z Rep Power: 15	very similar to the way I installed mine, i used a long piece of aluminum, drilled 3 holes and jb welded the lock nuts on. I find the fact that all 3 gauges are on the one long piece locks them all in place well Mitco39 likes this. __________________ Full Mod List

08-19-2013, 05:17 PM	#37 (permalink)
Arrvaxx A True Z Fanatic Join Date: Jul 2013 Location: Whore Island, MN Posts: 1,243 Drives: 40th F.I. Twin Turbo Rep Power: 18	Am I reading this correctly...the gauge clusters are 60mm and not 62mm. So the GReddy Multi D/A Gauges (62mm) won't fit? GReddy __________________ 2010 370Z 40th Anniversary (#480 born 1/19/2010) Fast Intentions Twin Turbo \| Varis Arising II \| Limited Edition Recaro Sportster \| Tuned by Specialty Z \| 604hp 525 torque @14lbs boost on 100 octane

08-19-2013, 08:14 PM	#39 (permalink)
Arrvaxx A True Z Fanatic Join Date: Jul 2013 Location: Whore Island, MN Posts: 1,243 Drives: 40th F.I. Twin Turbo Rep Power: 18	Hm, damn. Thanks. I really want multi gauges. More looking for me! __________________ 2010 370Z 40th Anniversary (#480 born 1/19/2010) Fast Intentions Twin Turbo \| Varis Arising II \| Limited Edition Recaro Sportster \| Tuned by Specialty Z \| 604hp 525 torque @14lbs boost on 100 octane

11-24-2012, 08:49 AM	#31 (permalink)
martin82 A True Z Fanatic Join Date: Nov 2011 Location: los angeles Posts: 2,636 Drives: 12 Nissan 370Z MB M6 Rep Power: 20	Where can I tap into for rpm signal wire my datalogger (iq3) needs signal.... Thanks!

06-29-2013, 04:34 PM	#35 (permalink)
Cell A True Z Fanatic Join Date: Jan 2010 Location: Chicago Posts: 1,449 Drives: A Garbage Truck Rep Power: 21	What kind of hook did you guys use to get the gauges out?

08-19-2013, 08:21 PM	#40 (permalink)
Akbubba47 Enthusiast Member Join Date: Dec 2012 Location: Fort Lee NJ Posts: 304 Drives: 2009 PW 6sp touring Rep Power: 13	Bump for future reference __________________ 2009 PW Touring. 6sp, Volk TE37's, MXP catback, and high flow cats.

08-19-2013, 08:38 PM	#41 (permalink)
Arrvaxx A True Z Fanatic Join Date: Jul 2013 Location: Whore Island, MN Posts: 1,243 Drives: 40th F.I. Twin Turbo Rep Power: 18	Hm. May have to go this route. If it is quick connect maybe I can pull it out at the track? Edge Insight Multi-Gauge Display Monitor __________________ 2010 370Z 40th Anniversary (#480 born 1/19/2010) Fast Intentions Twin Turbo \| Varis Arising II \| Limited Edition Recaro Sportster \| Tuned by Specialty Z \| 604hp 525 torque @14lbs boost on 100 octane

06-16-2014, 11:11 AM	#43 (permalink)
xxAGAVExx A True Z Fanatic Join Date: Nov 2012 Location: Tampa Posts: 1,036 Drives: 09 370Z BLK M6 Rep Power: 53925	Sub'd, great info Sent from my iPhone using Tapatalk __________________ l 09/6MT l BP Twin Turbo Kit l E-85 w/Fuel Return l FI 18" Res CF CBE l Powertrix Ultra-Lite Coilovers l Wavetrac LSD \| Lots of SPL and Carbon Fiber \|

08-01-2014, 10:37 AM	#44 (permalink)
andrewbennett Base Member Join Date: Apr 2014 Location: Murfreesboro TN Posts: 183 Drives: '14 MR 6MT Sport Rep Power: 11	To anyone using prosport gauges, how are they holding up?

10-17-2014, 04:08 PM	#45 (permalink)
Gregor12 Enthusiast Member Join Date: Oct 2013 Location: CHARLOTTE, NC Posts: 433 Drives: 2012 370z 6mt sport Rep Power: 12	Do you know which wire is the dimming wire for the factory gauge harness. Thanks Phil

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Just swapped the triple meter OEM gauge	JP-370Z	Exterior & Interior	59	02-13-2021 02:44 PM
triple gauge covers	soldknow	Exterior & Interior	5	01-30-2011 01:03 PM
WTB: Gauge Cluster	Push370zzz	Parts for sale (Private Classifieds)	4	10-14-2010 05:44 PM
WTB: Gauge Cluster	Push370zzz	Wanted	0	10-14-2010 04:28 PM
What happened to the tire pressure gauge and speedo in the middle gauge cluster?	rbratton	Nissan 370Z General Discussions	33	01-24-2009 11:28 PM