DIY: Battery Relo

wstar · 06-01-2009, 09:20 PM

Quote:

Originally Posted by CBRich

Are there any special considerations due to mounting the battery on it's side?

Not with the battery I used (the Odyssey PC680). The manual states that any mounting position other than inverted (as in, battery terminals facing the floor) is good.

wstar · 06-01-2009, 09:43 PM

Apparently my DMM must be too slow to see the cranking amps through the clamp. It does work for DC, I could see the amps moving around in a reasonable range as I turned headlights on/off, etc. But I tried to measure engine start 3 times, and the highest it ever briefly flicked to was 18A, which is way too low. The meter simply lacks the responsiveness.

barncobob · 02-13-2017, 12:31 PM

battery + connections right atop the gas tank,,let me think on this one a minute...

06-01-2009, 09:43 PM	#2 (permalink)
wstar A True Z Fanatic Join Date: Mar 2009 Location: Houston, TX Posts: 4,024 Drives: too slow Rep Power: 3595	Apparently my DMM must be too slow to see the cranking amps through the clamp. It does work for DC, I could see the amps moving around in a reasonable range as I turned headlights on/off, etc. But I tried to measure engine start 3 times, and the highest it ever briefly flicked to was 18A, which is way too low. The meter simply lacks the responsiveness. __________________ 7AT Track Car! Journal thread / Car setup details

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Break in miles? Reset battery,computer? help	AceSpade77	Nissan 370Z General Discussions	2	04-26-2009 01:07 AM

02-13-2017, 12:31 PM	#3 (permalink)
barncobob A True Z Fanatic Join Date: Sep 2015 Location: hangtown, CA Posts: 1,164 Drives: 16 370Z auto Rep Power: 590	battery + connections right atop the gas tank,,let me think on this one a minute...