DIY: Tips on Installing K&N Typhoon CAI

SalA · 09-10-2012, 10:19 AM

Thanks Man..I found your added instructions very helpful. Just a general comment to the thread...Everything was as the instructions suggested...The driver side crank case venting outlet takes the two 3" rubber tubing as a 90 degree setup..and that is a good fit. The instructions state to use the 7" tubing "as is" for the passenger side crank case vent. You just cannot install the 7" piece without a sever kink..As you stated it must be cut to size....Approximately 3" should do it...but measure first.

I immediately felt a difference in response and sound. A really good modification for the money and effort!!

alcheng · 09-10-2012, 03:23 PM

Quote:

Originally Posted by The Z monster

Hey did u ever get any hissing noises after u installed it? I keep hearing this hissing noise and I don't know if it's the intakes or what. It's aggravating.

Yes... there's a slight hissing noise at certain range, I've checked the hose and clamps and they are all tight, it is normal from the filters.

Quote:

Originally Posted by SalA

Thanks Man..I found your added instructions very helpful. Just a general comment to the thread...Everything was as the instructions suggested...The driver side crank case venting outlet takes the two 3" rubber tubing as a 90 degree setup..and that is a good fit. The instructions state to use the 7" tubing "as is" for the passenger side crank case vent. You just cannot install the 7" piece without a sever kink..As you stated it must be cut to size....Approximately 3" should do it...but measure first.

I immediately felt a difference in response and sound. A really good modification for the money and effort!!

Great, I am glad you found my write up is useful!! What's the next mods???

SalA · 09-10-2012, 04:03 PM

Quote:

Originally Posted by alcheng

Yes... there's a slight hissing noise at certain range, I've checked the hose and clamps and they are all tight, it is normal from the filters.

Great, I am glad you found my write up is useful!! What's the next mods???

Exhaust would be the next mod..Stillen is a strong consideration.

alcheng · 09-10-2012, 06:39 PM

Quote:

Originally Posted by SalA

Exhaust would be the next mod..Stillen is a strong consideration.

Fast Intention and ARK Grip are very good too.

The Z monster · 09-10-2012, 07:08 PM

[QUOTE=alcheng;1910223]Yes... there's a slight hissing noise at certain range, I've checked the hose and clamps and they are all tight, it is normal from the filters.

Oh ok. It almost sounds like its leaking right but then it stops? It was drivin me nuts but if u hear it too then Idc anymore lol

Bodytechz · 04-09-2013, 09:56 AM

Installed FI's over the weekend and will be installing the K & N Typhoon very soon. Will be interested to hear if it improves the already AWESOME sound of my Fast Intentions. I'm going to have the Typhoon tubes powder coated before I install them, will post pics after.

sparky · 04-09-2013, 10:08 PM

Quote:

Originally Posted by Bodytechz

Installed FI's over the weekend and will be installing the K & N Typhoon very soon. Will be interested to hear if it improves the already AWESOME sound of my Fast Intentions. I'm going to have the Typhoon tubes powder coated before I install them, will post pics after.

This is my setup too and I'm happy with it. The intake is mostly for the sound though and maybe a better throttle response. Goes together nicely with the FI!

alcheng · 04-10-2013, 02:00 AM

Quote:

Originally Posted by Bodytechz

Installed FI's over the weekend and will be installing the K & N Typhoon very soon. Will be interested to hear if it improves the already AWESOME sound of my Fast Intentions. I'm going to have the Typhoon tubes powder coated before I install them, will post pics after.

I have installed the intake first, then the Ark Grip couple months after.

The CBE is kinda louder than the intake and it does cover the sound from the intake...

So good luck trying to hear the note from both side...

Quote:

Originally Posted by sparky

This is my setup too and I'm happy with it. The intake is mostly for the sound though and maybe a better throttle response. Goes together nicely with the FI!

FI has one of the best CBE note for the Z

Bodytechz · 04-11-2013, 04:06 PM

Powder coated K&N's and the look, sound and response feel is Awesome with my FI's

alcheng · 04-11-2013, 04:56 PM

Quote:

Originally Posted by Bodytechz

Powder coated K&N's and the look, sound and response feel is Awesome with my FI's

Color turns out

Bodytechz · 04-11-2013, 05:41 PM

Quote:

Originally Posted by alcheng

Color turns out

Thanks, going with a Superman theme

Nuccigucci · 06-07-2013, 09:47 PM

Quote:

Originally Posted by alcheng

Go for the ARK, must better brand and quality. I got mine from one of the vendor here, I live in Canada, everything shipped under $1200. Very good deal

If you are interested, send me a PM and I can forward the contact to you.

by any chance is the deal for the ARK grip still available?

alcheng · 06-07-2013, 09:53 PM

Quote:

Originally Posted by Nuccigucci

by any chance is the deal for the ARK grip still available?

Look up FBNISSAN

Very nice people and good price

xxgary81xx · 12-17-2014, 11:03 PM

I been reading forum postings about the typhoon for months. I currently have invidia cbe and just installed it yesterday. It sounds amazing. There are way to many reviews on these forums that get way to detailed. I can care less about a million specs and comparisons. Bottom line it sounds good and I do feel a difference.

Mr_Wond3rful · 04-21-2015, 12:56 PM

I've got a pretty decent rate with my mechanic. Approx how long to install?

09-10-2012, 10:19 AM	#16 (permalink)
SalA Base Member Join Date: Mar 2010 Location: Milton, GA Posts: 247 Drives: 17 Nissan GT-R Rep Power: 16	Thanks Man..I found your added instructions very helpful. Just a general comment to the thread...Everything was as the instructions suggested...The driver side crank case venting outlet takes the two 3" rubber tubing as a 90 degree setup..and that is a good fit. The instructions state to use the 7" tubing "as is" for the passenger side crank case vent. You just cannot install the 7" piece without a sever kink..As you stated it must be cut to size....Approximately 3" should do it...but measure first. I immediately felt a difference in response and sound. A really good modification for the money and effort!! __________________ 2017 Pearl White GT-R Premium \|Full Bolt-On E85 From Speed by Design\|

09-10-2012, 07:08 PM	#20 (permalink)
The Z monster Enthusiast Member Join Date: Oct 2011 Location: Port saint lucie, FL Posts: 326 Drives: 2012 370Z Grey A/T Rep Power: 14	[QUOTE=alcheng;1910223]Yes... there's a slight hissing noise at certain range, I've checked the hose and clamps and they are all tight, it is normal from the filters. Oh ok. It almost sounds like its leaking right but then it stops? It was drivin me nuts but if u hear it too then Idc anymore lol __________________ window tint - LIGHTNING HAMMER INSTA-CHARGER (600whp proven)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] K&N Typhoon cold air	bigrob126	Parts for sale (Private Classifieds)	3	07-07-2011 03:00 AM
FYI K&N Typhoon	dragonsoul198	Intake/Exhaust	17	06-02-2011 11:44 AM
K and n typhoon 14.2hp ????	ddvette9	Intake/Exhaust	3	03-21-2011 11:58 PM
WTB K&N Typhoon CAI	Econ	Wanted	0	02-25-2011 10:25 AM
WTB: K&N Typhoon Intake	omgZ	Wanted	0	01-18-2011 02:08 AM

04-09-2013, 09:56 AM	#21 (permalink)
Bodytechz Enthusiast Member Join Date: Jan 2011 Location: Illinois Posts: 253 Drives: '11 MB NISMO #0008 Rep Power: 15	Installed FI's over the weekend and will be installing the K & N Typhoon very soon. Will be interested to hear if it improves the already AWESOME sound of my Fast Intentions. I'm going to have the Typhoon tubes powder coated before I install them, will post pics after.

12-17-2014, 11:03 PM	#29 (permalink)
xxgary81xx Base Member Join Date: Oct 2014 Location: hudson county nj Posts: 53 Drives: 2010 370z Rep Power: 11	I been reading forum postings about the typhoon for months. I currently have invidia cbe and just installed it yesterday. It sounds amazing. There are way to many reviews on these forums that get way to detailed. I can care less about a million specs and comparisons. Bottom line it sounds good and I do feel a difference.

04-21-2015, 12:56 PM	#30 (permalink)
Mr_Wond3rful Base Member Join Date: Feb 2015 Location: Dallas, TX Posts: 17 Drives: 370Z Rep Power: 11	I've got a pretty decent rate with my mechanic. Approx how long to install?