![]() |
good question indeed...
|
![]() |
|
LinkBack | Thread Tools | Display Modes |
![]() |
#437 (permalink) | |
A True Z Fanatic
![]() Join Date: Mar 2009
Location: North East
Posts: 6,203
Drives: 09 370Z Sport M6
Rep Power: 653 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
![]() Quote:
Redundancy yes. Both switches must agree otherwise it's a lock-out state.
__________________
Hotchkis ARB | Stillen CAI | Art Pipes | Berk CBE | Stillen AP Racing Brakes | AE Performance Oil Cooler | BC Racing ER Coilovers | Doran Control Arms |
|
![]() |
![]() |
![]() |
#439 (permalink) |
A True Z Fanatic
![]() Join Date: Mar 2009
Location: North East
Posts: 6,203
Drives: 09 370Z Sport M6
Rep Power: 653 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
![]()
Yes, there are 2 outputs from the steering lock with opposite signal voltages feeding the BCM on pins 97 & 98, so it would actually be A & (!B). I think you could just hardwire to the unlock status and it should work, pin 97 12V, pin 98 GND - you would still get the key signal though but at least it would work and you don't risk burning out the expensive BCM (unless you screw up the wiring).
__________________
Hotchkis ARB | Stillen CAI | Art Pipes | Berk CBE | Stillen AP Racing Brakes | AE Performance Oil Cooler | BC Racing ER Coilovers | Doran Control Arms |
![]() |
![]() |
![]() |
#440 (permalink) |
Base Member
Join Date: Aug 2010
Location: Andorre
Posts: 90
Drives: 2010 370Z M6
Rep Power: 16 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
![]()
I tackle electronics from the "end user of the circuit(s)". Maybe you find my new thread "Steering Lock: cut a wire..etc" of interest...learned from all the circuit board connections within the lock itself. Hope it helps.
Fritz |
![]() |
![]() |
![]() |
#443 (permalink) |
A True Z Fanatic
![]() Join Date: Apr 2010
Location: Florida
Posts: 10,737
Drives: MB 6M Tour/Sport Z34
Rep Power: 1822 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
![]()
Crap! Mine just broke!
![]() At least my car is in the garage, the steering wheel isn't locked and it's still under warranty. ![]()
__________________
--Brantly-- PowderCoating by Mike/Stillen/PWJDM/Shine Auto/NST
GTR/Michelin /Fast Intentions/Evo-R/Mobil 1/Motul/Z1 https://facebook.com/CentralFloridaZClub ![]() |
![]() |
![]() |
![]() |
#444 (permalink) | |
A True Z Fanatic
![]() Join Date: Aug 2011
Location: Ontario, Canada
Posts: 21,749
Drives: Varis Arising II
Rep Power: 51865 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
![]() Quote:
![]()
__________________
![]() |
|
![]() |
![]() |
![]() |
#445 (permalink) |
A True Z Fanatic
![]() Join Date: Aug 2009
Location: N/A
Posts: 76,801
Drives: N/A
Rep Power: 141521 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
![]()
oh noes, happy.
![]() ![]() i would call up the dealer and let them know what happened...and if you're up to the task, replace it yourself. they can order you a new part, probably. |
![]() |
![]() |
![]() |
#447 (permalink) | |
A True Z Fanatic
![]() Join Date: Apr 2010
Location: Florida
Posts: 10,737
Drives: MB 6M Tour/Sport Z34
Rep Power: 1822 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
![]()
Yah, I'm still under warranty. I'm thinking I might ask my tech about just getting me the part so I can replace it myself, but not so sure how I'd work out the whole loaner bit if I don't take her in? My Z is my DD.
![]() Quote:
![]()
__________________
--Brantly-- PowderCoating by Mike/Stillen/PWJDM/Shine Auto/NST
GTR/Michelin /Fast Intentions/Evo-R/Mobil 1/Motul/Z1 https://facebook.com/CentralFloridaZClub ![]() Last edited by happytheman; 04-21-2012 at 08:45 PM. |
|
![]() |
![]() |
![]() |
#448 (permalink) | |
Enthusiast Member
![]() Join Date: Feb 2012
Location: In the shop
Posts: 281
Drives: Women Crazy
Rep Power: 13 ![]() ![]() |
![]() Quote:
Steering Lock: cut one wire. /switch optional |
|
![]() |
![]() |
![]() |
#449 (permalink) |
A True Z Fanatic
![]() Join Date: Apr 2010
Location: Florida
Posts: 10,737
Drives: MB 6M Tour/Sport Z34
Rep Power: 1822 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
![]()
I'm a bit skeered to snip wires in my car.
![]()
__________________
--Brantly-- PowderCoating by Mike/Stillen/PWJDM/Shine Auto/NST
GTR/Michelin /Fast Intentions/Evo-R/Mobil 1/Motul/Z1 https://facebook.com/CentralFloridaZClub ![]() |
![]() |
![]() |
![]() |
Bookmarks |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Just joined the "Dreaded Steering Lock Club" | Timotay | New Forum Member | 2 | 03-06-2013 05:40 PM |
Need a steering lock assembly!! | bfowlzr33 | Wanted | 8 | 01-02-2013 05:40 PM |
Dreaded steering lock | Jim Roberts | Exterior & Interior | 2 | 12-12-2012 04:08 PM |
Steering lock repair | fritz | DIY Section (Do-It-Yourself) | 38 | 02-22-2012 10:30 PM |