DIY: Nissan 370Z Oil change (AK370Z way) Pictures inside

semtex · 06-16-2009, 04:52 PM

So AK, have you noticed any perceptible difference running on Redline? I've heard that there's a very noticeable difference with Motul, so I'm wondering if the same holds true for Redline. Some people claim that the VQ doesn't do well on Motul as far as wear goes. So now I'm trying to decide whether to go ahead and use the 3 cans of Motul 300V already sitting in my garage, or give Redline a try instead. Redline is definitely less expensive and easier to get a hold of.

AK370Z · 06-16-2009, 05:43 PM

Quote:

Originally Posted by semtex

So AK, have you noticed any perceptible difference running on Redline? I've heard that there's a very noticeable difference with Motul, so I'm wondering if the same holds true for Redline. Some people claim that the VQ doesn't do well on Motul as far as wear goes. So now I'm trying to decide whether to go ahead and use the 3 cans of Motul 300V already sitting in my garage, or give Redline a try instead. Redline is definitely less expensive and easier to get a hold of.

I don't track my Z (I haven't yet) and I have never ran Motul in (any of) my Z. . So, I really can't give you a clear feedback. But it seems to do it's job. I felt the idle was a lot smoother. I say use those Motul cans in your Garage. Once they are finish, give Redline a try. They are both in the same catagory (Group 5). You might not see too much difference.

Sonic370Z · 06-16-2009, 07:38 PM

Quote:

Originally Posted by Chan Chee Hoe

I noticed the OEM oil filter is made in China,why.?Japan cannot make oil Filter.?

just changed the oil for the first time and no matter how hard I tried I couldn't get the damn thing off. screw driver through the middle of the damn thing took it right off.

anyhow, my original oil filter says made in Japan. my local dealer that I purchased 2 replacement oil filters from say made in China. I also noticed that the oil filter they gave me is slightly longer (maybe 1/2 inch) than the OEM one?

part number of the original Nissan filter: 15208-65FOB (Japan)
part number of the Nissan filter the dealer sold me: 15208-9E000 (China)

and from the looks of AK's pictures, his was 15208-65FOC (China)

thoughts?

Sonic370Z · 06-16-2009, 08:35 PM

Quote:

Originally Posted by ZzzZz

Why not just remove the 4 bolts at the bottom of the cover. Notice there's that fold/crease about 8 inches up from the bottom? I believe that's what the designers intended that to be.

I just do that instead of removing the entire cover as removing 19 fasteners is overkill.

Quote:

Originally Posted by AK370Z

Removing the 4 bolts doesn't quite give you access to neither oil filter nor drain plug because they are situated a little deeper than that . I'm sure you can try and do it but if you can buy a motorized screwdriver ($10 shipped EBAY), it makes your life a whole lot easier.

???

I took the whole thing off, but as I was putting it back on I thought to myself, "I wonder..." sure enough there is plenty of room. of the section that folds down (requiring you to only remove the 4 bolts) the drain bolt is dead center of that flap and the oil filter just above it. I had plenty of space to change the filter and drain the oil with just the flap down? anyone who goes to change their oil take a look at it first and see if you have room to work (since you have to remove those 4 bolts anyway).

Sonic370Z · 06-16-2009, 08:53 PM

Quote:

Originally Posted by Sonic370Z

just changed the oil for the first time and no matter how hard I tried I couldn't get the damn thing off. screw driver through the middle of the damn thing took it right off.

anyhow, my original oil filter says made in Japan. my local dealer that I purchased 2 replacement oil filters from say made in China. I also noticed that the oil filter they gave me is slightly longer (maybe 1/2 inch) than the OEM one?

part number of the original Nissan filter: 15208-65FOB (Japan)
part number of the Nissan filter the dealer sold me: 15208-9E000 (China)

and from the looks of AK's pictures, his was 15208-65FOC (China)

thoughts?

picture: (and yes, I had to use a damn screw driver because I had already drained the oil, couldn't go to store to get a new tool, lol)

miguez · 06-16-2009, 09:09 PM

Amazing what we can come up with when necessity presses its head in

Sonic, check this out as far as filters go, just FYI.

MursePaolo · 06-17-2009, 03:32 PM

the cover's not a big deal. i don't know if any of you have changed the oil in an Integra GS-R motor, but the filter placement sucks! looking at this, i take a sigh of relief! can't wait!

Forrest · 06-18-2009, 05:26 PM

Quote:

Originally Posted by semtex

So AK, have you noticed any perceptible difference running on Redline? I've heard that there's a very noticeable difference with Motul, so I'm wondering if the same holds true for Redline. Some people claim that the VQ doesn't do well on Motul as far as wear goes. So now I'm trying to decide whether to go ahead and use the 3 cans of Motul 300V already sitting in my garage, or give Redline a try instead. Redline is definitely less expensive and easier to get a hold of.

You should try Motul 300V for a little bit and do the black stone lab test on it.

Free Test Kit

My plan is very simple, i want to test to see how well the nissan ester oil wears on the engine for a few changes then switch it to something else and see if theres less wear.

BUt i need to change my own oil and i am slowly gearing up to do that, but since i am a slow driver i have a few miles to go before oil change, i am also kind of afraid to do it too.

AK you should test your redline also with black labs.

Oh yeah and i was thinking. the magnet on the filter and the drain pan bolt magnet would probably alter the test becuase they would be cleaning the oil for you more so than normal. All that crap that is breaking off, would normaly cause more wear that the magnet stops it from doing. I dunno, you get what i am saying i hope.

semtex · 06-18-2009, 05:49 PM

Yeah that's the plan -- I already have the Blackstone stuff in my garage. Problem is I work from home and just don't drive that much (not that I'm complaining, mind you). I've had my Z since Jan.9 and I only now just reached 3100 miles! So it'll be a while!

Forrest · 06-19-2009, 04:58 AM

Well i have had mine since march 7th and i just put 3k miles on mine too, i drive to work and its 3 miles away hahah so im in the same boat as you almost.

i am hoping i man up(change the oil my self) so i can get some UOA done on the ester oil so we can all learn and compare.

I will hold off on the magnets until i am done sampling oils and find one thats good then i will magnet that one.

MursePaolo · 06-19-2009, 10:16 AM

Has anyone tried Torco? I've been running it in my integra. It's pretty awesome.

VCuomo · 06-19-2009, 01:49 PM

Quote:

Originally Posted by MursePaolo

Has anyone tried Torco? I've been running it in my integra. It's pretty awesome.

OK, I'll bite... What's so "awesome" about Torco?

MursePaolo · 06-19-2009, 08:45 PM

Quote:

Originally Posted by VCuomo

OK, I'll bite... What's so "awesome" about Torco?

Welcome to TORCO ADVANCED LUBRICANTS Website 2007

i've no clue about the technical data, but switching over from Mobil-1, my car just felt more "willing" to go. sort of like how your body feels when you're well fed and energized as opposed to hungry and tired.

Crash · 06-19-2009, 08:52 PM

Wow.... That's a lot of stuff to remove to get to the oil filter! Good thing it's synthetic!!!

I change my oil every month. If I had to pull all that crap off just to get to the filter, I'd wait the entire 3000 miles.

wstar · 06-19-2009, 10:56 PM

Quote:

Originally Posted by Sonic370Z

???

I took the whole thing off, but as I was putting it back on I thought to myself, "I wonder..." sure enough there is plenty of room. of the section that folds down (requiring you to only remove the 4 bolts) the drain bolt is dead center of that flap and the oil filter just above it. I had plenty of space to change the filter and drain the oil with just the flap down? anyone who goes to change their oil take a look at it first and see if you have room to work (since you have to remove those 4 bolts anyway).

Just saw this, nice find there. Definitely going to try the "only 4 bolts" method on my next change, which is coming up in about 500 miles (probably end of next week, or middle of the one after).

06-16-2009, 04:52 PM	#61 (permalink)
semtex A True Z Fanatic Join Date: Jan 2009 Location: Behind enemy lines Age: 54 Posts: 5,995 Drives: People to drink Rep Power: 32	So AK, have you noticed any perceptible difference running on Redline? I've heard that there's a very noticeable difference with Motul, so I'm wondering if the same holds true for Redline. Some people claim that the VQ doesn't do well on Motul as far as wear goes. So now I'm trying to decide whether to go ahead and use the 3 cans of Motul 300V already sitting in my garage, or give Redline a try instead. Redline is definitely less expensive and easier to get a hold of. __________________ "There are no small accidents on this circuit." -- Ayrton Senna 316.8whp & 248 ft/lbs (Dyno Dynamics) \| 319whp & 256 ft/lbs (DynoJet) (04/23/10) Stillen G3 CAI, CBE, Pulley / F.I. LTH / GTSpec Ladder Brace / Setrab Oil Cooler / UpRev-tuned by Forged Perf.

06-18-2009, 05:49 PM	#69 (permalink)
semtex A True Z Fanatic Join Date: Jan 2009 Location: Behind enemy lines Age: 54 Posts: 5,995 Drives: People to drink Rep Power: 32	Yeah that's the plan -- I already have the Blackstone stuff in my garage. Problem is I work from home and just don't drive that much (not that I'm complaining, mind you). I've had my Z since Jan.9 and I only now just reached 3100 miles! So it'll be a while! __________________ "There are no small accidents on this circuit." -- Ayrton Senna 316.8whp & 248 ft/lbs (Dyno Dynamics) \| 319whp & 256 ft/lbs (DynoJet) (04/23/10) Stillen G3 CAI, CBE, Pulley / F.I. LTH / GTSpec Ladder Brace / Setrab Oil Cooler / UpRev-tuned by Forged Perf.

06-19-2009, 08:52 PM	#74 (permalink)
Crash A True Z Fanatic Join Date: Dec 2008 Location: Los Angeles Posts: 1,853 Drives: 02 Corvette Z06 Rep Power: 590	Wow.... That's a lot of stuff to remove to get to the oil filter! Good thing it's synthetic!!! I change my oil every month. If I had to pull all that crap off just to get to the filter, I'd wait the entire 3000 miles. __________________ 2002 Corvette Z06 - Totaled 2003 Corvette Z06 50th Anniversary

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Headlight Mod for 370z - Real Pictures Inside	nogoodname	Exterior & Interior	190	02-20-2012 03:36 PM
AK370Z's Monterey Blue 370Z	AK370Z	Member's 370Z Gallery	144	09-20-2010 04:28 PM
Nissan 370Z Convertible pictures Leaked? 01.24.09	AK370Z	Nissan 370Z General Discussions	7	01-24-2009 06:46 AM
Edmunds.com: 2009 Nissan 370Z Inside Line Party and Video 11.16.08	AK370Z	Nissan 370Z Photos / Spyshots / Video / Media Gallery	9	11-19-2008 12:19 PM
Nissan USA releases Official Nissan 370Z pictures 10.29.08	AK370Z	Nissan 370Z Photos / Spyshots / Video / Media Gallery	15	11-10-2008 09:17 AM

06-16-2009, 09:09 PM	#66 (permalink)
miguez Enthusiast Member Join Date: Apr 2009 Location: Columbus, Ohio Posts: 359 Drives: '04 Cavalier Rep Power: 181	Amazing what we can come up with when necessity presses its head in Sonic, check this out as far as filters go, just FYI.

06-17-2009, 03:32 PM	#67 (permalink)
MursePaolo Base Member Join Date: Jun 2009 Location: Glendale, CA Posts: 34 Drives: 98 Integra GS-R Rep Power: 16	the cover's not a big deal. i don't know if any of you have changed the oil in an Integra GS-R motor, but the filter placement sucks! looking at this, i take a sigh of relief! can't wait!

06-19-2009, 04:58 AM	#70 (permalink)
Forrest Track Member Join Date: Mar 2009 Location: california 707! Posts: 677 Drives: 09 370z Blk 6mt sprt Rep Power: 258	Well i have had mine since march 7th and i just put 3k miles on mine too, i drive to work and its 3 miles away hahah so im in the same boat as you almost. i am hoping i man up(change the oil my self) so i can get some UOA done on the ester oil so we can all learn and compare. I will hold off on the magnets until i am done sampling oils and find one thats good then i will magnet that one.

06-19-2009, 10:16 AM	#71 (permalink)
MursePaolo Base Member Join Date: Jun 2009 Location: Glendale, CA Posts: 34 Drives: 98 Integra GS-R Rep Power: 16	Has anyone tried Torco? I've been running it in my integra. It's pretty awesome.