DIY: Nissan 370Z Oil change (AK370Z way) Pictures inside

ChrisSlicks · 04-14-2011, 03:24 PM

Quote:

Originally Posted by 370zproject

iv been useing the k&n so would the K&n hp 1010? be the best

Yes. Even with an oil cooler sandwich plate it fits with ease.

onzedge · 04-14-2011, 03:37 PM

Quote:

Originally Posted by ChrisSlicks

Yes. Even with an oil cooler sandwich plate it fits with ease.

370zproject · 04-15-2011, 02:45 AM

so no modding needed ? (i got the 1010)

wstar · 04-15-2011, 08:08 AM

Quote:

Originally Posted by 370zproject

so no modding needed ? (i got the 1010)

No mods needed for the HP-1010, or any of the other mfg's longer filters either. Like ChrisSlicks said, I run the HP-1010 on top of a thermo sandwich plate with no probs.

onzedge · 04-15-2011, 10:02 AM

Quote:

Originally Posted by wstar

No mods needed for the HP-1010, or any of the other mfg's longer filters either. Like ChrisSlicks said, I run the HP-1010 on top of a thermo sandwich plate with no probs.

I run the same one on a Mocal sandwich plate -- no problemo.

370zproject · 04-16-2011, 12:35 AM

do i need a plate?

wstar · 04-16-2011, 02:32 AM

Quote:

Originally Posted by 370zproject

do i need a plate?

No. We're just pointing out that even *with* a sandwich plate (which adds additional length), the filter still fits. It will fit by an even greater margin without one.

zmyride · 04-16-2011, 06:28 PM

AK, thx for thewriteup.

I did my 1st oil chnage today at 5000 miles. Ive had the car for a year and 4 months now. First oil change done at the dealer at 2100 miles back in sept.

I use mobil one 5w30 with filter magnet and KN filter. I dont use magnetic plug i think its overkill. Imho.

I bought the rhino ramp but i think next time im going to buy the raceramp instead. Car too low for rhino ramps so i had to use some wooden boards but the ramps kept slinding.

I only put 5 qts of oil in. Manual says 5 and 1/8. I wondered if it makes any difference.

Ive never do oil change in any of my prevous cars. I just took it to the dealersip. Now that ive done my first oil change i reaaly like it im going to do all oil change at home from now on.

Sorry for typos. Typed via two finger on ipad.

FricFrac · 04-17-2011, 03:44 AM

Quote:

Originally Posted by wstar

Just getting caught up after a long hiatus. Re: larger filters, another option is the K&N HP-1010, that's what I've been using for a long time now on my 370.

The various compatible PL and K&N filters differ in length, but I'm not sure if K&N's height numbers include the little nut they put on the top for easier removal. These are the mfg spec lengths in any case:

HP-1008: 2.86in
PL14610: 2.93in
PL14612: 3.52in
HP-1010: 3.73in

Don't forget the Wix 51357 is roughly the same size as the PL14612 at 3.4in

DIY: Nissan 370Z Oil change (AK370Z way) Pictures inside

370zproject · 04-18-2011, 01:00 AM

how much is a new oil pan apparently the magnetic nut is striping the pan

Billarf · 04-18-2011, 08:22 AM

Instead of the magnetized oil pan drain plug consider going with a FilterMag SS250 Oil Filter Magnet versus that small surface area, magnetized drain plug. Also, rather then fooling with a drain plug at all/ risking oil pan plug stripping, consider replacing your stock drain plug with a Fumoto valve..the best.... if you want to attach a hose to the Fumoto do order a Fumoto that has a nipple on it for hose attachment. (not all Fumoto's have a nipple) Futmoto's part# will have an "N" in it indicating "nipple" if it has a nipple. The Fumoto comes with a fiber gasket. Use the included gasket alone on the install.

For the '09 - '11 370Z use the F103N Fumoto valve.

Best place to buy price wise is from an eBAY vendor. They do not leak and are very well made. A terrific adjunct. 8-) I've used them on numerous vehicles over the last few years.

vifferman · 04-18-2011, 05:43 PM

What dimension boards did you use and how did you place them (as a riser in front of the ramps (per AK's original post), or overlaying the ramps as an extension? I already have Rhino ramps, and intend to place back-to-back 2x4's at the ramps' front to raise the Z's front (sans air deflectors) enough to approach the ramps without any contact. AK built "steps" and said they were a bit too high, so I propose to simply lay two boards side-by-side in front of the ramps, with some rubber matting beneath the ramps to prevent sliding. What think thee?

gr8-wrx · 04-18-2011, 07:42 PM

Thank you OP for the awesome writeup!

ZForce · 04-19-2011, 02:31 AM

Quote:

Originally Posted by 370zproject

how much is a new oil pan apparently the magnetic nut is striping the pan

ouch...sorry to hear man. My aluminun Titek magnetic oil drain plug stripped out on the first oil drain.

Aluminum does not mix well with a steel oil pan, hence the stripping. My pan was saved as the plug was stripped.

Since then I have gone with Dimple steel magnetic drain plug, it has more magnetic strength than aluminum.

http://www.drainplugmagnets.com/

.

370zproject · 04-19-2011, 02:34 AM

hmm maybe its just the plug lol

04-15-2011, 02:45 AM	#498 (permalink)
370zproject A True Z Fanatic Join Date: Jul 2009 Location: Memphis Age: 35 Posts: 16,104 Drives: 09 A/T 370z blue Rep Power: 53	so no modding needed ? (i got the 1010) __________________ Brake Upgrade Package ate blue, hawk hp ceramic pads, and slotted rotors

04-16-2011, 12:35 AM	#501 (permalink)
370zproject A True Z Fanatic Join Date: Jul 2009 Location: Memphis Age: 35 Posts: 16,104 Drives: 09 A/T 370z blue Rep Power: 53	do i need a plate? __________________ Brake Upgrade Package ate blue, hawk hp ceramic pads, and slotted rotors

04-18-2011, 01:00 AM	#505 (permalink)
370zproject A True Z Fanatic Join Date: Jul 2009 Location: Memphis Age: 35 Posts: 16,104 Drives: 09 A/T 370z blue Rep Power: 53	how much is a new oil pan apparently the magnetic nut is striping the pan __________________ Brake Upgrade Package ate blue, hawk hp ceramic pads, and slotted rotors

04-18-2011, 07:42 PM	#508 (permalink)
gr8-wrx Track Member Join Date: Apr 2011 Location: Nor Cal Posts: 611 Drives: 10 370z Roadster 7AT Rep Power: 15	Thank you OP for the awesome writeup! __________________ Me: 2022 Toyota Tacoma SR5 Double-Cab SB Wifey: 2013 Toyota Highlander Limited AWD Weekends: 2010 Nissan 370z Roadster

04-19-2011, 02:34 AM	#510 (permalink)
370zproject A True Z Fanatic Join Date: Jul 2009 Location: Memphis Age: 35 Posts: 16,104 Drives: 09 A/T 370z blue Rep Power: 53	hmm maybe its just the plug lol __________________ Brake Upgrade Package ate blue, hawk hp ceramic pads, and slotted rotors

04-16-2011, 06:28 PM	#503 (permalink)
zmyride Track Member Join Date: Nov 2009 Location: SF Bay Area Posts: 631 Drives: 10 Black Sports 7AT Rep Power: 17	AK, thx for thewriteup. I did my 1st oil chnage today at 5000 miles. Ive had the car for a year and 4 months now. First oil change done at the dealer at 2100 miles back in sept. I use mobil one 5w30 with filter magnet and KN filter. I dont use magnetic plug i think its overkill. Imho. I bought the rhino ramp but i think next time im going to buy the raceramp instead. Car too low for rhino ramps so i had to use some wooden boards but the ramps kept slinding. I only put 5 qts of oil in. Manual says 5 and 1/8. I wondered if it makes any difference. Ive never do oil change in any of my prevous cars. I just took it to the dealersip. Now that ive done my first oil change i reaaly like it im going to do all oil change at home from now on. Sorry for typos. Typed via two finger on ipad.

04-18-2011, 08:22 AM	#506 (permalink)
Billarf Base Member Join Date: Mar 2010 Location: NY Posts: 132 Drives: . Rep Power: 15	Instead of the magnetized oil pan drain plug consider going with a FilterMag SS250 Oil Filter Magnet versus that small surface area, magnetized drain plug. Also, rather then fooling with a drain plug at all/ risking oil pan plug stripping, consider replacing your stock drain plug with a Fumoto valve..the best.... if you want to attach a hose to the Fumoto do order a Fumoto that has a nipple on it for hose attachment. (not all Fumoto's have a nipple) Futmoto's part# will have an "N" in it indicating "nipple" if it has a nipple. The Fumoto comes with a fiber gasket. Use the included gasket alone on the install. For the '09 - '11 370Z use the F103N Fumoto valve. Best place to buy price wise is from an eBAY vendor. They do not leak and are very well made. A terrific adjunct. 8-) I've used them on numerous vehicles over the last few years.

04-18-2011, 05:43 PM	#507 (permalink)
vifferman Base Member Join Date: Jul 2009 Location: Ohio Posts: 62 Drives: '04 TSX, '10 370ZR Rep Power: 16	What dimension boards did you use and how did you place them (as a riser in front of the ramps (per AK's original post), or overlaying the ramps as an extension? I already have Rhino ramps, and intend to place back-to-back 2x4's at the ramps' front to raise the Z's front (sans air deflectors) enough to approach the ramps without any contact. AK built "steps" and said they were a bit too high, so I propose to simply lay two boards side-by-side in front of the ramps, with some rubber matting beneath the ramps to prevent sliding. What think thee?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Headlight Mod for 370z - Real Pictures Inside	nogoodname	Exterior & Interior	190	02-20-2012 03:36 PM
AK370Z's Monterey Blue 370Z	AK370Z	Member's 370Z Gallery	144	09-20-2010 04:28 PM
Nissan 370Z Convertible pictures Leaked? 01.24.09	AK370Z	Nissan 370Z General Discussions	7	01-24-2009 06:46 AM
Edmunds.com: 2009 Nissan 370Z Inside Line Party and Video 11.16.08	AK370Z	Nissan 370Z Photos / Spyshots / Video / Media Gallery	9	11-19-2008 12:19 PM
Nissan USA releases Official Nissan 370Z pictures 10.29.08	AK370Z	Nissan 370Z Photos / Spyshots / Video / Media Gallery	15	11-10-2008 09:17 AM