DIY: Nissan 370Z Oil change (AK370Z way) Pictures inside

gordonb50 · 07-22-2012, 10:44 AM

I would suggest calling the dealer. I'm sure they will answer your questions.

I just purchased a used 2010 Z about a month ago, and the paperwork I found stated the dealer serviced the car, including an oil & filter change. My first thought was what kind of oil & filter they used. Rather than worrying about it, I called them to get the true answer. Without hesitation, they gave me oil type & filter type.

Good luck.....

danelonson · 07-26-2012, 03:55 PM

I will be doing my first oil change this weekend and purchased a Mobil 1 jug that contains 5.28 US Qts. My question is: If I use the whole jug would I overfill my engine with oil? I know the recommended is 5.125 but I think I would have a hard time estimating that exact amount. It doesn't seem like a difference of 0.155 Qts is much but I could be wrong and don't want to damage my engine. Sorry for the newb question guys.

I have always changed the oil on my motorcycle but since its exactly 3 quarts, its a little easier (no measuring required).

Thanks,

kenchan · 07-26-2012, 04:15 PM

i use the 5qt mobil1 silver cap. i just pour the whole thing in and it's perfect.

the filter sucks in a little bit of oil so should be fine.

when i drain the old oil, i let it drip a good 15-20min.

onzedge · 07-26-2012, 04:20 PM

Quote:

Originally Posted by kenchan

i use the 5qt mobil1 silver cap. i just pour the whole thing in and it's perfect.

the filter sucks in a little bit of oil so should be fine.

when i drain the old oil, i let it drip a good 15-20min.

Mr. Kenchan is corrrect.

danelonson · 07-26-2012, 04:35 PM

I did notice that at autozone (the one I purchased) they have the 5.28 US Qt silver cap and in walmart they have the same bottle with the same cap but is 5.1 US Qt. Where are you guys purchasing the bottle?

danelonson · 07-26-2012, 04:37 PM

Sorry saw it in Kmart not walmart

kenchan · 07-26-2012, 04:39 PM

walmart for me.

i recommend you buy the 5qt jug and one 1qt bottle in case you need to add later.
the engine eats oil when new. should stop eating around 10k miles.

danelonson · 07-26-2012, 04:50 PM

Thanks Kenchan for your help. Just checked walmart website and the 5w-30 pic they show of the bottle says exactly 5 Qts.

So confused. I'll just take your advice and let it drain for a good 20 min and pour the whole thing.

kenchan · 07-26-2012, 05:43 PM

Quote:

Originally Posted by danelonson

Thanks Kenchan for your help. Just checked walmart website and the 5w-30 pic they show of the bottle says exactly 5 Qts.

So confused. I'll just take your advice and let it drain for a good 20 min and pour the whole thing.

sounds good. that's wat ive been doing the last 3yrs.

Gauge · 07-27-2012, 11:24 AM

The link for the drain plug is dead for me, is there anywhere to get that drain plug, I like the red color

rikkiphan1506 · 07-30-2012, 03:35 AM

Hi admin,
this is Rikki and I have a couple questions about changing oil. I have bought might nismo for about 3,000miles and i might have to change oil in another 3k or 4k miles so I m looking to learn how to change oil. These are what we need that u have posted to be able to change our oil. Do we have to buy all these stuff (except MOTOR OIL and OIL FILTER of course) everytime we change our oil? And what is the function of the FIlterMag Oil Filter Magnet? I know u must be very busy but if u have any chance to answer my questions that would be great.

Redline Synthetic Motor oil (5W 30)
K&N Oil filter
Magnetic drain plug Size:
FilterMag Oil Filter Magnet
Copper drain plug washer

Thanks

Gauge · 07-30-2012, 09:48 AM

Quote:

Originally Posted by rikkiphan1506

Hi admin,
this is Rikki and I have a couple questions about changing oil. I have bought might nismo for about 3,000miles and i might have to change oil in another 3k or 4k miles so I m looking to learn how to change oil. These are what we need that u have posted to be able to change our oil. Do we have to buy all these stuff (except MOTOR OIL and OIL FILTER of course) everytime we change our oil? And what is the function of the FIlterMag Oil Filter Magnet? I know u must be very busy but if u have any chance to answer my questions that would be great.

Redline Synthetic Motor oil (5W 30)
K&N Oil filter
Magnetic drain plug Size:
FilterMag Oil Filter Magnet
Copper drain plug washer

Thanks

On the list you will need the oil (of course), the oil filter, and the copper drain plug washer. The magnetic plug and filter magnet should be reusable for as long as you own the car I would imagine.

I'm no expert on magnets, but they do get weaker over time, but it takes a VERY long time. So you shouldn't need to buy another set.

wstar · 07-30-2012, 11:05 AM

The curie temp for Neodymium (used in a filtermag) is around 600F (or higher, depending on the exact variant). If the magnet were regularly exposed to temps in excess of the curie temp, that would significantly and permanently remove its magnetism in a relatively short period of time. At lesser temperatures you can see *some* loss of magnetism temporarily, which is restored when it cools. I'm not sure how much Nd loses at typical oil temps, but probably not much.

Heat effects aside, if it's just sitting there stuck to some iron (or pulling light fragments of iron from oil), it would take a long time for it to significantly degrade. I'd guess the useful life of a FilterMag to be at least 10 years before you could tell the difference from a fresh one, could be much longer than that even.

redevo5 · 08-28-2012, 02:14 PM

Excellent post AK & thanks for going to al the trouble. It's exactly this type of thing that makes these Forums so helpful and invaluable.

Reminds me of a number of years ago now, when I used to frequently use an almost identical Forum when I owned by Evo5.

danelonson · 08-29-2012, 07:29 PM

I changed my oil about 2 weeks ago and poured exactly 5.28 Quarts of Mobil 1 oil. I let it drain about 25 minutes before I poured the oil. Today after a 1 hour drive I let the car sit for about 2 hours and when I checked the dipstick, the oil level is on the H and can't tell but think its actually higher than that. Did I put too much oil? I thought this amount would be ok. Please help, I have noticed higher oil temperatures than before, I used to barely reach 220 and now I regularly reach that. Is it because of too much oil?

07-27-2012, 11:24 AM	#625 (permalink)
Gauge Track Member Join Date: Sep 2011 Location: Madison WI Posts: 867 Drives: 2012 370Z Nismo PW Rep Power: 15	The link for the drain plug is dead for me, is there anywhere to get that drain plug, I like the red color __________________ I am a demon bolt slayer.

07-30-2012, 03:35 AM	#626 (permalink)
rikkiphan1506 Base Member Join Date: May 2012 Location: San jose Posts: 131 Drives: 09 Nissan 370z Nismo Rep Power: 13	question about changing oil Hi admin, this is Rikki and I have a couple questions about changing oil. I have bought might nismo for about 3,000miles and i might have to change oil in another 3k or 4k miles so I m looking to learn how to change oil. These are what we need that u have posted to be able to change our oil. Do we have to buy all these stuff (except MOTOR OIL and OIL FILTER of course) everytime we change our oil? And what is the function of the FIlterMag Oil Filter Magnet? I know u must be very busy but if u have any chance to answer my questions that would be great. Redline Synthetic Motor oil (5W 30) K&N Oil filter Magnetic drain plug Size: FilterMag Oil Filter Magnet Copper drain plug washer Thanks

07-30-2012, 11:05 AM	#628 (permalink)
wstar A True Z Fanatic Join Date: Mar 2009 Location: Houston, TX Posts: 4,024 Drives: too slow Rep Power: 3594	The curie temp for Neodymium (used in a filtermag) is around 600F (or higher, depending on the exact variant). If the magnet were regularly exposed to temps in excess of the curie temp, that would significantly and permanently remove its magnetism in a relatively short period of time. At lesser temperatures you can see some loss of magnetism temporarily, which is restored when it cools. I'm not sure how much Nd loses at typical oil temps, but probably not much. Heat effects aside, if it's just sitting there stuck to some iron (or pulling light fragments of iron from oil), it would take a long time for it to significantly degrade. I'd guess the useful life of a FilterMag to be at least 10 years before you could tell the difference from a fresh one, could be much longer than that even. __________________ 7AT Track Car! Journal thread / Car setup details

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Headlight Mod for 370z - Real Pictures Inside	nogoodname	Exterior & Interior	190	02-20-2012 03:36 PM
AK370Z's Monterey Blue 370Z	AK370Z	Member's 370Z Gallery	144	09-20-2010 04:28 PM
Nissan 370Z Convertible pictures Leaked? 01.24.09	AK370Z	Nissan 370Z General Discussions	7	01-24-2009 06:46 AM
Edmunds.com: 2009 Nissan 370Z Inside Line Party and Video 11.16.08	AK370Z	Nissan 370Z Photos / Spyshots / Video / Media Gallery	9	11-19-2008 12:19 PM
Nissan USA releases Official Nissan 370Z pictures 10.29.08	AK370Z	Nissan 370Z Photos / Spyshots / Video / Media Gallery	15	11-10-2008 09:17 AM

07-22-2012, 10:44 AM	#616 (permalink)
gordonb50 Base Member Join Date: Nov 2011 Location: Longview, Texas Posts: 4 Drives: 2010 370Z Touring Rep Power: 13	I would suggest calling the dealer. I'm sure they will answer your questions. I just purchased a used 2010 Z about a month ago, and the paperwork I found stated the dealer serviced the car, including an oil & filter change. My first thought was what kind of oil & filter they used. Rather than worrying about it, I called them to get the true answer. Without hesitation, they gave me oil type & filter type. Good luck.....

07-26-2012, 03:55 PM	#617 (permalink)
danelonson Base Member Join Date: Apr 2012 Location: Florida Posts: 82 Drives: 12 370z 7AT Sport Rep Power: 13	I will be doing my first oil change this weekend and purchased a Mobil 1 jug that contains 5.28 US Qts. My question is: If I use the whole jug would I overfill my engine with oil? I know the recommended is 5.125 but I think I would have a hard time estimating that exact amount. It doesn't seem like a difference of 0.155 Qts is much but I could be wrong and don't want to damage my engine. Sorry for the newb question guys. I have always changed the oil on my motorcycle but since its exactly 3 quarts, its a little easier (no measuring required). Thanks,

07-26-2012, 04:15 PM	#618 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	i use the 5qt mobil1 silver cap. i just pour the whole thing in and it's perfect. the filter sucks in a little bit of oil so should be fine. when i drain the old oil, i let it drip a good 15-20min.

07-26-2012, 04:35 PM	#620 (permalink)
danelonson Base Member Join Date: Apr 2012 Location: Florida Posts: 82 Drives: 12 370z 7AT Sport Rep Power: 13	I did notice that at autozone (the one I purchased) they have the 5.28 US Qt silver cap and in walmart they have the same bottle with the same cap but is 5.1 US Qt. Where are you guys purchasing the bottle?

07-26-2012, 04:37 PM	#621 (permalink)
danelonson Base Member Join Date: Apr 2012 Location: Florida Posts: 82 Drives: 12 370z 7AT Sport Rep Power: 13	Sorry saw it in Kmart not walmart

07-26-2012, 04:39 PM	#622 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	walmart for me. i recommend you buy the 5qt jug and one 1qt bottle in case you need to add later. the engine eats oil when new. should stop eating around 10k miles.

07-26-2012, 04:50 PM	#623 (permalink)
danelonson Base Member Join Date: Apr 2012 Location: Florida Posts: 82 Drives: 12 370z 7AT Sport Rep Power: 13	Thanks Kenchan for your help. Just checked walmart website and the 5w-30 pic they show of the bottle says exactly 5 Qts. So confused. I'll just take your advice and let it drain for a good 20 min and pour the whole thing.

08-28-2012, 02:14 PM	#629 (permalink)
redevo5 Base Member Join Date: Aug 2012 Location: texas Posts: 4 Drives: 2009 370z auto Rep Power: 13	Excellent post AK & thanks for going to al the trouble. It's exactly this type of thing that makes these Forums so helpful and invaluable. Reminds me of a number of years ago now, when I used to frequently use an almost identical Forum when I owned by Evo5.

08-29-2012, 07:29 PM	#630 (permalink)
danelonson Base Member Join Date: Apr 2012 Location: Florida Posts: 82 Drives: 12 370z 7AT Sport Rep Power: 13	I changed my oil about 2 weeks ago and poured exactly 5.28 Quarts of Mobil 1 oil. I let it drain about 25 minutes before I poured the oil. Today after a 1 hour drive I let the car sit for about 2 hours and when I checked the dipstick, the oil level is on the H and can't tell but think its actually higher than that. Did I put too much oil? I thought this amount would be ok. Please help, I have noticed higher oil temperatures than before, I used to barely reach 220 and now I regularly reach that. Is it because of too much oil?