DIY: Nissan 370Z Oil change (AK370Z way) Pictures inside

vipor · 12-08-2009, 09:46 AM

Quote:

Originally Posted by zmyride

^ Jason, Jake, and AK

I think you guys worry too much. I leave my car in the dealer for one hour and I could see them work on my car from the waiting room. Are you guys afraid they're going to take your car for a joyride if they finish your car early?

I went to the Nissan dealer and talked to the service manager yesterday. He said an oil change on a Z costs $39. No need to use ester or synthetic oil. Its way cheaper than changing the oil yourself.

I would not take a Z to pepboys to local gas station for an oil change. A cheap car, yes, but not a Z.

There is never a need for synthetic, although it is supposed to be better for your car and definitely does allow more driving between changes. If you stricktly adhere to the 3k rule then conventional oil will do just fine. The way I look at it though is if the oil is double the price, but you're changing it half as often, you aren't just breaking even, you're saving the price of a filter per 6k miles.

ResQguy · 12-09-2009, 01:13 AM

Ridiculous noob question here. I always thought you were supposed to change the oil when it was cool?

AK370Z · 12-09-2009, 01:59 AM

Quote:

Originally Posted by ResQguy

Ridiculous noob question here. I always thought you were supposed to change the oil when it was cool?

Usually you just need to warm the car up for a few minutes for regular oil change BUT if you're taking sample for laboratories to do oil analysis, you have to follow this Gas Sampling

Quote:

Run the engine before you take the sample to get the oil at operating temperature (driving about 20 minutes should do it). Getting the oil up to operating temperature should help cook out any normal moisture or fuel build-up.
.........

vipor · 12-09-2009, 10:01 AM

i just usually go to the store let it be to pick up the oil or filter or grab some food. making sure the temp led is around the 1/3 point and the oil temp is up near 160ish. this is when some "thickies" gloves come in handy. i've been burned by oil before, not fun.

ResQguy · 12-09-2009, 10:55 AM

Thanks guys.

Jason · 12-09-2009, 12:04 PM

Quote:

Originally Posted by zmyride

^ Jason, Jake, and AK

I think you guys worry too much. I leave my car in the dealer for one hour and I could see them work on my car from the waiting room. Are you guys afraid they're going to take your car for a joyride if they finish your car early?

I went to the Nissan dealer and talked to the service manager yesterday. He said an oil change on a Z costs $39. No need to use ester or synthetic oil. Its way cheaper than changing the oil yourself.

I would not take a Z to pepboys to local gas station for an oil change. A cheap car, yes, but not a Z.

maybe in zville everyone is sincere. miami's full of crooks and lazy people. most dealers here are huge and the service area is away from the waiting room. i dont know about there, but here most service techs are kids in high school or just graduated from making minimum wage. they're still in that high school mentality and are oblivious to how hard someone has to work to afford a $35-40k car and therefore have no respect for it.

i'll pay the ~$10 over what you pay and change it myself with the ester oil and not have to worry about someone tokyo drifting my car.

Zcott · 12-09-2009, 06:23 PM

The last time a dealer touched one of my vehicles (a Toyota Tacoma) was to fix something they did after a cheap oil change and tire rotation.

They over torqued the lugs so much, they had to DRILL two of them off the next time I took it in. They damaged the wheel in the process and had to give me a new one.

No thanks...
I can change my oil in less than an hour, and I KNOW it's been done correctly.

Of course I like tinkering, so it's fun for me...

G Fo12ce · 12-14-2009, 07:19 PM

I'm about 1/2 way through my break in and decided to install a filter magnet. Like AK I had this idea when I got the car but I was having trouble finding something that looked like a good product. Thanks for pointing the way AK! I got the HP250 FilterMag:

[IMG]

[/IMG]

I'll be installing this drain bolt by Peak Performance one the first change:

Quote:

Peak Performance Oil drain bolt consists of a super neodymium magnet, aluminum crush washer, and a high quality zinc coated steel plug.

Neodymium magnets are made with the world's most powerful permanent magnetic material. Rare Earth magnets have a high resistance to demagnetization, unlike most other types of magnets. They will not lose their magnetization if rubbed against other materials or dropped. The Neodymium magnets are 10X stronger than most ceramic magnets, so the size of the magnet can be decreased and maintain great magnetism. The only draw back of neodymium magnets are their high costs, we have been able to combat that by buying these magnets in large quantities.

Keep the metal away from the other moving parts in the engine. Those small metal pieces can cause great a lot of damage in high horsepower vehicles. This magnetic oil drain plug is a excellent investment at $9.

Thanks for the great write up!

AK just curious do you plan to cut open the filter and see if any crap is stuck to it? I have an air compressor and I'm tempted to go get a cheap pneumatic cutting wheel to cut mine open and see if I got anything after break in lol.

AK370Z · 12-15-2009, 12:28 AM

Quote:

Originally Posted by G Fo12ce

Thanks for pointing the way AK! I got the HP250 FilterMag:

http://i238.photobucket.com/albums/f...Z/IMG_3580.jpg

AK just curious do you plan to cut open the filter and see if any crap is stuck to it? I have an air compressor and I'm tempted to go get a cheap pneumatic cutting wheel to cut mine open and see if I got anything after break in lol.

Very nice. Congrats on your first oil change. You went with the more powerful magnet option HP model (I have SS which is one grade below).

Upon my 1st oil change, I found metal shavings on the drain bolt. I was SO TEMPTED to open up the filter but I had no tools do such thing

. If someone can point me to the right tool and it's cheap enough, I would love to open it up.

G Fo12ce · 12-15-2009, 12:55 PM

Quote:

Originally Posted by AK370Z

Very nice. Congrats on your first oil change. You went with the more powerful magnet option HP model (I have SS which is one grade below).

Upon my 1st oil change, I found metal shavings on the drain bolt. I was SO TEMPTED to open up the filter but I had no tools do such thing

. If someone can point me to the right tool and it's cheap enough, I would love to open it up.

I actually haven't changed the oil yet, waiting until 1200mi. I just added the filter magnet. What you said makes me want to see if I can swap the drain bolt really quick though too so I catch any additional shavings during the rest of the break in! I don't have any oil though to refill what will come out during a quick bolt swap so I'll have to get some on the way to work and do it tomorrow.

I've never cut a filter open either but how about something basic. You have a vice and a hack saw lol? Anyway I think ideally you would have wanted to cut it open with the magnet still attached, otherwise the particles may come loose from the can and drain with the oil. If you've already moved the magnet to a new filter they may not be there. I may get the cutting wheel. If I end up doing it I'll post pics.

vipor · 12-15-2009, 01:10 PM

Quote:

Originally Posted by G Fo12ce

I actually haven't changed the oil yet, waiting until 1200mi. I just added the filter magnet. What you said makes me want to see if I can swap the drain bolt really quick though too so I catch any additional shavings during the rest of the break in! I don't have any oil though to refill what will come out during a quick bolt swap so I'll have to get some on the way to work and do it tomorrow.

I've never cut a filter open either but how about something basic. You have a vice and a hack saw lol? Anyway I think ideally you would have wanted to cut it open with the magnet still attached, otherwise the particles may come loose from the can and drain with the oil. If you've already moved the magnet to a new filter they may not be there. I may get the cutting wheel. If I end up doing it I'll post pics.

I'd just wait until you actually change your oil. That, or just go ahead and change it. I put mine off until 3200 or so but many people on here get synthetic in there way early. No harm, just a little cost. I'd stay away from trying to "swap" the drain bolt.

upyoursenator · 12-19-2009, 05:00 PM

I haven't done my first oil change yet, I'm actually going in to the dealership to get it done tomorrow. My only concern is that the manual says to change the oil at 3,750 miles. But unfortunately with my hectic scheduling I've gone over about 1k without changing it. Should I worry, or just get it changed sooner next time like maybe on the next 2k?

AK370Z · 12-19-2009, 05:15 PM

Quote:

Originally Posted by upyoursenator

I haven't done my first oil change yet, I'm actually going in to the dealership to get it done tomorrow. My only concern is that the manual says to change the oil at 3,750 miles. But unfortunately with my hectic scheduling I've gone over about 1k without changing it. Should I worry, or just get it changed sooner next time like maybe on the next 2k?

Are you at 4750 ? if so, change your oil ASAP. Just follow the manual for the next changes. You should be okay. Though I should point out, this car takes a while to break in. Even my last oil sample showed signs of break in still.

upyoursenator · 12-20-2009, 12:47 AM

Thanks for the advise. I went ahead and changed the oil, and the car runs very smooth. Didn't realize it takes long to break in the engine. I wonder if that goes the same for the shifter. Its a bit notchy, but either than that it runs like silk.

pbpd4816 · 01-01-2010, 04:06 PM

Has anyone went with Amsoil Signature Series 0W-30 yet? I decided to go with Amsoil myself....should be here Monday. I also ordered an Amsoil oil filter and have already got the SS250 filtermag and Titek magnetic drain bolt here, ready to go. Will be changing the oil for the first time at 3,000 miles. Ordered the Amsoil products from LiquidZ. Thanks for an easy transaction!

12-09-2009, 10:01 AM	#199 (permalink)
vipor A True Z Fanatic Join Date: Aug 2009 Location: Euless, TX [ DFW ] Age: 42 Posts: 13,531 Drives: Nismo 09-0183 QAB Rep Power: 49	i just usually go to the store let it be to pick up the oil or filter or grab some food. making sure the temp led is around the 1/3 point and the oil temp is up near 160ish. this is when some "thickies" gloves come in handy. i've been burned by oil before, not fun. __________________ 2009 NISMO # 0193 \| QAB \| Albums! \| 05.04.10 (Dynojet) 291.94hp/248.28tq Oil Cooler (DIY) \| Custom Headlights \| GTSPEC Braces \| F.I. Long Tube Headers

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Headlight Mod for 370z - Real Pictures Inside	nogoodname	Exterior & Interior	190	02-20-2012 03:36 PM
AK370Z's Monterey Blue 370Z	AK370Z	Member's 370Z Gallery	144	09-20-2010 04:28 PM
Nissan 370Z Convertible pictures Leaked? 01.24.09	AK370Z	Nissan 370Z General Discussions	7	01-24-2009 06:46 AM
Edmunds.com: 2009 Nissan 370Z Inside Line Party and Video 11.16.08	AK370Z	Nissan 370Z Photos / Spyshots / Video / Media Gallery	9	11-19-2008 12:19 PM
Nissan USA releases Official Nissan 370Z pictures 10.29.08	AK370Z	Nissan 370Z Photos / Spyshots / Video / Media Gallery	15	11-10-2008 09:17 AM

12-09-2009, 01:13 AM	#197 (permalink)
ResQguy Enthusiast Member Join Date: Nov 2009 Location: Orange County Posts: 282 Drives: 09 370z PW AT Rep Power: 15	Ridiculous noob question here. I always thought you were supposed to change the oil when it was cool?

12-09-2009, 10:55 AM	#200 (permalink)
ResQguy Enthusiast Member Join Date: Nov 2009 Location: Orange County Posts: 282 Drives: 09 370z PW AT Rep Power: 15	Thanks guys.

12-09-2009, 06:23 PM	#202 (permalink)
Zcott Base Member Join Date: Jun 2009 Location: D/FW, Texas Posts: 89 Drives: 09 370Z Sport PG M6 Rep Power: 16	The last time a dealer touched one of my vehicles (a Toyota Tacoma) was to fix something they did after a cheap oil change and tire rotation. They over torqued the lugs so much, they had to DRILL two of them off the next time I took it in. They damaged the wheel in the process and had to give me a new one. No thanks... I can change my oil in less than an hour, and I KNOW it's been done correctly. Of course I like tinkering, so it's fun for me...

12-19-2009, 05:00 PM	#207 (permalink)
upyoursenator Base Member Join Date: Dec 2009 Location: Norwalk Posts: 5 Drives: 09 370Z MB M6 Sport Rep Power: 15	I haven't done my first oil change yet, I'm actually going in to the dealership to get it done tomorrow. My only concern is that the manual says to change the oil at 3,750 miles. But unfortunately with my hectic scheduling I've gone over about 1k without changing it. Should I worry, or just get it changed sooner next time like maybe on the next 2k?

12-20-2009, 12:47 AM	#209 (permalink)
upyoursenator Base Member Join Date: Dec 2009 Location: Norwalk Posts: 5 Drives: 09 370Z MB M6 Sport Rep Power: 15	Thanks for the advise. I went ahead and changed the oil, and the car runs very smooth. Didn't realize it takes long to break in the engine. I wonder if that goes the same for the shifter. Its a bit notchy, but either than that it runs like silk.

01-01-2010, 04:06 PM	#210 (permalink)
pbpd4816 Base Member Join Date: Sep 2009 Location: Pine Bluff, Arkansas Posts: 103 Drives: 09 370z B+S 6MT Blk Rep Power: 16	Has anyone went with Amsoil Signature Series 0W-30 yet? I decided to go with Amsoil myself....should be here Monday. I also ordered an Amsoil oil filter and have already got the SS250 filtermag and Titek magnetic drain bolt here, ready to go. Will be changing the oil for the first time at 3,000 miles. Ordered the Amsoil products from LiquidZ. Thanks for an easy transaction!