Nissan 370Z Forum  

DIY: Oil Cooler (scratch built install, lottsa pics).....>.

Oil cooler results Well I finally took the car one a little ride here in S Fl total 120 miles, Fl Turnpike and I95. Port Saint Lucie to DelRay Beach

Go Back   Nissan 370Z Forum > Nissan 370Z Tech Area > DIY Section (Do-It-Yourself)


Like Tree17Likes

Reply
 
LinkBack Thread Tools Display Modes
Old 06-25-2010, 07:35 PM   #226 (permalink)
Base Member
 
Billy830's Avatar
 
Join Date: Dec 2009
Location: Port Saint Lucie Fl.
Age: 78
Posts: 31
Drives: 370Z Mag Black 6sp m
Rep Power: 15
Billy830 is on a distinguished road
Default

Oil cooler results
Well I finally took the car one a little ride here in S Fl total 120 miles, Fl Turnpike and I95.
Port Saint Lucie to DelRay Beach and back.

To DelRay Outside Air Temp 93 cruising at 80-90 oil temps were at 210. Before oil cooler 220+
Back to PSL Outside Air Temp 86 cruising at 80-90 oil temps 195. Before oil cooler 220+.

Works good for me
Billy830 is offline   Reply With Quote
Old 07-07-2010, 03:40 AM   #227 (permalink)
Track Member
 
Join Date: Apr 2009
Location: CA
Posts: 887
Drives: 09 NISSAN 370Z
Rep Power: 417
cab83_750 has a reputation beyond reputecab83_750 has a reputation beyond reputecab83_750 has a reputation beyond reputecab83_750 has a reputation beyond reputecab83_750 has a reputation beyond reputecab83_750 has a reputation beyond reputecab83_750 has a reputation beyond reputecab83_750 has a reputation beyond reputecab83_750 has a reputation beyond reputecab83_750 has a reputation beyond reputecab83_750 has a reputation beyond repute
Default

Here are pics of my hose routing. Right, wrong, or indifferent, it was my way of taking into account the motor flexing right, left, up, down, etc. Oh, and I do realize the ties at the end are not recommended; however, I am keeping them anyway as they are only at the very end. So far so good:
Attached Images
File Type: jpg shocks 004.jpg (555.4 KB, 157 views)
File Type: jpg shocks 005.jpg (428.5 KB, 112 views)
File Type: jpg shocks 006.jpg (563.0 KB, 151 views)
File Type: jpg shocks 007.jpg (479.3 KB, 141 views)

Last edited by cab83_750; 07-07-2010 at 03:43 AM.
cab83_750 is offline   Reply With Quote
Old 07-07-2010, 09:07 AM   #228 (permalink)
Track Member
 
Cjanik's Avatar
 
Join Date: May 2009
Location: Las Vegas
Posts: 578
Drives: N/A
Rep Power: 17
Cjanik has a spectacular aura aboutCjanik has a spectacular aura about
Default

^^ very good idea for those worried about flex. tons of slack there!
Cjanik is offline   Reply With Quote
Old 07-10-2010, 11:59 PM   #229 (permalink)
A True Z Fanatic
 
spearfish25's Avatar
 
Join Date: Mar 2009
Location: Naples, FL
Posts: 4,117
Drives: to work
Rep Power: 1856
spearfish25 has a reputation beyond reputespearfish25 has a reputation beyond reputespearfish25 has a reputation beyond reputespearfish25 has a reputation beyond reputespearfish25 has a reputation beyond reputespearfish25 has a reputation beyond reputespearfish25 has a reputation beyond reputespearfish25 has a reputation beyond reputespearfish25 has a reputation beyond reputespearfish25 has a reputation beyond reputespearfish25 has a reputation beyond repute
Send a message via AIM to spearfish25
Default

I just installed mine and noticed a potential issue, though I'm hoping it's minor.

Look at Cab83's 3rd and 4th pictures (and see my pic). The sway bar is just above the lines and is unloaded while on jack stands. When we drop the car to the ground, the ends of the sway bar move up while the middle portion pivots down. This will push down on the lines, depending on your configuration. I'm hoping that loading the suspension in corners or braking doesn't move the sway enough to work the lines loose. The closer you run the lines to the sway hinge, the better off you'll be.

***A huge thanks to Modshack for all of his help with this. Made it a very simple install***
Attached Images
File Type: jpg photo.jpg (582.8 KB, 175 views)
__________________
2013 Cadillac V-Wagon, RIP Z

Last edited by spearfish25; 07-11-2010 at 12:15 AM.
spearfish25 is offline   Reply With Quote
Old 07-11-2010, 05:15 PM   #230 (permalink)
A True Z Fanatic
 
cossie1600's Avatar
 
Join Date: Jun 2009
Location: californee way
Posts: 5,380
Drives: 370, Leaf
Rep Power: 30
cossie1600 has a reputation beyond reputecossie1600 has a reputation beyond reputecossie1600 has a reputation beyond reputecossie1600 has a reputation beyond reputecossie1600 has a reputation beyond reputecossie1600 has a reputation beyond reputecossie1600 has a reputation beyond reputecossie1600 has a reputation beyond reputecossie1600 has a reputation beyond reputecossie1600 has a reputation beyond reputecossie1600 has a reputation beyond repute
Default

I didn't like how low the lines were sitting under the sway bar, I ended up running the lines over it by using the left side to run the inlet and right side of the bumper to run the outlet of the oil cooler


Last edited by cossie1600; 07-12-2010 at 12:27 AM.
cossie1600 is offline   Reply With Quote
Old 07-12-2010, 09:09 AM   #231 (permalink)
Track Member
 
Cjanik's Avatar
 
Join Date: May 2009
Location: Las Vegas
Posts: 578
Drives: N/A
Rep Power: 17
Cjanik has a spectacular aura aboutCjanik has a spectacular aura about
Default

^^ interesting.

I ran mine under the sway bar because the bar twists, it does not go up and down for the most part. And my line runs right next to the mounting point to the frame, so it wont move up or down in that area.

Did this on saturday, I used to get 220-230 on the way home everyday and it was only a 8 mile drive. I was afraid if i wanted to cruise for 20+ miles i'd be way up there so i went ahead and did this.
Cjanik is offline   Reply With Quote
Old 07-12-2010, 09:39 AM   #232 (permalink)
A True Z Fanatic
 
Modshack's Avatar
 
Join Date: Mar 2009
Location: Greenville NC
Posts: 2,883
Drives: 370Z Sport
Rep Power: 976
Modshack has a reputation beyond reputeModshack has a reputation beyond reputeModshack has a reputation beyond reputeModshack has a reputation beyond reputeModshack has a reputation beyond reputeModshack has a reputation beyond reputeModshack has a reputation beyond reputeModshack has a reputation beyond reputeModshack has a reputation beyond reputeModshack has a reputation beyond reputeModshack has a reputation beyond repute
Default

Quote:
Originally Posted by Cjanik View Post
^^ interesting.

I ran mine under the sway bar because the bar twists, it does not go up and down for the most part. And my line runs right next to the mounting point to the frame, so it wont move up or down in that area.

Did this on saturday, I used to get 220-230 on the way home everyday and it was only a 8 mile drive. I was afraid if i wanted to cruise for 20+ miles i'd be way up there so i went ahead and did this.
Yup...If the lines are run close to the pivot there is little movement. I just pulled my cooler off yesterday and noticed no issues with the lines. Temps went up 20 degrees to 220 on my drive after..
__________________

Steal my car! (SOLD)...Now Porsche Cayman S
Oil Cooler DIY: Here!
Modshack is offline   Reply With Quote
Old 07-12-2010, 09:42 AM   #233 (permalink)
A True Z Fanatic
 
m4a1mustang's Avatar
 
Join Date: Feb 2009
Location: Northern VA
Posts: 55,385
Drives: on two wheels
Rep Power: 6962
m4a1mustang has a reputation beyond reputem4a1mustang has a reputation beyond reputem4a1mustang has a reputation beyond reputem4a1mustang has a reputation beyond reputem4a1mustang has a reputation beyond reputem4a1mustang has a reputation beyond reputem4a1mustang has a reputation beyond reputem4a1mustang has a reputation beyond reputem4a1mustang has a reputation beyond reputem4a1mustang has a reputation beyond reputem4a1mustang has a reputation beyond repute
Default

Quote:
Originally Posted by Modshack View Post
Yup...If the lines are run close to the pivot there is little movement. I just pulled my cooler off yesterday and noticed no issues with the lines. Temps went up 20 degrees to 220 on my drive after..
Does my Modshack-sense detect a pending sale of said oil cooler kit?
__________________
- Steve
MAZOC Meet Thread
Zs & Coffee - Saturdays at 10AM in Fairfax, VA and Columbia, MD (Click the banner!)
LIKE us on Facebook!
m4a1mustang is offline   Reply With Quote
Old 07-12-2010, 10:25 AM   #234 (permalink)
A True Z Fanatic
 
Modshack's Avatar
 
Join Date: Mar 2009
Location: Greenville NC
Posts: 2,883
Drives: 370Z Sport
Rep Power: 976
Modshack has a reputation beyond reputeModshack has a reputation beyond reputeModshack has a reputation beyond reputeModshack has a reputation beyond reputeModshack has a reputation beyond reputeModshack has a reputation beyond reputeModshack has a reputation beyond reputeModshack has a reputation beyond reputeModshack has a reputation beyond reputeModshack has a reputation beyond reputeModshack has a reputation beyond repute
Default

Quote:
Originally Posted by m4a1mustang View Post
Does my Modshack-sense detect a pending sale of said oil cooler kit?
Errr...yeah, to my buddy Zpirate...He needs more Modshack Luv...Sorry!
__________________

Steal my car! (SOLD)...Now Porsche Cayman S
Oil Cooler DIY: Here!
Modshack is offline   Reply With Quote
Old 07-12-2010, 10:28 AM   #235 (permalink)
A True Z Fanatic
 
m4a1mustang's Avatar
 
Join Date: Feb 2009
Location: Northern VA
Posts: 55,385
Drives: on two wheels
Rep Power: 6962
m4a1mustang has a reputation beyond reputem4a1mustang has a reputation beyond reputem4a1mustang has a reputation beyond reputem4a1mustang has a reputation beyond reputem4a1mustang has a reputation beyond reputem4a1mustang has a reputation beyond reputem4a1mustang has a reputation beyond reputem4a1mustang has a reputation beyond reputem4a1mustang has a reputation beyond reputem4a1mustang has a reputation beyond reputem4a1mustang has a reputation beyond repute
Default

Quote:
Originally Posted by Modshack View Post
Errr...yeah, to my buddy Zpirate...He needs more Modshack Luv...Sorry!
It's all good. You're cooler is too small for me, anyways.

__________________
- Steve
MAZOC Meet Thread
Zs & Coffee - Saturdays at 10AM in Fairfax, VA and Columbia, MD (Click the banner!)
LIKE us on Facebook!
m4a1mustang is offline   Reply With Quote
Old 10-01-2010, 12:39 PM   #236 (permalink)
Track Member
 
Join Date: Apr 2009
Location: CA
Posts: 887
Drives: 09 NISSAN 370Z
Rep Power: 417
cab83_750 has a reputation beyond reputecab83_750 has a reputation beyond reputecab83_750 has a reputation beyond reputecab83_750 has a reputation beyond reputecab83_750 has a reputation beyond reputecab83_750 has a reputation beyond reputecab83_750 has a reputation beyond reputecab83_750 has a reputation beyond reputecab83_750 has a reputation beyond reputecab83_750 has a reputation beyond reputecab83_750 has a reputation beyond repute
Default

Hey modshack

Do you know if the Stillen package (including the other cooler packages) use the same hose routing as yours? I don't envision the SS braided lines can be routed in the hole per Vipor's thread.

Thanks
cab83_750 is offline   Reply With Quote
Old 10-01-2010, 04:52 PM   #237 (permalink)
A True Z Fanatic
 
Modshack's Avatar
 
Join Date: Mar 2009
Location: Greenville NC
Posts: 2,883
Drives: 370Z Sport
Rep Power: 976
Modshack has a reputation beyond reputeModshack has a reputation beyond reputeModshack has a reputation beyond reputeModshack has a reputation beyond reputeModshack has a reputation beyond reputeModshack has a reputation beyond reputeModshack has a reputation beyond reputeModshack has a reputation beyond reputeModshack has a reputation beyond reputeModshack has a reputation beyond reputeModshack has a reputation beyond repute
Default

Quote:
Originally Posted by cab83_750 View Post
Hey modshack

Do you know if the Stillen package (including the other cooler packages) use the same hose routing as yours? I don't envision the SS braided lines can be routed in the hole per Vipor's thread.

Thanks
No idea if the hose lengths allow that or not. Plus some use AN8 lines which are smaller and can be routed as Vipor did. The larger AN10 lines may not fit..
__________________

Steal my car! (SOLD)...Now Porsche Cayman S
Oil Cooler DIY: Here!
Modshack is offline   Reply With Quote
Old 12-06-2010, 07:56 PM   #238 (permalink)
Base Member
 
FastJew's Avatar
 
Join Date: Oct 2009
Location: Denton, TX
Posts: 58
Drives: 2009/370z/TS/6MT
Rep Power: 16
FastJew is on a distinguished road
Default

First I gotta say thanks Modshack

And then thanks to all the other input on this thread that helped me put together what I think is a rock solid install.

Decided to go with the stainless steel lines even though the assembly is a little tougher it makes for a lot of piece of mind. Routed the lines over the sway bar and to the driver side. This was done using one 90 fitting and one 45 deg, which allowed the lines to easily clear the sway bar. I didn't like the idea of the lines being that low on the car (crappy roads here).

Results, ECR track day and temps never got above 230.

This is opposed to my first track day being cut short with 280 deg temps.

Hopes this helps any others attempting this install.







__________________
09 370Z - FI TDX CBE/Stillen G3/FI HFC's are next
06 Xterra OR - 3" SL - 33" Pro-Comp MT's - Shrockworks Sliders & Rear Bumper/Tire Carrier - Stillen Cross Drilled Rotors/Pads
FastJew is offline   Reply With Quote
Old 12-14-2010, 01:58 AM   #239 (permalink)
Track Member
 
Holliday's Avatar
 
Join Date: Aug 2009
Location: Cache, OK
Age: 38
Posts: 916
Drives: in the fast lane....
Rep Power: 17
Holliday will become famous soon enoughHolliday will become famous soon enough
Default

^^ Looks Good ^^
__________________
Holliday is offline   Reply With Quote
Old 01-23-2011, 07:39 PM   #240 (permalink)
Base Member
 
bigrob126's Avatar
 
Join Date: Jan 2011
Location: Las Vegas NV
Posts: 134
Drives: 2009 370Z Sport Auto
Rep Power: 14
bigrob126 is on a distinguished road
Default

I dont even have my 370 yet, but am likely going to do this mod. Was wondering if you used the same mock bracket up top as at the bottom and is there a place to mount the top, such as the lower composite piece used?....and does this mounting setup leave a space between the oil cooler and the rad, or do they touch, in which case I would need some rubber in between?

Thanks!!

Rob
bigrob126 is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
DIY: Stillen 19 Row Oil Cooler Install - driver side (stock PS cooler unmoved) djpathfinder DIY Section (Do-It-Yourself) 21 11-30-2015 06:47 AM
Real Auto Dynamics built and R/T tuned built motor TT Mr.Squeeze Forced Induction 132 04-18-2014 07:09 PM
Anyone done a DIY for a 34r cooler install? bigdog1250 DIY Section (Do-It-Yourself) 7 07-05-2012 11:38 AM
Oil Cooler Install Zedx Engine & Drivetrain 10 05-19-2011 03:35 AM
install oil cooler? Mt Tam I am Nissan 370Z General Discussions 5 08-25-2010 10:08 AM


All times are GMT -5. The time now is 04:36 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2