![]() |
This 'slack issue' appears to be the unknown and the biggest concern. What is unknown, at least to me, is the direction of the pull against the hose. In other
|
|
LinkBack | Thread Tools | Display Modes |
![]() |
#11 (permalink) |
Track Member
Join Date: Apr 2009
Location: CA
Posts: 887
Drives: 09 NISSAN 370Z
Rep Power: 417 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
![]()
This 'slack issue' appears to be the unknown and the biggest concern. What is unknown, at least to me, is the direction of the pull against the hose. In other words, is the motor pulling, pushing....? Coupled with the sway bar movement, is the hose being pulled up and/or down?
My hoses were routed in an 'S' shape form to allow for left/right/up/down/forward/back movements of the motor and sway bar. This of course, is my non-engineering guess/solution. I will post pictures soon and will welcome any type of input/flame. ![]() So far, I do not have any issues with the socketless setup. I do plan on removing the 'collars' where the hoses end. I believe they are there for aesthetic purposes. Once removed, I will use one (just 1) small clamp or zip-tie. I do not think having once clamp at the very end of the hose will Not destroy the inner lining of the hose. Last edited by cab83_750; 04-26-2010 at 07:00 AM. |
![]() |
![]() |
Bookmarks |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
DIY: Stillen 19 Row Oil Cooler Install - driver side (stock PS cooler unmoved) | djpathfinder | DIY Section (Do-It-Yourself) | 21 | 11-30-2015 05:47 AM |
Real Auto Dynamics built and R/T tuned built motor TT | Mr.Squeeze | Forced Induction | 132 | 04-18-2014 06:09 PM |
Anyone done a DIY for a 34r cooler install? | bigdog1250 | DIY Section (Do-It-Yourself) | 7 | 07-05-2012 10:38 AM |
Oil Cooler Install | Zedx | Engine & Drivetrain | 10 | 05-19-2011 02:35 AM |
install oil cooler? | Mt Tam I am | Nissan 370Z General Discussions | 5 | 08-25-2010 09:08 AM |